[OpenTRV-dev] started on box design....

[Damon Hart-Davis]

Hi

Also we have to allow enough free circulation of air for the temp sensor to work well, while not exposing too much space for fingers to poke into, if possible!  Let's discuss on IRC,

Once again, huge thanks.

I think the 3D printer will be with me on Monday.

And I need to start a planning exercise, study the PCB fab quote, etc.

Rgds

Damon


On 28 Sep 2013, at 07:51, Damon Hart-Davis wrote:

> Hi,
> 
> Marvellous!  Bo, you are a star!
> 
> Unless we use the DS18B20 then 2xAA NiMH rechargeables is the target.  For the boiler node, which should be powered via the USB instead, that space could be used to house the SSR safely instead if we are careful.
> 
> We need to talk about placement of the buttons, entry ports and LDR.
> 
> Rgds
> 
> Damon
> 
> 
> On 27 Sep 2013, at 12:45, Bo Herrmannsen wrote:
> 
>> so i got a box approx right ... no lid yet... its 2 AA’s we aim for right? or should we go for 3 in case that rechargeables are used? if not the last battery can be replaced by a dummy that should not be hard to make
>> 
>> /bo
>> _______________________________________________
>> OpenTRV-dev mailing list
>> EMAIL ADDRESS HIDDEN
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>