[OpenTRV-dev] OT: first draft for reflow controller

[Bo Herrmannsen]

started designing  a box for this small project... so far the part for the
board is done.. tomorrow i will be out a bit but will add a section for the
ssr+IEC plug... if there is time left over i will add section for the pi
too...

is there need for hdmi or anything else from the pi itself?

/bo


2013/6/22 Mike Stirling <EMAIL ADDRESS HIDDEN>

>  How are you for clearance between the HV part and the components on the
> Pi?  Particularly the HDMI connector.  I'd seriously consider putting the
> mains stuff on a separate board so that you don't need to worry about
> things in 3 dimensions!
>
> Mike
>
> On 21/06/13 21:37, Bo Herrmannsen wrote:
>
> Hope it is of use
>
>
> _______________________________________________
> OpenTRV-dev mailing EMAIL ADDRESS HIDDEN://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130623/59d21239/attachment.html>