[OpenTRV-dev] I wonder if we can borrow an idea from this...

[Bruno Girin]

OK I'll look into it once we've done the first version of the box.


On 23 October 2013 08:59, Bo Herrmannsen <EMAIL ADDRESS HIDDEN> wrote:

>   Some usefull info here:
>
>
> http://www.thingiverse.com/apps/customizer/run?code=ef5232075a2caf3cd0ea14ef2ef6352d
>
> and the template i was talking about:
> http://www.thingiverse.com/thing:44090/#files
>
>
> /bo
>
>  *From:* Bruno Girin <EMAIL ADDRESS HIDDEN>
> *Sent:* Tuesday, October 22, 2013 10:54 PM
> *To:* Closed list for developer discussions<EMAIL ADDRESS HIDDEN>
> *Subject:* Re: [OpenTRV-dev] I wonder if we can borrow an idea from
> this...
>
>  The interlock is a good idea actually. I experimented with interlocking
> shapes on my own printer a few months ago and it works remarkably well. It
> also ensures that you only print small-ish pieces that just assemble
> together a bit like LEGO.
>
> In practice, thinking about it, interlock may be a way to create boxes
> that don't need any screws to put together. I'll have to experiment with
> that.
>
> Regarding the customisation, I'll have to investigate how it works in
> Thingiverse but I'm sure we can do it.
>
>
> On 22 October 2013 20:22, Bo Herrmannsen <EMAIL ADDRESS HIDDEN> wrote:
>
>> me grumpy too,
>>
>> customs service is operated by monkeys with the thumb up their rear end,
>> and all of them have the common problem in that they dont know what the
>> right and left hand do...
>>
>> and they certainly dont know what their own track and trace system tells
>> them
>>
>> basic they say they have gotten my invoice etc and they would handle the
>> solder dispenser today... but track and trace still waits for copy of
>> invoice....
>>
>> next time when outside EU its UPS only.... they cost more, but they are
>> faster and they handle customs while its underway... even if i order
>> something from malaysia or china i can have it in 2 days... they just bill
>> me for customs later
>>
>> F..K danish postal service !!!!!!!!
>>
>>
>> -----Oprindelig meddelelse----- From: Damon Hart-Davis
>> Sent: Tuesday, October 22, 2013 9:16 PM
>>
>> To: Closed list for developer discussions
>> Subject: Re: [OpenTRV-dev] I wonder if we can borrow an idea from this...
>>
>> Hi,
>>
>> Sorry I'm a bit tired and grumpy this evening!
>>
>> In any case a punchout between them would be neat, yes.
>>
>> Rgds
>>
>> Damon
>>
>>
>> On 22 Oct 2013, at 20:11, Bo Herrmannsen wrote:
>>
>> You are right...
>>>
>>> but then somehow we need to have a small punchout hole somewhere between
>>> the box's
>>>
>>> -----Oprindelig meddelelse----- From: Damon Hart-Davis
>>> Sent: Tuesday, October 22, 2013 9:09 PM
>>> To: Closed list for developer discussions
>>> Subject: Re: [OpenTRV-dev] I wonder if we can borrow an idea from this...
>>>
>>> I don't want to make bigger individual piece because they will take
>>> longer for *all* uses and will be more prone to printer failure part way
>>> through.
>>>
>>> Interlocking means that we can have an extra unit when we want it,
>>> customised, but basic printing time is kept down.
>>>
>>> Rgds
>>>
>>> Damon
>>>
>>>
>>>
>>> On 22 Oct 2013, at 20:01, Bo Herrmannsen wrote:
>>>
>>>
>>>> I bet 5£ that bruno can add the space as a parameter in the OpenSCAD
>>>> file faster than adding the interlock idea.... thou its a good find....
>>>>
>>>> /bo
>>>> -----Oprindelig meddelelse----- From: Damon Hart-Davis
>>>> Sent: Tuesday, October 22, 2013 8:48 PM
>>>> To: Closed list for developer discussions
>>>> Subject: [OpenTRV-dev] I wonder if we can borrow an idea from this...
>>>>
>>>> http://www.thingiverse.com/**thing:108824<http://www.thingiverse.com/thing:108824>
>>>>
>>>> to allow an easy extension box for batteries / SSR later?
>>>>
>>>> Rgds
>>>>
>>>> Damon
>>>> ______________________________**_________________
>>>> OpenTRV-dev mailing list
>>>> EMAIL ADDRESS HIDDEN**uk <EMAIL ADDRESS HIDDEN>
>>>> http://lists.opentrv.org.uk/**listinfo/opentrv-dev<http://lists.opentrv.org.uk/listinfo/opentrv-dev>
>>>> ______________________________**_________________
>>>> OpenTRV-dev mailing list
>>>> EMAIL ADDRESS HIDDEN**uk <EMAIL ADDRESS HIDDEN>
>>>> http://lists.opentrv.org.uk/**listinfo/opentrv-dev<http://lists.opentrv.org.uk/listinfo/opentrv-dev>
>>>>
>>>>
>>> ______________________________**_________________
>>> OpenTRV-dev mailing list
>>> EMAIL ADDRESS HIDDEN**uk <EMAIL ADDRESS HIDDEN>
>>> http://lists.opentrv.org.uk/**listinfo/opentrv-dev<http://lists.opentrv.org.uk/listinfo/opentrv-dev>
>>> ______________________________**_________________
>>> OpenTRV-dev mailing list
>>> EMAIL ADDRESS HIDDEN**uk <EMAIL ADDRESS HIDDEN>
>>> http://lists.opentrv.org.uk/**listinfo/opentrv-dev<http://lists.opentrv.org.uk/listinfo/opentrv-dev>
>>>
>>>
>> ______________________________**_________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN**uk <EMAIL ADDRESS HIDDEN>
>> http://lists.opentrv.org.uk/**listinfo/opentrv-dev<http://lists.opentrv.org.uk/listinfo/opentrv-dev>
>> ______________________________**_________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN**uk <EMAIL ADDRESS HIDDEN>
>> http://lists.opentrv.org.uk/**listinfo/opentrv-dev<http://lists.opentrv.org.uk/listinfo/opentrv-dev>
>>
>
>
>
> --
> Bruno
> Visit my weblog: http://brunogirin.blogspot.com
>
> ------------------------------
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>


-- 
Bruno
Visit my weblog: http://brunogirin.blogspot.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20131023/3f61fa78/attachment.html>