[OpenTRV-interest] Curious about wireless

[Kyle Gordon]

Hey,

Many thanks for the information. Unfortunately no 868RFXCom yet, but time
will tell.

Plenty of stuff to resume my googling with.

Cheers

Kyle

On 14 September 2015 at 17:44, Alasdair Macdonald <
wewalkforonereason at gmail.com> wrote:

> The protocol is FHT:
>
> http://sourceforge.net/p/opentrv/wiki/FHT%20Protocol/
>
> http://sourceforge.net/p/opentrv/wiki/ELV%20FHT%20System/
>
> I have an RFXcom RFXtrx433 but since this is a 433 MHz device and FHT
> is 868.35 MHz, this device can't interoperate with OpenTRV / FHT. If
> your RFXcom device is 868, you should be able to use it by identifying
> OpenTRV devices as FHT devices.
>
>
> On 14 September 2015 at 17:18, Kyle Gordon <kyle at lodge.glasgownet.com>
> wrote:
> > Hey folks,
> >
> > Apologies if this has been answered elsewhere... I promise I have
> searched!
> >
> > How does the OpenTRV unit communicate with the 'brains' of the system? I
> see
> > mentions of 'wirelessly', but I've been unable to find any reference to
> the
> > technology involved.
> >
> > I have a fairly reasonable home automation system, centered around an
> RFXCom
> > transceiver and Domoticz for the control side of things. Whilst I can
> > control my heating through distributed sensors and dumb toggling of the
> > boiler state, controlling the TRVs around the house is the next logical
> > step.
> >
> > Any information you can send my way would be greatly appreciated!
> _______________________________________________
> OpenTRV-interest mailing list
> OpenTRV-interest at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-interest
>



-- 
Kyle Gordon - 2M1DIQ
Web: http://lodge.glasgownet.com
Jabber/Email/SIP: kyle at lodge.glasgownet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-interest/attachments/20150914/73e01afb/attachment.html>