[OpenTRV-dev] OpenTRV boards

Bo Herrmannsen bo.herrmannsen at gmail.com
Thu Dec 17 10:10:03 GMT 2015


rebooted the whole pi and the module are working now... just need to do the
setup

2015-12-17 10:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> The TCP Server flow is a sub flow that provides the 'telnet' access
> directly to the serial port, allowing some form of remote control although
> only really intended for debugging. the snapshot you sent it looks like
> this has been loaded ok anyway.
>
> The EmonCMS stuff is an extra step you need to do after the node-RED
> install, see
> http://openenergymonitor.blogspot.co.uk/2015/11/node-red-emoncms-node.html
>
> Jeremy
>
> On 17 December 2015 at 00:10, Bo Herrmannsen <bo.herrmannsen at gmail.com>
> wrote:
>
>> imported the opentrv.json
>>
>> http://imgur.com/uFypiO3
>>
>> it says that emoncms is not recognized/known... but i guess there is a
>> fix for that
>>
>> should the TCP server also be imported... and if so how?
>>
>> 2015-12-17 0:31 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>
>>> All of it should basically be reusable, should just be the serial port
>>> and emoncms server setup that needs changing (and I hope those are not in
>>> the code I shared ;-)
>>>
>>> Feel free to IM me via Hangouts or I can jump or the IRC tomorrow and we
>>> can go through the process together, that should help with my documentation.
>>>
>>> Jeremy
>>>
>>> On 16 December 2015 at 23:05, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>>> wrote:
>>>
>>>> yep there was a | spinning...
>>>>
>>>> but installed now... setting it up to start at boot
>>>>
>>>> tomorrow the fun begins with setting up the flow.... how much of your
>>>> flow can i reuse?
>>>>
>>>> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>
>>>>> Node-RED? I think it was a while but IIRC there was at least a sign of
>>>>> it doing something.
>>>>>
>>>>> Jeremy
>>>>>
>>>>>
>>>>> On 16 December 2015 at 20:39, Bo Herrmannsen <bo.herrmannsen at gmail.com
>>>>> > wrote:
>>>>>
>>>>>> hehe.... a over night install....
>>>>>>
>>>>>> or how long should the install take?
>>>>>>
>>>>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>>>>
>>>>>>> oki doke...
>>>>>>>
>>>>>>> on it.... i'm just eager to get room temps looged so i can compare
>>>>>>> outside to inside temp and how much heat i suck from the district heating
>>>>>>>
>>>>>>> on top the building *society
>>>>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>>>>> rent my flat from replaces all windows and external doors with better
>>>>>>> onces... the current ones are as good as the fly net in a tent*
>>>>>>>
>>>>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>
>>>>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>>>>
>>>>>>>> Jeremy
>>>>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> would this page make do for installing node red?
>>>>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>>>>
>>>>>>>>> in my case a ras pi 1... so about half way down.... not on the
>>>>>>>>> jessie image
>>>>>>>>>
>>>>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>
>>>>>>>>>> One is the input and the other is the output, both go to the same
>>>>>>>>>> physical serial port.
>>>>>>>>>>
>>>>>>>>>> Jeremy
>>>>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> looking at the flow picture....
>>>>>>>>>>>
>>>>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>>>>
>>>>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>
>>>>>>>>>>> :
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS (see
>>>>>>>>>>>> the post OpenTRV, EmonCMS and Node-RED
>>>>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>>>>
>>>>>>>>>>>> With regard to the back channel I do not believe that the
>>>>>>>>>>>> EmonCMS architecture has been built to accommodate this. It is only really
>>>>>>>>>>>> for data storage/analyses. So I think you need something else for the
>>>>>>>>>>>> control side of things.  Have a look at;
>>>>>>>>>>>>  -
>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>>>>  -
>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>>>>
>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>
>>>>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>>>>
>>>>>>>>>>>>> and so would i... but i could live with just getting the data
>>>>>>>>>>>>> in to emoncms... for which i have all the hardware but lacking the software
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I guess the biggest question is what do you want from an
>>>>>>>>>>>>>> integration with OEM? Are we talking about just getting data in to EmonCMS?
>>>>>>>>>>>>>> Do you want the OpenTRV radio link to directly talk with an EmonBase?
>>>>>>>>>>>>>> Something in between?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> This is also why i argue that we should take the cost of 2
>>>>>>>>>>>>>>> so he can get going
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring us
>>>>>>>>>>>>>>> what we want...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> > What I'm particulary interested in is integration with
>>>>>>>>>>>>>>>> open energy monitor. That's why I would like to ask if there's a
>>>>>>>>>>>>>>>> possibility to get a hold of a couple of boards to do some testing /
>>>>>>>>>>>>>>>> development on. Also any links to ongoing discussion on these integration
>>>>>>>>>>>>>>>> might be useful.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On this part, there is discussion in here, and there is an
>>>>>>>>>>>>>>>> OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in London.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> This is clearly not the only integration that OpenTRV
>>>>>>>>>>>>>>>> should be doing, but it is an important one and it’s frustrating to me that
>>>>>>>>>>>>>>>> we have not already gotten further!
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/5ac9e74c/attachment-0001.html>


More information about the OpenTRV-dev mailing list