[OpenTRV-dev] V0p2 board here?

Fri Nov 6 18:22:02 GMT 2015

Not particularly fussed about getting the latest so if you could recommend
a tag/branch that is stable I would be grateful.

Jeremy
On 6 Nov 2015 18:08, "Damon Hart-Davis" <dhd at exnet.com> wrote:

> Hi,
>
> Be cautious actually getting code from the mainline for anything serious
> without asking me first as it gets yanked around for various different
> purposes!  It should always be *near* production quality, but not
> necessarily quite at it.
>
> In general, ask me directly or on the dev list if you are thinking of
> using the HEAD and either matching tags can be put in all the libraries or
> we can point you to a recent set known to play nicely together.
>
> We are due another release of everything soonish, V0.10.
>
> Rgds
>
> Damon
>
>
> > On 6 Nov 2015, at 18:01, Deniz Erbilgin <deniz.erbilgin at gmail.com>
> wrote:
> >
> > I'm using 1.6.5. Don't know if switching to it would change anything
> though. It may be worth it just too see if it's a problem with your
> installation.
> >
> > Also, we've just fixed the mainline (apparently it was broken around
> lunchtime) so you should get the latest version.
> >
> > Regards,
> >
> > Deniz
> >
> > On 06/11/15 16:57, Jeremy Poulter wrote:
> >> Arduino 1.6.4 from arduino.cc
> >>
> >> Jeremy
> >>
> >> On 6 November 2015 at 16:05, Deniz Erbilgin <deniz.erbilgin at gmail.com>
> wrote:
> >> What version of the arduino IDE are you using (and is it from .cc or
> .org)?
> >>
> >> Regards,
> >>
> >> Deniz
> >>
> >>
> >> On 06/11/15 15:21, Jeremy Poulter wrote:
> >>> Ah sorry, it was that one I was using, it was the two libraries
> OTRadioLink and OTProtocolCC that where from the OpenTRV github.
> >>>
> >>> Jeremy
> >>>
> >>> On 6 November 2015 at 14:40, Deniz Erbilgin <deniz.erbilgin at gmail.com>
> wrote:
> >>> As far as I know the repo you've linked is currently just a place
> holder. We're currently developing on is this one:
> >>>
> >>> https://github.com/DamonHD/OpenTRV
> >>>
> >>> The latest firmware is under ./Arduino/V0p2_Main
> >>>
> >>> You should also make sure you have the latest version of OTRadioLink
> from https://github.com/opentrv/OTRadioLink because we've done a lot of
> refactoring recently.
> >>>
> >>> Regards,
> >>>
> >>> Deniz
> >>>
> >>>
> >>>
> >>> On 06/11/15 14:12, Jeremy Poulter wrote:
> >>>> I have a first version of this at
> http://jeremy.bigjungle.net/opentrv/package_opentrv_index.json I think it
> is ok but I am having troubles testing;
> >>>>
> >>>> a) I can compile Blink and other examples but I am reluctant to
> upload because of;
> >>>> b) I can not compile the V0p2 firmware (with any board, Uno etc) it
> just pauses after the first file with no errors
> >>>>
> >>>> The code is the latest version (as of a few hours ago) from
> https://github.com/opentrv/opentrv.git.
> >>>>
> >>>> Can anyone either tell me what is wrong with my setup re: building
> the firmware or give the above like a go and let me know if it works?
> >>>>
> >>>> Jeremy
> >>>>
> >>>> FYI the build log is;
> >>>>
> >>>>
> >>>> Build options changed, rebuilding all
> >>>> Using library OTProtocolCC in folder:
> C:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC (legacy)
> >>>> Using library SPI in folder:
> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
> >>>> Using library Wire in folder:
> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
> >>>> Using library OTRadioLink in folder:
> C:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink (legacy)
> >>>>
> >>>>
> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5/bin/avr-g++
> -c -g -Os -Wall -Wextra -fno-exceptions -ffunction-sections -fdata-sections
> -fno-threadsafe-statics -MMD -mmcu=atmega328p -DF_CPU=1000000L
> -DARDUINO=10604 -DARDUINO_AVR_V0P2 -DARDUINO_ARCH_AVR
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\cores\arduino
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\variants\standard
> -IC:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
> -IC:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink
> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp
> -o
> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp.o
> >>>>
> >>>>
> >>>> On 5 November 2015 at 11:13, Jeremy Poulter <jeremy at bigjungle.net>
> wrote:
> >>>> Thanks, I think that is sufficient but will drop an email if I need
> more info.
> >>>>
> >>>> Jeremy
> >>>>
> >>>> On 5 November 2015 at 11:03, Damon Hart-Davis <dhd at exnet.com> wrote:
> >>>> Hi,
> >>>>
> >>>> 1) Thanks!
> >>>>
> >>>> 2) REV2 is one of the revisions/variants of our V0p2 design
> (ATmega328P based).
> >>>>
> >>>> 3) Here’s the main setup page, but tell me if you need more:
> https://sourceforge.net/p/opentrv/wiki/Arduino/
> >>>>
> >>>> Rgds
> >>>>
> >>>> Damon
> >>>>
> >>>>
> >>>> > On 5 Nov 2015, at 10:57, Jeremy Poulter <jeremy at bigjungle.net>
> wrote:
> >>>> >
> >>>> > I can give it a go. Need to get setup so I can update the firmware
> on my Rev 2 board anyway (is that the same as V0p2?). Can you point me at
> the docs for the IDE setup?
> >>>> >
> >>>> > Jeremy
> >>>> >
> >>>> > On 5 November 2015 at 10:14, Damon Hart-Davis <dhd at exnet.com>
> wrote:
> >>>> > OK, thanks!
> >>>> >
> >>>> > Separate question then: anyone volunteering to formulate the file?
> >>>> >
> >>>> > I will find somewhere suitable to locate it, eg GitHub or
> earth.org.uk.
> >>>> >
> >>>> > Rgds
> >>>> >
> >>>> > Damon
> >>>> >
> >>>> > > On 5 Nov 2015, at 09:25, Damon Hart-Davis <dhd at exnet.com> wrote:
> >>>> > >
> >>>> > > Should the V0p2 board description be going here to make life
> easier, somehow, or do I have the wrong end of the stick as usual?
> >>>> > >
> >>>> > >
> https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls
> >>>> > >
> >>>> > > Rgds
> >>>> > >
> >>>> > > Damon
> >>>> >
> >>>> > _______________________________________________
> >>>> > OpenTRV-dev mailing list
> >>>> > OpenTRV-dev at lists.opentrv.org.uk
> >>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >>>> >
> >>>> > _______________________________________________
> >>>> > OpenTRV-dev mailing list
> >>>> > OpenTRV-dev at lists.opentrv.org.uk
> >>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >>>>
> >>>> _______________________________________________
> >>>> OpenTRV-dev mailing list
> >>>> OpenTRV-dev at lists.opentrv.org.uk
> >>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> OpenTRV-dev mailing list
> >>>>
> >>>> OpenTRV-dev at lists.opentrv.org.uk
> >>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >>>
> >>>
> >>> _______________________________________________
> >>> OpenTRV-dev mailing list
> >>> OpenTRV-dev at lists.opentrv.org.uk
> >>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> OpenTRV-dev mailing list
> >>>
> >>> OpenTRV-dev at lists.opentrv.org.uk
> >>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >>
> >>
> >> _______________________________________________
> >> OpenTRV-dev mailing list
> >> OpenTRV-dev at lists.opentrv.org.uk
> >> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> OpenTRV-dev mailing list
> >>
> >> OpenTRV-dev at lists.opentrv.org.uk
> >> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> > _______________________________________________
> > OpenTRV-dev mailing list
> > OpenTRV-dev at lists.opentrv.org.uk
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151106/bad4d120/attachment-0001.html>