[OpenTRV-dev] OpenTRV boards

[Bo Herrmannsen]

oki doke...

on it.... i'm just eager to get room temps looged so i can compare outside
to inside temp and how much heat i suck from the district heating

on top the building *society
<https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA>
i
rent my flat from replaces all windows and external doors with better
onces... the current ones are as good as the fly net in a tent*

2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> Correct, that is the instructions I used on a RPi B.
>
> Jeremy
> On 16 Dec 2015 18:55, "Bo Herrmannsen" <bo.herrmannsen at gmail.com> wrote:
>
>> would this page make do for installing node red?
>> http://nodered.org/docs/hardware/raspberrypi.html
>>
>> in my case a ras pi 1... so about half way down.... not on the jessie
>> image
>>
>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>
>>> One is the input and the other is the output, both go to the same
>>> physical serial port.
>>>
>>> Jeremy
>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <bo.herrmannsen at gmail.com> wrote:
>>>
>>>> looking at the flow picture....
>>>>
>>>> i see 2 opentrv serials.... why is that?
>>>>
>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>
>>>>> Hi,
>>>>>
>>>>> I certainly have the data going from OpenTRV to EmonCMS (see the post OpenTRV,
>>>>> EmonCMS and Node-RED
>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>> and I am working on some more detailed instructions on the setup.
>>>>>
>>>>> With regard to the back channel I do not believe that the EmonCMS
>>>>> architecture has been built to accommodate this. It is only really for data
>>>>> storage/analyses. So I think you need something else for the control side
>>>>> of things.  Have a look at;
>>>>>  -
>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>  -
>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>
>>>>> Jeremy
>>>>>
>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <bo.herrmannsen at gmail.com
>>>>> > wrote:
>>>>>
>>>>>> i think he wants 2 way control so to speak
>>>>>>
>>>>>> and so would i... but i could live with just getting the data in to
>>>>>> emoncms... for which i have all the hardware but lacking the software
>>>>>>
>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>
>>>>>>> I guess the biggest question is what do you want from an integration
>>>>>>> with OEM? Are we talking about just getting data in to EmonCMS? Do you want
>>>>>>> the OpenTRV radio link to directly talk with an EmonBase? Something in
>>>>>>> between?
>>>>>>>
>>>>>>> Jeremy
>>>>>>>
>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>
>>>>>>>> This is also why i argue that we should take the cost of 2 so he
>>>>>>>> can get going
>>>>>>>>
>>>>>>>> OEM is always busy and i doubt that the hackahon bring us what we
>>>>>>>> want...
>>>>>>>>
>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> > What I'm particulary interested in is integration with open
>>>>>>>>> energy monitor. That's why I would like to ask if there's a possibility to
>>>>>>>>> get a hold of a couple of boards to do some testing / development on. Also
>>>>>>>>> any links to ongoing discussion on these integration might be useful.
>>>>>>>>>
>>>>>>>>> On this part, there is discussion in here, and there is an
>>>>>>>>> OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in London.
>>>>>>>>>
>>>>>>>>> This is clearly not the only integration that OpenTRV should be
>>>>>>>>> doing, but it is an important one and it’s frustrating to me that we have
>>>>>>>>> not already gotten further!
>>>>>>>>>
>>>>>>>>> Rgds
>>>>>>>>>
>>>>>>>>> Damon
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/891e2a3f/attachment.html>