[OpenTRV-dev] SSR box

[Bruno Girin]

Hi Bo,

OK, I struggle a bit to understand what it should be like because I have no
idea what the SSR look like. Can someone send me a picture and measurements
please?

Cheers,

Bruno



On 8 December 2013 15:38, Bo Herrmannsen <EMAIL ADDRESS HIDDEN> wrote:

> Hi
>
> The box is as it should be.... the big hole is for a rubber grommet that
> you run a mains wire through
>
>
> and then there is a hole for the 5v from the OpenTRV box... and then a
> base with wented hole to prevent heat buildup should there be any
>
>
> the big hole works fine for me.... when its all bolted together it should
> be strong enough...
>
>
> only thing i did not manage to do in time was fudge factor on the center
> hole in the lid which should hold a 3mm LED
>
>
>
>
> Den 08/12/2013 kl. 13.53 skrev Bruno Girin:
>
> > Hi all,
> >
> > I've now included Bo's SSR box with the rest of the box code and added
> the ability to render it flat with lilypads for printing.
> >
> > This box still assumes there's a PCB somewhere and has a big round hole
> that may be difficult to bridge for printers. Therefore if someone could
> send me the details of what the SSR looks like and what connections it
> needs, I will adapt the box to it.
> >
> > Cheers,
> >
> > Bruno
> >
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>



-- 
Bruno
Visit my weblog: http://brunogirin.blogspot.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20131208/4b984143/attachment.html>