[OpenTRV-dev] Mass box printing

Thu Nov 28 10:30:37 GMT 2013

it is now

but if you dig in their history it might be they started with 3d printing

/bo

Den 28/11/2013 kl. 11.26 skrev Adrian Godwin:

> Wasn't it laser cut in slices ? I seem to remember them buying a bigger, better laser on the strength of the orders.
> 
> 
> 
> 
> On Thu, Nov 28, 2013 at 10:13 AM, Bruno Girin <EMAIL ADDRESS HIDDEN> wrote:
> Maybe we should ask the Pimoroni guys how they mass-produce their pibow? At the end of the day, they started the same with 3D printed models that they subsequently productised.
> 
> 
> On 28 November 2013 07:28, Damon Hart-Davis <EMAIL ADDRESS HIDDEN> wrote:
> Hi
> 
> From what I can see 100 is about the cross-over point.
> 
> For the trial run many many parts of the system cost far more than they would as productised.  What I don’t have is a huge workshop or great hand-crafting skills, so paying somewhat over the odds for something that (a) we can easily adjust in the way we have already through several revisions, and (b) that I do not have to attack with various tools, is probably money well spent.
> 
> I’d prefer to spend £5 per box for at least the first main run of 30–40, and decide what to do thereafter, ie if we do an extended trial run on an additional 100.  I do not want to spend 2h on printing each of those boxes taking time off work to do so for example (or make Bo do them!).
> 
> Rgds
> 
> Damon
> 
> PS.  With luck our STL or OpenSCAD models can go to an injection moulding place for fairly easy adaptation or use as-is.
> 
> On 28 Nov 2013, at 06:52, Philip Canavan <EMAIL ADDRESS HIDDEN> wrote:
> 
> > If it's that order of cost then is it worthwhile looking into injection? I believe there are some low-volume shops designed for prototyping; 100-off would presumably be a viable (or even large) order for them. Anyone know where the tipping point is likely to be? I'm assuming the current solid models can be re-used.
> >
> >
> > From: Damon Hart-Davis <EMAIL ADDRESS HIDDEN>
> > To: Closed list for developer discussions <EMAIL ADDRESS HIDDEN>
> > Sent: Wednesday, 27 November 2013, 9:18
> > Subject: Re: [OpenTRV-dev] Mass box printing
> >
> > I do 0.3mm layers; 2h is about right.  Which is why I don’t want to tie your life up on mass production.
> >
> > Rgds
> >
> > Damon
> >
> >
> > On 27 Nov 2013, at 08:56, Bo Herrmannsen <EMAIL ADDRESS HIDDEN> wrote:
> >
> > > Pronterface says:
> > >
> > > 4631.27473342 mm of filament used in this print
> > >
> > > that is for all 4 layers in one go at best resolution the printer can (0.1mm layer hight) print time is an insane 6 hours... at 0.2 mm it would be half... and at 0.3mm it would be 2 hours
> > >
> > >
> > > Den 27/11/2013 kl. 08.41 skrev Stuart Poulton:
> > >
> > >> "Most service bureaux charge per unit volume of material used in the building of the model, and not the total volume. We like to do it a little different…. we charge for the total swept volume of the part, but at about a tenth of the cost of the going rate!"
> > >>
> > >> Which seems like a fair way to do it.
> > >>
> > >> On 27/11/13 07:39, Bo Herrmannsen wrote:
> > >>> 90cm3 seems like a lot... does that assume its hollow?
> > >>>
> > >>> /bo
> > >>>
> > >>> Den 27/11/2013 kl. 08.36 skrev Stuart Poulton:
> > >>>
> > >>>> Ok, taking the URL below, and making the following assumptions
> > >>>>
> > >>>> OpenTRV box is ~ 5.5cm x 5.5cm x 3cm
> > >>>>
> > >>>> This gives a swept volume of 90.75 cm3, at 10pence per cm3, total price is £9.75 + VAT
> > >>>>
> > >>>> I appreciate that 3d printing is great, but for that sort of price I can get a nice case that looks like this
> > >>>>
> > >>>> https://dl.dropboxusercontent.com/u/6014682/IMG_0434.JPG
> > >>>>
> > >>>>
> > >>>> Stuart
> > >>>>
> > >>>>
> > >>>> On 26/11/13 21:26, Bruno Girin wrote:
> > >>>>> I got some prints done by those guys before I had a 3D printer: http://www.3dprint-uk.co.uk/
> > >>>>>
> > >>>>> They are based in Brick Lane and the prints are of very good quality. The only downside is that they do any colour as long as it's white.
> > >>>>>
> > >>>>>
> > >>>>> On 26 November 2013 17:03, Damon Hart-Davis <EMAIL ADDRESS HIDDEN <mailto:EMAIL ADDRESS HIDDEN>> wrote:
> > >>>>>
> > >>>>>    Hi,
> > >>>>>
> > >>>>>    I would like to have a small number of the current OpenTRV box
> > >>>>>    design printed by (say) 2 different organisations in preparation
> > >>>>>    for printing up 40 or more very soon for the trial, to find out
> > >>>>>    who is reliable and produces good prints and is easy to deal with.
> > >>>>>
> > >>>>>    Would you like to suggest one or more to test out in this way?
> > >>>>>    Might be commercial or not (eg TVRRUG).
> > >>>>>
> > >>>>>    Rgds
> > >>>>>
> > >>>>>    Damon
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> --
> > >>>>> Bruno
> > >>>>> Visit my weblog: http://brunogirin.blogspot.com
> > >>>>>
> > >>>>>
> > >>>>> _______________________________________________
> > >>>>> OpenTRV-dev mailing list
> > >>>>> EMAIL ADDRESS HIDDEN
> > >>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> > >>>> _______________________________________________
> > >>>> OpenTRV-dev mailing list
> > >>>> EMAIL ADDRESS HIDDEN
> > >>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >>> _______________________________________________
> > >>> OpenTRV-dev mailing list
> > >>> EMAIL ADDRESS HIDDEN
> > >>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >>
> > >> _______________________________________________
> > >> OpenTRV-dev mailing list
> > >> EMAIL ADDRESS HIDDEN
> > >> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >
> > > _______________________________________________
> > > OpenTRV-dev mailing list
> > > EMAIL ADDRESS HIDDEN
> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> >
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> 
> 
> 
> -- 
> Bruno
> Visit my weblog: http://brunogirin.blogspot.com
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> 
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20131128/a7dd5b68/attachment-0001.html>