[OpenTRV-dev] OT: first draft for reflow controller

[Bo Herrmannsen]

a new rev. attached.... still need to figure what pins on gpio that is sda
and scl

chip for thermocoupler uses /cs and sck and sd.... sure i have mixed up the
therms here


/bo

2013/6/22 Mike Stirling <EMAIL ADDRESS HIDDEN>

>  How are you for clearance between the HV part and the components on the
> Pi?  Particularly the HDMI connector.  I'd seriously consider putting the
> mains stuff on a separate board so that you don't need to worry about
> things in 3 dimensions!
>
> Mike
>
> On 21/06/13 21:37, Bo Herrmannsen wrote:
>
> Hope it is of use
>
>
> _______________________________________________
> OpenTRV-dev mailing EMAIL ADDRESS HIDDEN://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130623/bbd8ce8b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reflowctrl_brd_x1.pdf
Type: application/pdf
Size: 38191 bytes
Desc: not available
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130623/bbd8ce8b/attachment-0003.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reflowctrl_brd_x4.pdf
Type: application/pdf
Size: 45612 bytes
Desc: not available
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130623/bbd8ce8b/attachment-0004.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reflowctrl_sch.pdf
Type: application/pdf
Size: 19280 bytes
Desc: not available
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130623/bbd8ce8b/attachment-0005.pdf>