[OpenTRV-dev] its alive....

[Bo Herrmannsen]

so i got my water meter in the emon system... now 2 q's in my head

should i just transfer the number of pulses and let emoncms figure how much
water used? or let the board do the calc and transfer?

and would it be better to reset for each loop so the number of pulses dont
just increase?

/bo

2013/5/18 Mike Stirling <EMAIL ADDRESS HIDDEN>

>  Bo,
>
> Once you get the irda interface working, send me a sample of the data you
> get over the serial and I will write you a Python script to submit to
> emoncms.  You will need a Pi to run it on, but that could be the same one
> that's doing your logging.
>
> Mike
>
>
> On 18/05/13 02:27, Bo Herrmannsen wrote:
>
> finally got emon cms working
>
> http://87.51.52.114/emoncms/raspi&id=1
>
> for now just the outdoor temp... after some sleep i will add my hotwater
> cylinder
>
> and then the water meter and later heat meter
>
>
>
> if anyone knows i have this Q....
>
> my heat meter have about 6 values i can read out of it via a irda port...
> i have an arduino sketch for it so i dont think it will be any problem...
> thou this sketch just delivers to serial port... one line with each picked
> value... so if i cant not figure it who can help out with a sketch that can
> send those values?
>
> and next q is if emon cms can subtract to values and store that? or is
> that better done on board?
>
> /bo
>
>
> _______________________________________________
> OpenTRV-dev mailing EMAIL ADDRESS HIDDEN://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130518/2b65cfd7/attachment.html>