[OpenTRV-dev] OpenTRV to EmonCMS, via Node-RED (was OpenTRV boards)

[Bo Herrmannsen]

Skip one hour sleep and bill damon for one hours work ? :-D

2015-12-19 16:39 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> It is probably only an hours worth of work, just need to fit in that hour
> 😊
>
> Jeremy
> On 19 Dec 2015 15:13, "Bo Herrmannsen" <bo.herrmannsen at gmail.com> wrote:
>
>> yeah i guess it takes a little more than just a days time
>>
>>
>>
>> 2015-12-19 16:11 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>
>>> Hi, yes did help, just need time now 😊
>>> On 19 Dec 2015 12:34, "Bo Herrmannsen" <bo.herrmannsen at gmail.com> wrote:
>>>
>>>> @Jeremy did the list from damon give you enough that you can move on?
>>>>
>>>> 2015-12-17 19:43 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>
>>>>> Hi,
>>>>>
>>>>> We have the current Java-based RPi-friendly concentrator that Bruno
>>>>> and I are running.
>>>>>
>>>>> We intend to extend that under launchpad to a more grown-up solution.
>>>>>
>>>>> We are developing over the next few days (and I may be too busy to
>>>>> answer any more stuff on the list until we’re done) a light-weight
>>>>> half-concentrator / relay that you did the board for Bo (REV10).
>>>>>
>>>>> Rgds
>>>>>
>>>>> Damon
>>>>>
>>>>>
>>>>> > On 17 Dec 2015, at 18:37, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>>>>> wrote:
>>>>> >
>>>>> > concentrator..... you never commented on that?
>>>>> >
>>>>> > 2015-12-17 19:12 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>> > Hi,
>>>>> >
>>>>> > > On 17 Dec 2015, at 14:40, Jeremy Poulter <jeremy at bigjungle.net>
>>>>> wrote:
>>>>> > >
>>>>> > > I think I have deciphered all the JSON tags, can someone confirm
>>>>> this list is correct?
>>>>> > >
>>>>> > > @: Node ID
>>>>> > > T|C16: room temperature in 1/16 C
>>>>> > > B|mV: battery voltage in mV
>>>>> > > occ|%: occupancy percentage
>>>>> > > O: occupancy in 0-3
>>>>> > > v|%: valve position percentage
>>>>> > > vac|h: vacancy hours?
>>>>> > > L: ambient light 0-255?
>>>>> > > H|%: humidity percentage
>>>>> > > vC|%: cumulative valve movement percentage
>>>>> > > tT|C: nominal target temperature in C
>>>>> >
>>>>> > Looks good.
>>>>> >
>>>>> > We do add others, for example, “b” (value 0 or 1) for boiler on.
>>>>> >
>>>>> > There is also B|cV for battery voltage in centivolts (to save a
>>>>> useless digit)!
>>>>> >
>>>>> > Rgds
>>>>> >
>>>>> > Damon
>>>>> >
>>>>> > _______________________________________________
>>>>> > OpenTRV-dev mailing list
>>>>> > OpenTRV-dev at lists.opentrv.org.uk
>>>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>> >
>>>>> > _______________________________________________
>>>>> > OpenTRV-dev mailing list
>>>>> > OpenTRV-dev at lists.opentrv.org.uk
>>>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151219/c74e0e01/attachment.html>