[OpenTRV-dev] OpenTRV boards

[Bo Herrmannsen]

yaaaa... one unit showed up....

but have no idea which one.... temp is 31.... hmmm

i have a lidt of unit id's so if that is transfered too as i could see the
difference

2015-12-17 11:43 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> In theory ;-) Although I only have one unit so we may need some tweaking
> to handle more than one.
>
> Jeremy
>
> On 17 December 2015 at 10:40, Bo Herrmannsen <bo.herrmannsen at gmail.com>
> wrote:
>
>> thanks for that...
>>
>> they changed the input part recently so maybe the module used the old
>> link....
>>
>> anyway we will see how it works
>>
>> so once i deploy will i start to see data from all the units arround the
>> flat? or do i need to tweak it more?
>>
>> 2015-12-17 11:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>
>>> No, just the base directory;
>>>
>>> [image: Inline images 2]
>>>
>>> Jeremy
>>>
>>> On 17 December 2015 at 10:29, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>>> wrote:
>>>
>>>> i have some scripts that i use to import solar data from a rooftop
>>>> installed panel....
>>>>
>>>> 'http://127.0.0.1/emoncms/input/post?apikey
>>>>
>>>> so i change emoncms.org to match up .... but should i include
>>>> input/post or does the module add that?
>>>>
>>>> 2015-12-17 11:22 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>>
>>>>> i see you both have emonbase and emoncms...
>>>>>
>>>>> since i only store data local i guess i can delete emonbase?
>>>>>
>>>>> 2015-12-17 11:20 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>>>
>>>>>> about the setup
>>>>>>
>>>>>> we use the same usb port config so i guess there is no need to change
>>>>>> that...
>>>>>>
>>>>>> are there other things i need to change?
>>>>>>
>>>>>> 2015-12-17 11:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>
>>>>>>> Yes, you probably need to restart. If you followed the instructions
>>>>>>> on the Node-RED site it should be;
>>>>>>>
>>>>>>>   pm2 restart node-red
>>>>>>>
>>>>>>> Jeremy
>>>>>>>
>>>>>>> On 17 December 2015 at 09:57, Bo Herrmannsen <
>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>
>>>>>>>> that was install.... i guess i have to restart node-red before it
>>>>>>>> is loaded?
>>>>>>>>
>>>>>>>> if so what is the right command here? sudo service ***** restart or
>>>>>>>> something else?
>>>>>>>>
>>>>>>>> 2015-12-17 10:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>
>>>>>>>>> The TCP Server flow is a sub flow that provides the 'telnet'
>>>>>>>>> access directly to the serial port, allowing some form of remote control
>>>>>>>>> although only really intended for debugging. the snapshot you sent it looks
>>>>>>>>> like this has been loaded ok anyway.
>>>>>>>>>
>>>>>>>>> The EmonCMS stuff is an extra step you need to do after the
>>>>>>>>> node-RED install, see
>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/node-red-emoncms-node.html
>>>>>>>>>
>>>>>>>>> Jeremy
>>>>>>>>>
>>>>>>>>> On 17 December 2015 at 00:10, Bo Herrmannsen <
>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> imported the opentrv.json
>>>>>>>>>>
>>>>>>>>>> http://imgur.com/uFypiO3
>>>>>>>>>>
>>>>>>>>>> it says that emoncms is not recognized/known... but i guess there
>>>>>>>>>> is a fix for that
>>>>>>>>>>
>>>>>>>>>> should the TCP server also be imported... and if so how?
>>>>>>>>>>
>>>>>>>>>> 2015-12-17 0:31 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>>
>>>>>>>>>>> All of it should basically be reusable, should just be the
>>>>>>>>>>> serial port and emoncms server setup that needs changing (and I hope those
>>>>>>>>>>> are not in the code I shared ;-)
>>>>>>>>>>>
>>>>>>>>>>> Feel free to IM me via Hangouts or I can jump or the IRC
>>>>>>>>>>> tomorrow and we can go through the process together, that should help with
>>>>>>>>>>> my documentation.
>>>>>>>>>>>
>>>>>>>>>>> Jeremy
>>>>>>>>>>>
>>>>>>>>>>> On 16 December 2015 at 23:05, Bo Herrmannsen <
>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> yep there was a | spinning...
>>>>>>>>>>>>
>>>>>>>>>>>> but installed now... setting it up to start at boot
>>>>>>>>>>>>
>>>>>>>>>>>> tomorrow the fun begins with setting up the flow.... how much
>>>>>>>>>>>> of your flow can i reuse?
>>>>>>>>>>>>
>>>>>>>>>>>> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>
>>>>>>>>>>>> :
>>>>>>>>>>>>
>>>>>>>>>>>>> Node-RED? I think it was a while but IIRC there was at least a
>>>>>>>>>>>>> sign of it doing something.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 16 December 2015 at 20:39, Bo Herrmannsen <
>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> hehe.... a over night install....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> or how long should the install take?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <
>>>>>>>>>>>>>> bo.herrmannsen at gmail.com>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> oki doke...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> on it.... i'm just eager to get room temps looged so i can
>>>>>>>>>>>>>>> compare outside to inside temp and how much heat i suck from the district
>>>>>>>>>>>>>>> heating
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> on top the building *society
>>>>>>>>>>>>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>>>>>>>>>>>>> rent my flat from replaces all windows and external doors with better
>>>>>>>>>>>>>>> onces... the current ones are as good as the fly net in a tent*
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <
>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> would this page make do for installing node red?
>>>>>>>>>>>>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> in my case a ras pi 1... so about half way down.... not on
>>>>>>>>>>>>>>>>> the jessie image
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> One is the input and the other is the output, both go to
>>>>>>>>>>>>>>>>>> the same physical serial port.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <
>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> looking at the flow picture....
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS
>>>>>>>>>>>>>>>>>>>> (see the post OpenTRV, EmonCMS and Node-RED
>>>>>>>>>>>>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>>>>>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> With regard to the back channel I do not believe that
>>>>>>>>>>>>>>>>>>>> the EmonCMS architecture has been built to accommodate this. It is only
>>>>>>>>>>>>>>>>>>>> really for data storage/analyses. So I think you need something else for
>>>>>>>>>>>>>>>>>>>> the control side of things.  Have a look at;
>>>>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> and so would i... but i could live with just getting
>>>>>>>>>>>>>>>>>>>>> the data in to emoncms... for which i have all the hardware but lacking the
>>>>>>>>>>>>>>>>>>>>> software
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I guess the biggest question is what do you want from
>>>>>>>>>>>>>>>>>>>>>> an integration with OEM? Are we talking about just getting data in to
>>>>>>>>>>>>>>>>>>>>>> EmonCMS? Do you want the OpenTRV radio link to directly talk with an
>>>>>>>>>>>>>>>>>>>>>> EmonBase? Something in between?
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> This is also why i argue that we should take the
>>>>>>>>>>>>>>>>>>>>>>> cost of 2 so he can get going
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon
>>>>>>>>>>>>>>>>>>>>>>> bring us what we want...
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <
>>>>>>>>>>>>>>>>>>>>>>> dhd at exnet.com>:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> > What I'm particulary interested in is integration
>>>>>>>>>>>>>>>>>>>>>>>> with open energy monitor. That's why I would like to ask if there's a
>>>>>>>>>>>>>>>>>>>>>>>> possibility to get a hold of a couple of boards to do some testing /
>>>>>>>>>>>>>>>>>>>>>>>> development on. Also any links to ongoing discussion on these integration
>>>>>>>>>>>>>>>>>>>>>>>> might be useful.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On this part, there is discussion in here, and
>>>>>>>>>>>>>>>>>>>>>>>> there is an OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ
>>>>>>>>>>>>>>>>>>>>>>>> in London.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> This is clearly not the only integration that
>>>>>>>>>>>>>>>>>>>>>>>> OpenTRV should be doing, but it is an important one and it’s frustrating to
>>>>>>>>>>>>>>>>>>>>>>>> me that we have not already gotten further!
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/4ac3e4da/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 23723 bytes
Desc: not available
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/4ac3e4da/attachment-0001.png>