[OpenTRV-dev] London Cleanweb meetup on Monday

[Damon Hart-Davis]

Bo,

If I can steal some more of Bruno's time to finish the OpenTRV REV1 box in all its glory, then we can all print that box design.

Current plan would be to have the lid in natural/transparent (just being playing with that type of PLA today) so that LDR and LED don't need any penetrations, and rest of box the same or opaque white.

Rgds

Damon


On 20 Oct 2013, at 18:11, Bo Herrmannsen wrote:

> my hacker space should have both their printers back this comming week so i could help out mass printing... one doing one half the box and the other the other half... several copies at same time of course
> 
> i just need an STL i can drop in makerware, that is what they use and it makes it as easy as inserting an SD card once there and press start
> 
> 
> /bo
> 
> -----Oprindelig meddelelse----- From: Damon Hart-Davis
> Sent: Sunday, October 20, 2013 7:06 PM
> To: Closed list for developer discussions
> Subject: Re: [OpenTRV-dev] London Cleanweb meetup on Monday
> 
> Hi,
> 
> I'm going to run a batch of boards through Bo and another through a professional board- making and stuffing company who will also source most of the components thus minimising my effort.
> 
> Bo should hang on of what he builds to enough to fully wire his flat for OpenTRV and return the rest for my testing and development.
> 
> The other batch should go to our first trial participants.
> 
> We'll need the boxes sorted too, though may farm out the printing of all but the first few to a professional company, again to minimise time on manual and admin tasks for me.
> 
> Rgds
> 
> Damon
> 
> 
> On 20 Oct 2013, at 16:52, Bo Herrmannsen wrote:
> 
>> I would if i was able....
>> 
>> hmm.... could we add some facetime/google hangout on top of the actual meeting?
>> 
>> as for those that dont know i'm almost ready for batch mass assembly: oven adjusted and runs ok, manual pick&place also working.... only bit missing is the solder paste dispenser that is currently in the hands of danish customs "service"... should be released monday or day after
>> 
>> /bo
>> 
>> -----Oprindelig meddelelse----- From: Damon Hart-Davis
>> Sent: Sunday, October 20, 2013 5:14 PM
>> To: Closed list for developer discussions
>> Subject: [OpenTRV-dev] London Cleanweb meetup on Monday
>> 
>> http://www.meetup.com/Cleanweb-London
>> 
>> Does anyone (in London) fancy meeting there to discuss various things such as the DD Hackathon and getting the first run of 30 boards made (and boxes too)?
>> 
>> I'm in two minds because I'd rather be assured of having the time get the PCB finished and off to PMS on Monday and I still have quite a lot of catching up to do since before the Hackathon!
>> 
>> Rgds
>> 
>> Damon
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> 
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>