[OpenTRV-dev] London Cleanweb meetup on Monday

[Bo Herrmannsen]

my hacker space should have both their printers back this comming week so i 
could help out mass printing... one doing one half the box and the other the 
other half... several copies at same time of course

i just need an STL i can drop in makerware, that is what they use and it 
makes it as easy as inserting an SD card once there and press start


/bo

-----Oprindelig meddelelse----- 
From: Damon Hart-Davis
Sent: Sunday, October 20, 2013 7:06 PM
To: Closed list for developer discussions
Subject: Re: [OpenTRV-dev] London Cleanweb meetup on Monday

Hi,

I'm going to run a batch of boards through Bo and another through a 
professional board- making and stuffing company who will also source most of 
the components thus minimising my effort.

Bo should hang on of what he builds to enough to fully wire his flat for 
OpenTRV and return the rest for my testing and development.

The other batch should go to our first trial participants.

We'll need the boxes sorted too, though may farm out the printing of all but 
the first few to a professional company, again to minimise time on manual 
and admin tasks for me.

Rgds

Damon


On 20 Oct 2013, at 16:52, Bo Herrmannsen wrote:

> I would if i was able....
>
> hmm.... could we add some facetime/google hangout on top of the actual 
> meeting?
>
> as for those that dont know i'm almost ready for batch mass assembly: oven 
> adjusted and runs ok, manual pick&place also working.... only bit missing 
> is the solder paste dispenser that is currently in the hands of danish 
> customs "service"... should be released monday or day after
>
> /bo
>
> -----Oprindelig meddelelse----- From: Damon Hart-Davis
> Sent: Sunday, October 20, 2013 5:14 PM
> To: Closed list for developer discussions
> Subject: [OpenTRV-dev] London Cleanweb meetup on Monday
>
> http://www.meetup.com/Cleanweb-London
>
> Does anyone (in London) fancy meeting there to discuss various things such 
> as the DD Hackathon and getting the first run of 30 boards made (and boxes 
> too)?
>
> I'm in two minds because I'd rather be assured of having the time get the 
> PCB finished and off to PMS on Monday and I still have quite a lot of 
> catching up to do since before the Hackathon!
>
> Rgds
>
> Damon
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>

_______________________________________________
OpenTRV-dev mailing list
EMAIL ADDRESS HIDDEN
http://lists.opentrv.org.uk/listinfo/opentrv-dev