<div dir="ltr">i have gathered the spare opentrv module and found an extra ftdi cable so should be good to go,<div><br></div><div>will try and do this in the weekend and take notes so i can replicate it once i have reformatted the harddrive attached to the pi</div><div><br></div><div>asked damon how to setup the opentrv so it's a "listen only" board.... he is sure busy as hell so might not be before tomorrow i get an reply</div></div><div class="gmail_extra"><br><div class="gmail_quote">2015-05-07 20:10 GMT+02:00 Aideen McConville <span dir="ltr"><<a href="mailto:aideen@amcc.myzen.co.uk" target="_blank">aideen@amcc.myzen.co.uk</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto"><div>and...</div><div><br></div><div>It shouldn't be necessary to run node-red as super user.</div><div><br></div><div>To get access to serial devices, add your logged in user to the dialout group,</div><div><br></div><div>$ sudo adduser your-user-id dialout</div><div><br></div><div>then logout and login again.<br><br><div>Aideen</div><div><br></div></div><div><br>On 7 May 2015, at 19:03, Aideen McConville <<a href="mailto:aideen@amcc.myzen.co.uk" target="_blank">aideen@amcc.myzen.co.uk</a>> wrote:<br><br></div><blockquote type="cite"><div><div>PS I would use the definitive installation instructions from:</div><div><br></div><div><span style="font-size:15px;line-height:19px;white-space:nowrap"><a href="http://nodered.org/docs/hardware/raspberrypi.html" target="_blank">http://nodered.org/docs/hardware/raspberrypi.html</a></span><br><br><div>Aideen</div><div><br></div></div><div><br>On 7 May 2015, at 16:47, "Aideen McConville" <<a href="mailto:aideen@amcc.myzen.co.uk" target="_blank">aideen@amcc.myzen.co.uk</a>> wrote:<br><br></div><blockquote type="cite"><div><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Yes, that looks like a great starting point.<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">You'll need to do a bit of parsing within Node-Red processing blocks. The switch node (block) is good for a bit of easy pre-processing.<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Dom Brambley's posts will be helpful too:<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="https://www.ibm.com/developerworks/community/blogs/B-Fool/?lang=en" target="_blank">https://www.ibm.com/developerworks/community/blogs/B-Fool/?lang=en</a><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0cm 0cm 0cm"><p class="MsoNormal"><b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> <a href="mailto:opentrv-dev-bounces@lists.opentrv.org.uk" target="_blank">opentrv-dev-bounces@lists.opentrv.org.uk</a> [<a href="mailto:opentrv-dev-bounces@lists.opentrv.org.uk" target="_blank">mailto:opentrv-dev-bounces@lists.opentrv.org.uk</a>] <b>On Behalf Of </b>Bo Herrmannsen<br><b>Sent:</b> 07 May 2015 16:36<br><b>To:</b> Closed list for developer discussions<br><b>Subject:</b> Re: [OpenTRV-dev] opentrv to emoncms<u></u><u></u></span></p></div><p class="MsoNormal"><u></u> <u></u></p><div><p class="MsoNormal">unless i'm mistaken this link has a recipe i could use:<u></u><u></u></p><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">the current cost part: <a href="https://jonathanleach1.wordpress.com/2014/02/16/node-red/" target="_blank">https://jonathanleach1.wordpress.com/2014/02/16/node-red/</a><u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">it says that node-red has a direct serial input block...<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">my thought now is to take one string in... look for house code for say kitchen, and if that code is there....<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">then i'm a bit lost yet on how to split up the entire string so that i can send off the data to emoncms<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">might get it when i have looked a bit more at it....<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p><div><div><p class="MsoNormal">2015-05-07 16:56 GMT+02:00 Aideen McConville <<a href="mailto:aideen@amcc.myzen.co.uk" target="_blank">aideen@amcc.myzen.co.uk</a>>:<u></u><u></u></p><div><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Sending data to emonCMS looks like:</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="http://host/emoncms/input/post.json?json=%7Bcc-watts:200,cc-temp:22.5%7D&apikey=" target="_blank">http://host/emoncms/input/post.json?json={cc-watts:200,cc-temp:22.5}&apikey=</a>…..</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">or (since emonCMS version 8.4.?)</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="http://host/emoncms/input/post.json?node=1&json=%7Bcc-watts:200,cc-temp:22.5%7D&apikey=" target="_blank">http://host/emoncms/input/post.json?node=1&json={cc-watts:200,cc-temp:22.5}&apikey=</a>…..</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Currently, with the Conrad units, there's only an idea of house codes, rather than individual node codes (I think). You could improvise by setting different frost values to differentiate different units</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Ideally, use MQTT early in the mix with a tree structure like</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">house/opentrv/study/temp</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">house/opentrv/study/light</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">house/opentrv/bedroom1/temp</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">house/emonTx/watts</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">house/emonTx/pipetemp</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">etc</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Node-Red makes it easy to connect these things with minimal coding. It is well versed in the ways of MQTT, JSON and even emonCMS so lots of examples out there (but still with a degree of flux between versions).</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Having several Pi's is power for the course :-)</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0cm 0cm 0cm"><p class="MsoNormal"><b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> <a href="mailto:opentrv-dev-bounces@lists.opentrv.org.uk" target="_blank">opentrv-dev-bounces@lists.opentrv.org.uk</a> [mailto:<a href="mailto:opentrv-dev-bounces@lists.opentrv.org.uk" target="_blank">opentrv-dev-bounces@lists.opentrv.org.uk</a>] <b>On Behalf Of </b>Bo Herrmannsen<br><b>Sent:</b> 07 May 2015 15:29<br><b>To:</b> Closed list for developer discussions<br><b>Subject:</b> Re: [OpenTRV-dev] opentrv to emoncms</span><u></u><u></u></p></div><p class="MsoNormal"> <u></u><u></u></p><div><p class="MsoNormal">hmm<u></u><u></u></p><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">my idea so far...:<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">i have one spare usb port left... use that with and ftdi and extend the serial plug so i could wall mount an OpenTRV and use that one to collect the data from all the others.<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">could the perl example be used to forward the data so they show up in emoncms as individual nodes? or how does it work?<u></u><u></u></p></div></div><div><p class="MsoNormal"> <u></u><u></u></p><div><p class="MsoNormal">2015-05-07 16:07 GMT+02:00 Aideen McConville <<a href="mailto:aideen@amcc.myzen.co.uk" target="_blank">aideen@amcc.myzen.co.uk</a>>:<u></u><u></u></p><div><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Hi Bo,</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I too am interested in collecting data from OpenTRV, OpenEnergyMonitor (oem) and other sensors and wrangling it as required (e.g. sending to emonCMS and other possible stores/dashboards).</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Rather than modify (and complexify!) the code in individual sensor nodes, I am planning to use a central node to receive, store and forward data (e.g. using MQTT and Node-Red). It's fairly easy to send data from any sensor to emonCMS using oem's input API and the same techniques can be useful for the oem sensors themselves (emonTx and emonTH). I can provide a simple Perl example on request (sends Currentcost energy meter serial data to emonCMS).</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">One OpenTRV unit could act as an interim (RFMxx) gateway - listening for data from other "busier" units and forwarding it to the main gateway (e.g. via a FTDI - USB link to a mini wireless router or Raspberry Pi).</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I currently have one OpenTRV Rev2 board (r4111) talking to a Conrad valve drive. It is connected to, and powered by, the USB port of a micro TP-Link router via FTDI (same USB BUB as used to talk to Jeenodes and oem units). The TP-Link router is running OpenWRT (embedded Linux) and has some USB tools and the Mosquitto client software installed (further details on request). A Raspberry Pi would work just as well.</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">To "see" the serial data from the OpenTRV board, I just need to logon to the router and type:</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"># stty -F /dev/ttyUSB0 4800 raw -echo</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"># cat < /dev/ttyUSB0</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">A further step: to remove the "><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank">" lines from the output and pass the rest on to a Mosquitto broker (running elsewhere on the network):</a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank"> </a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank"># awk 'NF > 1' /dev/ttyUSB0 | mosquitto_pub -l -h 192.168.1.112 -t 'house/opentrv/lab'</a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank"> </a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank">I can then see the data on a beefier linux box (one with a hard drive!) running the broker:</a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank"> </a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank">$ mosquitto_sub -t 'house/#'</a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank">:</a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank">FHT8V TX</a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""><a href="mailto:%22%20lines%20from%20the%20output%20and%20pass%20the%20rest%20on%20to%20a%20Mosquitto%20broker%20(running%20elsewhere%20on%20the%20network):%0d%C2%A0%0d#+awk+'NF+%3E+1'+/dev/ttyUSB0+%7C+mosquitto_pub+-l+-h+192.168.1.112+-t+'house/opentrv/lab'%0D%C2%A0%0DI+can+then+see+the+data+on+a+beefier+linux+box+(one+with+a+hard+drive!)+running+the+broker:%0D%C2%A0%0D$+mosquitto_sub+-t+'house/%23'%0D:%0DFHT8V+TX%0D=F0" target="_blank">=F0%@20C4;T6 1 W255 0 F255 0 W255 0 F255 0;S12 12 21;HC18 11;{"@":"120b","L":235,"B|mV":3332,"occ|%":0,"vC|%":0}</a></span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">FHT8V TX</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">FHT8V TX</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">=F0%@20C5;T6 5 W255 0 F255 0 W255 0 F255 0;S12 12 21;HC18 11;{"@":"120b","L":234,"B|mV":3332,"occ|%":0,"vC|%":0}</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">FHT8V TX</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">=F0%@20C5;T6 9 W255 0 F255 0 W255 0 F255 0;S12 12 21;HC18 11;{"@":"120b","L":234,"B|mV":3332,"occ|%":0,"vC|%":0}</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">FHT8V TX</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">FHT8V TX</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">:</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Not sure if this helps with your quest, but if any particlar details are of interest, let me know.</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Aideen</span><u></u><u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><u></u><u></u></p><div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0cm 0cm 0cm"><p class="MsoNormal"><b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> <a href="mailto:opentrv-dev-bounces@lists.opentrv.org.uk" target="_blank">opentrv-dev-bounces@lists.opentrv.org.uk</a> [mailto:<a href="mailto:opentrv-dev-bounces@lists.opentrv.org.uk" target="_blank">opentrv-dev-bounces@lists.opentrv.org.uk</a>] <b>On Behalf Of </b>Bo Herrmannsen<br><b>Sent:</b> 05 May 2015 12:11<br><b>To:</b> Closed list for developer discussions<br><b>Subject:</b> [OpenTRV-dev] opentrv to emoncms</span><u></u><u></u></p></div><p class="MsoNormal"> <u></u><u></u></p><div><p class="MsoNormal">hi again<u></u><u></u></p><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">i'm going to fiddle with my bed-roller server box and i wanted to add data from the OpenTRV units<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">2 ways i can think of it<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">1) Each Opentrv board sends the data to emoncms... they at least work on the same freq, but they dont use the same module,... latest rfm lib that emontx boards use are updated to be able to use rfm69 but i think their boards are still shipped with rfm12 or was it  22.... <u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">anyways my idea was to send commands to the valve, then to emoncms... then sleep for the 2 mins or so<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">2) have one emontx board grap the data it needs from one Opentrv board that again wireless gets data from the others.... i have 2 emontx boards and one opentrv at my hot water cylinder...<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">one of the emontx boards allready gets data from the heatmeter via an IR optical serial port<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">the other one only monitors my water meter so most of the time it will just sit there idle and just report 0 water usage to the emoncms system... i think this one will be mostly suited <u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">right now that board only sends over 2 numbers<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">1) liters an hour<u></u><u></u></p></div><div><p class="MsoNormal">2) clicks since last reading (liters)<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">it reports to emoncms every 4 sec<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">so for each opentrv i just need to collect and add:<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">1)battery voltage<u></u><u></u></p></div><div><p class="MsoNormal">2)temp<u></u><u></u></p></div><div><p class="MsoNormal">3)light level<u></u><u></u></p></div><div><p class="MsoNormal">4)valve open %<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">i have attached 2 files... one for each of the emontx boards<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">the small file is the one for the water meter and the other is for the heatmeater, electricity pulse, and hotwater temp...<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">my idea is to add something to the watermeter skecth that can grab serial data and pick what is needed... i just dont have any clue how.. also the serial data from the opentrv must be in the same order or the emontx will start to report false data.... maybe have the opentrv buffer the data and just update the output when new values are there?<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">anyone have idea or could help out?<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">the zip file is the sketch for my opentrv that controls the hot water<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div></div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>_______________________________________________<br>OpenTRV-dev mailing list<br><a href="mailto:OpenTRV-dev@lists.opentrv.org.uk" target="_blank">OpenTRV-dev@lists.opentrv.org.uk</a><br><a href="http://lists.opentrv.org.uk/listinfo/opentrv-dev" target="_blank">http://lists.opentrv.org.uk/listinfo/opentrv-dev</a><u></u><u></u></p></div><p class="MsoNormal"> <u></u><u></u></p></div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>_______________________________________________<br>OpenTRV-dev mailing list<br><a href="mailto:OpenTRV-dev@lists.opentrv.org.uk" target="_blank">OpenTRV-dev@lists.opentrv.org.uk</a><br><a href="http://lists.opentrv.org.uk/listinfo/opentrv-dev" target="_blank">http://lists.opentrv.org.uk/listinfo/opentrv-dev</a><u></u><u></u></p></div><p class="MsoNormal"><u></u> <u></u></p></div></div></div></div></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>OpenTRV-dev mailing list</span><br><span><a href="mailto:OpenTRV-dev@lists.opentrv.org.uk" target="_blank">OpenTRV-dev@lists.opentrv.org.uk</a></span><br><span><a href="http://lists.opentrv.org.uk/listinfo/opentrv-dev" target="_blank">http://lists.opentrv.org.uk/listinfo/opentrv-dev</a></span><br></div></blockquote></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>OpenTRV-dev mailing list</span><br><span><a href="mailto:OpenTRV-dev@lists.opentrv.org.uk" target="_blank">OpenTRV-dev@lists.opentrv.org.uk</a></span><br><span><a href="http://lists.opentrv.org.uk/listinfo/opentrv-dev" target="_blank">http://lists.opentrv.org.uk/listinfo/opentrv-dev</a></span><br></div></blockquote></div><br>_______________________________________________<br>
OpenTRV-dev mailing list<br>
<a href="mailto:OpenTRV-dev@lists.opentrv.org.uk">OpenTRV-dev@lists.opentrv.org.uk</a><br>
<a href="http://lists.opentrv.org.uk/listinfo/opentrv-dev" target="_blank">http://lists.opentrv.org.uk/listinfo/opentrv-dev</a><br>
<br></blockquote></div><br></div>