[OpenTRV-dev] Schematic is good

[Damon Hart-Davis]

Optiboot (512 bytes), 4800 baud (to match what I was doing with the PICAXE so a common CLI front end will work with both).

http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/README.txt

http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/boards.txt

http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/atmega328_1b.hex

http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/BlinkPower.ino

Rgds

Damon


On 17 May 2013, at 12:43, Stuart Poulton wrote:

> Forgot to ask, is that still working with an arduino bootloader, if so at what baud rate ?
> 
> Thanks
> 
> Stuart
> 
> 
> On 17 May 2013, at 12:39, Stuart Poulton wrote:
> 
>> Damon,
>> 
>> Looks good, out of interest (following on from you tweet)
>> 
>> "Good slides! BTW, I have ATmega328P down to 1.3uA@~2.4V (2xNiMH AA cells) running software RTC, EMAIL ADDRESS HIDDEN from int 8MHz RC."
>> 
>> Can we take a peak at the code ?
>> 
>> Stuart
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>