[OpenTRV-dev] Mass box printing

[Bo Herrmannsen]

Pronterface says:

4631.27473342 mm of filament used in this print

that is for all 4 layers in one go at best resolution the printer can (0.1mm layer hight) print time is an insane 6 hours... at 0.2 mm it would be half... and at 0.3mm it would be 2 hours


Den 27/11/2013 kl. 08.41 skrev Stuart Poulton:

> "Most service bureaux charge per unit volume of material used in the building of the model, and not the total volume. We like to do it a little different…. we charge for the total swept volume of the part, but at about a tenth of the cost of the going rate!"
> 
> Which seems like a fair way to do it.
> 
> On 27/11/13 07:39, Bo Herrmannsen wrote:
>> 90cm3 seems like a lot... does that assume its hollow?
>> 
>> /bo
>> 
>> Den 27/11/2013 kl. 08.36 skrev Stuart Poulton:
>> 
>>> Ok, taking the URL below, and making the following assumptions
>>> 
>>> OpenTRV box is ~ 5.5cm x 5.5cm x 3cm
>>> 
>>> This gives a swept volume of 90.75 cm3, at 10pence per cm3, total price is £9.75 + VAT
>>> 
>>> I appreciate that 3d printing is great, but for that sort of price I can get a nice case that looks like this
>>> 
>>> https://dl.dropboxusercontent.com/u/6014682/IMG_0434.JPG
>>> 
>>> 
>>> Stuart
>>> 
>>> 
>>> On 26/11/13 21:26, Bruno Girin wrote:
>>>> I got some prints done by those guys before I had a 3D printer: http://www.3dprint-uk.co.uk/
>>>> 
>>>> They are based in Brick Lane and the prints are of very good quality. The only downside is that they do any colour as long as it's white.
>>>> 
>>>> 
>>>> On 26 November 2013 17:03, Damon Hart-Davis <EMAIL ADDRESS HIDDEN <mailto:EMAIL ADDRESS HIDDEN>> wrote:
>>>> 
>>>>    Hi,
>>>> 
>>>>    I would like to have a small number of the current OpenTRV box
>>>>    design printed by (say) 2 different organisations in preparation
>>>>    for printing up 40 or more very soon for the trial, to find out
>>>>    who is reliable and produces good prints and is easy to deal with.
>>>> 
>>>>    Would you like to suggest one or more to test out in this way?
>>>>     Might be commercial or not (eg TVRRUG).
>>>> 
>>>>    Rgds
>>>> 
>>>>    Damon
>>>> 
>>>> 
>>>> 
>>>> 
>>>> -- 
>>>> Bruno
>>>> Visit my weblog: http://brunogirin.blogspot.com
>>>> 
>>>> 
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> EMAIL ADDRESS HIDDEN
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> EMAIL ADDRESS HIDDEN
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20131127/df0938db/attachment.html>