[OpenTRV-dev] squashfs
Bo Herrmannsen
EMAIL ADDRESS HIDDEN
Wed Apr 10 22:37:22 BST 2013
seems ok:
Bos-Mac-Pro:desktop boherrmannsen$ sudo diskutil unmount /dev/disk4s1Volume (null) on disk4s1 unmounted
Bos-Mac-Pro:desktop boherrmannsen$ sudo dd bs=1m if=emoncmspi.img of=/dev/disk4
Broadcast Message from EMAIL ADDRESS HIDDEN
(no tty) at 23:34 CEST...
Apr 10 23:34:21 Bos-Mac-Pro kernel[0]:
Broadcast Message from EMAIL ADDRESS HIDDEN
(no tty) at 23:34 CEST...
Apr 10 23:34:23 Bos-Mac-Pro kernel[0]:
Broadcast Message from EMAIL ADDRESS HIDDEN
(no tty) at 23:34 CEST...
Apr 10 23:34:25 Bos-Mac-Pro kernel[0]:
1886+0 records in
1886+0 records out
1977614336 bytes transferred in 270.703883 secs (7305452 bytes/sec)
Den 10/04/2013 kl. 23.26 skrev Stuart Poulton:
> Ok.
>
> Try
>
> sudo dd if=path_of_your_image.img of=/dev/diskn bs=1m
>
> Basically what you've previously done but with diskn not rdiskn
>
>
>
> On 10 Apr 2013, at 22:24, Bo Herrmannsen wrote:
>
>> Bos-Mac-Pro:~ boherrmannsen$ ls -l /dev/disk4
>> brw-r----- 1 boherrmannsen operator 14, 11 10 Apr 23:23 /dev/disk4
>> Bos-Mac-Pro:~ boherrmannsen$
>>
>>
>> Den 10/04/2013 kl. 23.21 skrev Stuart Poulton:
>>
>>> Long shot
>>>
>>> Can you paste the output of
>>>
>>> ls -l /dev/disk4
>>>
>>>
>>>
>>>
>>>>>> sudo dd bs=1m if=emoncmspi.img of=/dev/rdisk4
>>>
>>>
>>> On 10 Apr 2013, at 22:18, Bo Herrmannsen wrote:
>>>
>>>> the message was to big… over 40 kb….
>>>>
>>>> trying to put them i dropbox
>>>>
>>>> Den 10/04/2013 kl. 23.05 skrev Stuart Poulton:
>>>>
>>>>> Are you sure it's still /dev/rdisk4 ?
>>>>>
>>>>> Stuart
>>>>> On 10 Apr 2013, at 21:59, Bo Herrmannsen wrote:
>>>>>
>>>>>> so i tried to format it in diskutil and then run it all again…. did not work:
>>>>>>
>>>>>> sudo dd bs=1m if=emoncmspi.img of=/dev/rdisk4dd: /dev/rdisk4: Device not configured
>>>>>> 277+0 records in
>>>>>> 276+0 records out
>>>>>> 289406976 bytes transferred in 26.220936 secs (11037248 bytes/sec)
>>>>>>
>>>>>> /bo
>>>>>>
>>>>>>
>>>>>> Den 10/04/2013 kl. 22.26 skrev Stuart Poulton:
>>>>>>
>>>>>>> Try the instructions listed here
>>>>>>>
>>>>>>> http://elinux.org/RPi_Easy_SD_Card_Setup#Copying_an_image_to_the_SD_card_in_Mac.C2.A0OS.C2.A0X_.28command_line.29
>>>>>>>
>>>>>>> Obviously PLEASE PLEASE PLEASE make sure you get the right device.
>>>>>>>
>>>>>>> Stuart
>>>>>>>
>>>>>>>
>>>>>>> On 10 Apr 2013, at 21:17, Bo Herrmannsen wrote:
>>>>>>>
>>>>>>>> so i came around to using DD…. but now it will still not boot on the pi…
>>>>>>>>
>>>>>>>> i put it back in my mac but the partition is listed as inactive…. what could be wrong?
>>>>>>>>
>>>>>>>>
>>>>>>>> /bo
>>>>>>>>
>>>>>>>> Den 10/04/2013 kl. 15.22 skrev Stuart Poulton:
>>>>>>>>
>>>>>>>>> Bo.
>>>>>>>>>
>>>>>>>>> you can use dd on a mac :)
>>>>>>>>>
>>>>>>>>> Stuart
>>>>>>>>>
>>>>>>>>> On 10/04/13 14:18, Bo Herrmannsen wrote:
>>>>>>>>>> i could go out an buy one so yes…. they are not that expensive…
>>>>>>>>>>
>>>>>>>>>> but what is the for dummies step by step to write the image?
>>>>>>>>>>
>>>>>>>>>> mvh bo
>>>>>>>>>>
>>>>>>>>>> Den 10/04/2013 kl. 15.16 skrev Stuart Poulton:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> Honestly I think you're fighting a losing battle. Can you get an SD card reader for your MAC ?
>>>>>>>>>>> Failing that I'm happy to write an SD card for you.
>>>>>>>>>>>
>>>>>>>>>>> Stuart
>>>>>>>>>>>
>>>>>>>>>>> On 10/04/13 12:45, Bo Herrmannsen wrote:
>>>>>>>>>>>> thats what i'm trying… but berry boot says its not in squashes format….
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Den 10/04/2013 kl. 07.42 skrev Stuart Poulton:
>>>>>>>>>>>>
>>>>>>>>>>>>> Any reason not to use the emonCMS raspberry PI image ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Stuart
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 10/04/13 00:44, Bo Herrmannsen wrote:
>>>>>>>>>>>>>> hi
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> a minor side Q…. is ist possible to convert a rasberry pi sd card image to squashfs format?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> why i ask is that while i can download and extract the image for open energy's cms system i can't get it to boot….
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> so i tried to use berry boot and most of the way it going smooth…
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 1 i boot with berry boot from a 2 gb sd card… on a sub stick i have the img file from open energy
>>>>>>>>>>>>>> 2. when berry ask where to install i swap the sd card for a 4 gb class 10… it formats the card…
>>>>>>>>>>>>>> 3. when i'm asked what os to install i click cancel and get an option to click on add os… i just hold down the mouse buttom a bit to get an option to load from usb stick
>>>>>>>>>>>>>> 4. i select the img file but i am told its not in squashfs format….
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> is there a way to convert?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> i have a mac pc and windows 7… no linux sorry…
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /bo
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> EMAIL ADDRESS HIDDEN
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> EMAIL ADDRESS HIDDEN
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> EMAIL ADDRESS HIDDEN
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> EMAIL ADDRESS HIDDEN
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> EMAIL ADDRESS HIDDEN
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130410/5c61a191/attachment-0001.html>
More information about the OpenTRV-dev
mailing list