[OpenTRV-dev] Schematic is good

[Stuart Poulton]

Damon,

Many thanks. Very useful.

How are you finding reliability at 4k8 ? Is 9k6 not stable ?

Stuart

On 17 May 2013, at 12:49, Damon Hart-Davis wrote:

> Optiboot (512 bytes), 4800 baud (to match what I was doing with the PICAXE so a common CLI front end will work with both).
> 
> http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/README.txt
> 
> http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/boards.txt
> 
> http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/atmega328_1b.hex
> 
> http://www.earth.org.uk/OpenTRV/Arduino/bootloader/ATmega328P-1MHz/BlinkPower.ino
> 
> Rgds
> 
> Damon
> 
> 
> On 17 May 2013, at 12:43, Stuart Poulton wrote:
> 
>> Forgot to ask, is that still working with an arduino bootloader, if so at what baud rate ?
>> 
>> Thanks
>> 
>> Stuart
>> 
>> 
>> On 17 May 2013, at 12:39, Stuart Poulton wrote:
>> 
>>> Damon,
>>> 
>>> Looks good, out of interest (following on from you tweet)
>>> 
>>> "Good slides! BTW, I have ATmega328P down to 1.3uA@~2.4V (2xNiMH AA cells) running software RTC, EMAIL ADDRESS HIDDEN from int 8MHz RC."
>>> 
>>> Can we take a peak at the code ?
>>> 
>>> Stuart
>> 
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> 
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev