[OpenTRV-dev] its alive....

[Bo Herrmannsen]

of course... the last sketch is what i use now, but the pulse count part
was org meant for counting electricity so i have to adjust so its pure
pulse count and not pulse/time

/bo

2013/5/18 Mike Stirling <EMAIL ADDRESS HIDDEN>

>  Bo,
>
> Once you get the irda interface working, send me a sample of the data you
> get over the serial and I will write you a Python script to submit to
> emoncms.  You will need a Pi to run it on, but that could be the same one
> that's doing your logging.
>
> Mike
>
>
> On 18/05/13 02:27, Bo Herrmannsen wrote:
>
> finally got emon cms working
>
> http://87.51.52.114/emoncms/raspi&id=1
>
> for now just the outdoor temp... after some sleep i will add my hotwater
> cylinder
>
> and then the water meter and later heat meter
>
>
>
> if anyone knows i have this Q....
>
> my heat meter have about 6 values i can read out of it via a irda port...
> i have an arduino sketch for it so i dont think it will be any problem...
> thou this sketch just delivers to serial port... one line with each picked
> value... so if i cant not figure it who can help out with a sketch that can
> send those values?
>
> and next q is if emon cms can subtract to values and store that? or is
> that better done on board?
>
> /bo
>
>
> _______________________________________________
> OpenTRV-dev mailing EMAIL ADDRESS HIDDEN://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130519/761c48ac/attachment.html>