[OpenTRV-dev] V0p2 board here?

[Deniz Erbilgin]

As far as I know the repo you've linked is currently just a place 
holder. We're currently developing on is this one:

https://github.com/DamonHD/OpenTRV

The latest firmware is under ./Arduino/V0p2_Main

You should also make sure you have the latest version of OTRadioLink 
from https://github.com/opentrv/OTRadioLink because we've done a lot of 
refactoring recently.

Regards,

Deniz


On 06/11/15 14:12, Jeremy Poulter wrote:
> I have a first version of this at 
> http://jeremy.bigjungle.net/opentrv/package_opentrv_index.json I think 
> it is ok but I am having troubles testing;
>
> a) I can compile Blink and other examples but I am reluctant to upload 
> because of;
> b) I can not compile the V0p2 firmware (with any board, Uno etc) it 
> just pauses after the first file with no errors
>
> The code is the latest version (as of a few hours ago) from 
> https://github.com/opentrv/opentrv.git.
>
> Can anyone either tell me what is wrong with my setup re: building the 
> firmware or give the above like a go and let me know if it works?
>
> Jeremy
>
> FYI the build log is;
>
>
> Build options changed, rebuilding all
> Using library OTProtocolCC in folder: 
> C:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC (legacy)
> Using library SPI in folder: 
> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI 
>
> Using library Wire in folder: 
> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire 
>
> Using library OTRadioLink in folder: 
> C:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink (legacy)
>
> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5/bin/avr-g++ 
> -c -g -Os -Wall -Wextra -fno-exceptions -ffunction-sections 
> -fdata-sections -fno-threadsafe-statics -MMD -mmcu=atmega328p 
> -DF_CPU=1000000L -DARDUINO=10604 -DARDUINO_AVR_V0P2 -DARDUINO_ARCH_AVR 
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\cores\arduino 
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\variants\standard 
> -IC:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC 
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI 
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire 
> -IC:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink 
> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp 
> -o 
> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp.o 
>
>
>
> On 5 November 2015 at 11:13, Jeremy Poulter <jeremy at bigjungle.net 
> <mailto:jeremy at bigjungle.net>> wrote:
>
>     Thanks, I think that is sufficient but will drop an email if I
>     need more info.
>
>     Jeremy
>
>     On 5 November 2015 at 11:03, Damon Hart-Davis <dhd at exnet.com
>     <mailto:dhd at exnet.com>> wrote:
>
>         Hi,
>
>         1) Thanks!
>
>         2) REV2 is one of the revisions/variants of our V0p2 design
>         (ATmega328P based).
>
>         3) Here’s the main setup page, but tell me if you need more:
>         https://sourceforge.net/p/opentrv/wiki/Arduino/
>
>         Rgds
>
>         Damon
>
>
>         > On 5 Nov 2015, at 10:57, Jeremy Poulter
>         <jeremy at bigjungle.net <mailto:jeremy at bigjungle.net>> wrote:
>         >
>         > I can give it a go. Need to get setup so I can update the
>         firmware on my Rev 2 board anyway (is that the same as V0p2?).
>         Can you point me at the docs for the IDE setup?
>         >
>         > Jeremy
>         >
>         > On 5 November 2015 at 10:14, Damon Hart-Davis <dhd at exnet.com
>         <mailto:dhd at exnet.com>> wrote:
>         > OK, thanks!
>         >
>         > Separate question then: anyone volunteering to formulate the
>         file?
>         >
>         > I will find somewhere suitable to locate it, eg GitHub or
>         earth.org.uk <http://earth.org.uk>.
>         >
>         > Rgds
>         >
>         > Damon
>         >
>         > > On 5 Nov 2015, at 09:25, Damon Hart-Davis <dhd at exnet.com
>         <mailto:dhd at exnet.com>> wrote:
>         > >
>         > > Should the V0p2 board description be going here to make
>         life easier, somehow, or do I have the wrong end of the stick
>         as usual?
>         > >
>         > >
>         https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls
>         > >
>         > > Rgds
>         > >
>         > > Damon
>         >
>         > _______________________________________________
>         > OpenTRV-dev mailing list
>         > OpenTRV-dev at lists.opentrv.org.uk
>         <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>         > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>         >
>         > _______________________________________________
>         > OpenTRV-dev mailing list
>         > OpenTRV-dev at lists.opentrv.org.uk
>         <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>         > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>         _______________________________________________
>         OpenTRV-dev mailing list
>         OpenTRV-dev at lists.opentrv.org.uk
>         <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>         http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151106/cd78cdf2/attachment-0001.html>