[OpenTRV-dev] London Cleanweb meetup on Monday

[Damon Hart-Davis]

For me Maplin / Velleman supply it matched for the printer and its default settings.

Generally best to get PLA stock from the usual supplier for that printer with same temp (etc) settings I suspect.

Rgds

Damon



On 20 Oct 2013, at 18:55, Bo Herrmannsen wrote:

> not sure if hackspace has that kind...
> 
> but i could as well just get an spool or 2 of it and bring it
> 
> where do you get it?
> 
> 
> 
> -----Oprindelig meddelelse----- From: Damon Hart-Davis
> Sent: Sunday, October 20, 2013 7:54 PM
> To: Closed list for developer discussions
> Subject: Re: [OpenTRV-dev] London Cleanweb meetup on Monday
> 
> Well, the translucent stuff is pretty good without tricks like that.  I quite like having the whole front of the box glow a little when the LED comes on...  B^>
> 
> Rgds
> 
> Damon
> 
> 
> On 20 Oct 2013, at 18:34, Bo Herrmannsen wrote:
> 
>> hmm
>> 
>> if doing in white PLA we can make an area of the lid thin enough to messure light but thick enough that it looks solid
>> 
>> 
>> 
>> -----Oprindelig meddelelse----- From: Damon Hart-Davis
>> Sent: Sunday, October 20, 2013 7:28 PM
>> To: Closed list for developer discussions
>> Subject: Re: [OpenTRV-dev] London Cleanweb meetup on Monday
>> 
>> Bo,
>> 
>> If I can steal some more of Bruno's time to finish the OpenTRV REV1 box in all its glory, then we can all print that box design.
>> 
>> Current plan would be to have the lid in natural/transparent (just being playing with that type of PLA today) so that LDR and LED don't need any penetrations, and rest of box the same or opaque white.
>> 
>> Rgds
>> 
>> Damon
>> 
>> 
>> On 20 Oct 2013, at 18:11, Bo Herrmannsen wrote:
>> 
>>> my hacker space should have both their printers back this comming week so i could help out mass printing... one doing one half the box and the other the other half... several copies at same time of course
>>> 
>>> i just need an STL i can drop in makerware, that is what they use and it makes it as easy as inserting an SD card once there and press start
>>> 
>>> 
>>> /bo
>>> 
>>> -----Oprindelig meddelelse----- From: Damon Hart-Davis
>>> Sent: Sunday, October 20, 2013 7:06 PM
>>> To: Closed list for developer discussions
>>> Subject: Re: [OpenTRV-dev] London Cleanweb meetup on Monday
>>> 
>>> Hi,
>>> 
>>> I'm going to run a batch of boards through Bo and another through a professional board- making and stuffing company who will also source most of the components thus minimising my effort.
>>> 
>>> Bo should hang on of what he builds to enough to fully wire his flat for OpenTRV and return the rest for my testing and development.
>>> 
>>> The other batch should go to our first trial participants.
>>> 
>>> We'll need the boxes sorted too, though may farm out the printing of all but the first few to a professional company, again to minimise time on manual and admin tasks for me.
>>> 
>>> Rgds
>>> 
>>> Damon
>>> 
>>> 
>>> On 20 Oct 2013, at 16:52, Bo Herrmannsen wrote:
>>> 
>>>> I would if i was able....
>>>> 
>>>> hmm.... could we add some facetime/google hangout on top of the actual meeting?
>>>> 
>>>> as for those that dont know i'm almost ready for batch mass assembly: oven adjusted and runs ok, manual pick&place also working.... only bit missing is the solder paste dispenser that is currently in the hands of danish customs "service"... should be released monday or day after
>>>> 
>>>> /bo
>>>> 
>>>> -----Oprindelig meddelelse----- From: Damon Hart-Davis
>>>> Sent: Sunday, October 20, 2013 5:14 PM
>>>> To: Closed list for developer discussions
>>>> Subject: [OpenTRV-dev] London Cleanweb meetup on Monday
>>>> 
>>>> http://www.meetup.com/Cleanweb-London
>>>> 
>>>> Does anyone (in London) fancy meeting there to discuss various things such as the DD Hackathon and getting the first run of 30 boards made (and boxes too)?
>>>> 
>>>> I'm in two minds because I'd rather be assured of having the time get the PCB finished and off to PMS on Monday and I still have quite a lot of catching up to do since before the Hackathon!
>>>> 
>>>> Rgds
>>>> 
>>>> Damon
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> EMAIL ADDRESS HIDDEN
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> EMAIL ADDRESS HIDDEN
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>> 
>>> 
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> EMAIL ADDRESS HIDDEN
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> EMAIL ADDRESS HIDDEN
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>> 
>> 
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> 
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>