[OpenTRV-dev] London Cleanweb meetup on Monday

[Damon Hart-Davis]

Hi,

We are using Conrad FHT8V wireless TRV heads at the moment (I can point you at their catalogue page if you wish).

Depending on numbers I'm happy to supply you with a couple of complete OpenTRV+FHT8V units, one of which can control the boiler (please confirm if you have a 2-wire 240V thermostat connection).

Rgds

Damon


On 20 Oct 2013, at 19:38, Adrian Godwin wrote:

> Whatever works best. I'm happy to populate but buying the components myself is probably silly unless they're all very common. Despite lurking here for a couple of weeks I'm not too sure which is the appropriate design so haven't checked the BOM. I realise that kitting is just as much work as building, though, so I don't want to give Bo the hassle of kitting a couple for me to assemble.
> 
> And what motors are you using ? I've already got mechanical TRVs - can I just get the control head ? 
> 
> 
> 
> 
> On Sun, Oct 20, 2013 at 6:35 PM, Damon Hart-Davis <EMAIL ADDRESS HIDDEN> wrote:
> Well, I could ask Bo to do a run of 20 populated boards rather than 10 (of which he and I will each use about 5 I think).
> 
> (The commercial run is 30 allocated largely to the two people who will be running the uni trial to test for themselves, then a few others already spoken for: I'll try and get an early allocation list formalised.)
> 
> If you feel particularly brave then you could just have bare boards and populate them yourself with components you have ordered using our BOM, at the other extreme.  Say what suits.
> 
> Rgds
> 
> Damon
> 
> 
> On 20 Oct 2013, at 18:26, Adrian Godwin wrote:
> 
> > I'd like to get a couple of TRVs going for development and messing around. What's the best way to get started ? Join in this batch build ?
> >
> >
> > On Sun, Oct 20, 2013 at 6:18 PM, Bo Herrmannsen <EMAIL ADDRESS HIDDEN> wrote:
> > currently i am doing some remote update of the pizza deliverys shop pc... it was  way behind in updates etc
> >
> >
> > as soon that is done i will look at board... but i remember that it was complete.. could not find anything wrong
> >
> >
> > thou the screw terminal for power is not on BOM... should be the same as the one for boiler/SSR but with 3 screws.... just need to tripple check that it relly is the same pitch etc...
> >
> >
> >
> > /bo
> >
> > -----Oprindelig meddelelse----- From: Damon Hart-Davis
> > Sent: Sunday, October 20, 2013 7:14 PM
> > To: Closed list for developer discussions
> > Subject: Re: [OpenTRV-dev] London Cleanweb meetup on Monday
> >
> >
> > It isn't a hard deadline but if I don't get it done and dusted with Bo tomorrow by about 5pm, with one set of board fab (for Bo) off to China by then, then I just won't get time through the week and we'll slip another.
> >
> > Would like to get the boxes semi-finalised while the PCBs are fabbed and stuffed, and then tuned as soon as we have some in hand.
> >
> > I still have some very basic code (the RX side for AVR, cloned from but more capable than the PICAXE version, with some more of Mike's stuff folded in) to write in this interval too.
> >
> > Rgds
> >
> > Damon
> >
> >
> > On 20 Oct 2013, at 17:50, Bruno Girin wrote:
> >
> > I'll probably go to Cleanweb tomorrow. What's your deadline for the boards and boxes?
> >
> > Bruno
> >
> >
> >
> > On 20 October 2013 16:52, Bo Herrmannsen <EMAIL ADDRESS HIDDEN> wrote:
> > I would if i was able....
> >
> > hmm.... could we add some facetime/google hangout on top of the actual meeting?
> >
> > as for those that dont know i'm almost ready for batch mass assembly: oven adjusted and runs ok, manual pick&place also working.... only bit missing is the solder paste dispenser that is currently in the hands of danish customs "service"... should be released monday or day after
> >
> > /bo
> >
> > -----Oprindelig meddelelse----- From: Damon Hart-Davis
> > Sent: Sunday, October 20, 2013 5:14 PM
> > To: Closed list for developer discussions
> > Subject: [OpenTRV-dev] London Cleanweb meetup on Monday
> >
> >
> > http://www.meetup.com/Cleanweb-London
> >
> > Does anyone (in London) fancy meeting there to discuss various things such as the DD Hackathon and getting the first run of 30 boards made (and boxes too)?
> >
> > I'm in two minds because I'd rather be assured of having the time get the PCB finished and off to PMS on Monday and I still have quite a lot of catching up to do since before the Hackathon!
> >
> > Rgds
> >
> > Damon
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> >
> >
> > --
> > Bruno
> > Visit my weblog: http://brunogirin.blogspot.com
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> > _______________________________________________
> > OpenTRV-dev mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
> 
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev