[OpenTRV-dev] squashfs

Bo Herrmannsen EMAIL ADDRESS HIDDEN
Wed Apr 10 21:59:34 BST 2013


so i tried to format it in diskutil and then run it all again…. did not work:

sudo dd bs=1m if=emoncmspi.img of=/dev/rdisk4dd: /dev/rdisk4: Device not configured
277+0 records in
276+0 records out
289406976 bytes transferred in 26.220936 secs (11037248 bytes/sec)

/bo


Den 10/04/2013 kl. 22.26 skrev Stuart Poulton:

> Try the instructions listed here
> 
> http://elinux.org/RPi_Easy_SD_Card_Setup#Copying_an_image_to_the_SD_card_in_Mac.C2.A0OS.C2.A0X_.28command_line.29
> 
> Obviously PLEASE PLEASE PLEASE make sure you get the right device.
> 
> Stuart
> 
> 
> On 10 Apr 2013, at 21:17, Bo Herrmannsen wrote:
> 
>> so i came around to using DD…. but now it will still not boot on the pi…
>> 
>> i put it back in my mac but the partition is listed as inactive…. what could be wrong?
>> 
>> 
>> /bo
>> 
>> Den 10/04/2013 kl. 15.22 skrev Stuart Poulton:
>> 
>>> Bo.
>>> 
>>> you can use dd on a mac :)
>>> 
>>> Stuart
>>> 
>>> On 10/04/13 14:18, Bo Herrmannsen wrote:
>>>> i could go out an buy one so yes…. they are not that expensive…
>>>> 
>>>> but what is the for dummies step by step to write the image?
>>>> 
>>>> mvh bo
>>>> 
>>>> Den 10/04/2013 kl. 15.16 skrev Stuart Poulton:
>>>> 
>>>>> Hi,
>>>>> 
>>>>> Honestly I think you're fighting a losing battle. Can you get an SD card reader for your MAC ?
>>>>> Failing that I'm happy to write an SD card for you.
>>>>> 
>>>>> Stuart
>>>>> 
>>>>> On 10/04/13 12:45, Bo Herrmannsen wrote:
>>>>>> thats what i'm trying… but berry boot says its not in squashes format….
>>>>>> 
>>>>>> 
>>>>>> Den 10/04/2013 kl. 07.42 skrev Stuart Poulton:
>>>>>> 
>>>>>>> Any reason not to use the emonCMS raspberry PI image ?
>>>>>>> 
>>>>>>> Stuart
>>>>>>> 
>>>>>>> 
>>>>>>> On 10/04/13 00:44, Bo Herrmannsen wrote:
>>>>>>>> hi
>>>>>>>> 
>>>>>>>> a minor side Q…. is ist possible to convert a rasberry pi sd card image to squashfs format?
>>>>>>>> 
>>>>>>>> why i ask is that while i can download and extract the image for open energy's cms system i can't get it to boot….
>>>>>>>> 
>>>>>>>> so i tried to use berry boot and most of the way it going smooth…
>>>>>>>> 
>>>>>>>> 1 i boot with berry boot from a 2 gb sd card… on a sub stick i have the img file from open energy
>>>>>>>> 2. when berry ask where to install i swap the sd card for a 4 gb class 10… it formats the card…
>>>>>>>> 3. when i'm asked what os to install i click cancel and get an option to click on add os… i just hold down the mouse buttom a bit to get an option to load from usb stick
>>>>>>>> 4. i select the img file but i am told its not in squashfs format….
>>>>>>>> 
>>>>>>>> 
>>>>>>>> is there a way to convert?
>>>>>>>> 
>>>>>>>> i have a mac pc and windows 7… no linux sorry…
>>>>>>>> 
>>>>>>>> 
>>>>>>>> /bo
>>>>>>>> 
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> EMAIL ADDRESS HIDDEN
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> EMAIL ADDRESS HIDDEN
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> EMAIL ADDRESS HIDDEN
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>> 
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> EMAIL ADDRESS HIDDEN
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> 
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130410/f1106183/attachment.html>


More information about the OpenTRV-dev mailing list