[OpenTRV-dev] V0p2 board here?
Deniz Erbilgin
deniz.erbilgin at gmail.com
Fri Nov 6 16:05:07 GMT 2015
What version of the arduino IDE are you using (and is it from .cc or .org)?
Regards,
Deniz
On 06/11/15 15:21, Jeremy Poulter wrote:
> Ah sorry, it was that one I was using, it was the two libraries
> OTRadioLink and OTProtocolCC that where from the OpenTRV github.
>
> Jeremy
>
> On 6 November 2015 at 14:40, Deniz Erbilgin <deniz.erbilgin at gmail.com
> <mailto:deniz.erbilgin at gmail.com>> wrote:
>
> As far as I know the repo you've linked is currently just a place
> holder. We're currently developing on is this one:
>
> https://github.com/DamonHD/OpenTRV
>
> The latest firmware is under ./Arduino/V0p2_Main
>
> You should also make sure you have the latest version of
> OTRadioLink from https://github.com/opentrv/OTRadioLink because
> we've done a lot of refactoring recently.
>
> Regards,
>
> Deniz
>
>
>
> On 06/11/15 14:12, Jeremy Poulter wrote:
>> I have a first version of this at
>> http://jeremy.bigjungle.net/opentrv/package_opentrv_index.json I
>> think it is ok but I am having troubles testing;
>>
>> a) I can compile Blink and other examples but I am reluctant to
>> upload because of;
>> b) I can not compile the V0p2 firmware (with any board, Uno etc)
>> it just pauses after the first file with no errors
>>
>> The code is the latest version (as of a few hours ago) from
>> https://github.com/opentrv/opentrv.git.
>>
>> Can anyone either tell me what is wrong with my setup re:
>> building the firmware or give the above like a go and let me know
>> if it works?
>>
>> Jeremy
>>
>> FYI the build log is;
>>
>>
>> Build options changed, rebuilding all
>> Using library OTProtocolCC in folder:
>> C:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC (legacy)
>> Using library SPI in folder:
>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
>>
>> Using library Wire in folder:
>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
>>
>> Using library OTRadioLink in folder:
>> C:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink (legacy)
>>
>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5/bin/avr-g++
>> -c -g -Os -Wall -Wextra -fno-exceptions -ffunction-sections
>> -fdata-sections -fno-threadsafe-statics -MMD -mmcu=atmega328p
>> -DF_CPU=1000000L -DARDUINO=10604 -DARDUINO_AVR_V0P2
>> -DARDUINO_ARCH_AVR
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\cores\arduino
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\variants\standard
>> -IC:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
>> -IC:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink
>> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp
>> -o
>> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp.o
>>
>>
>>
>> On 5 November 2015 at 11:13, Jeremy Poulter <jeremy at bigjungle.net
>> <mailto:jeremy at bigjungle.net>> wrote:
>>
>> Thanks, I think that is sufficient but will drop an email if
>> I need more info.
>>
>> Jeremy
>>
>> On 5 November 2015 at 11:03, Damon Hart-Davis <dhd at exnet.com
>> <mailto:dhd at exnet.com>> wrote:
>>
>> Hi,
>>
>> 1) Thanks!
>>
>> 2) REV2 is one of the revisions/variants of our V0p2
>> design (ATmega328P based).
>>
>> 3) Here’s the main setup page, but tell me if you need
>> more: https://sourceforge.net/p/opentrv/wiki/Arduino/
>>
>> Rgds
>>
>> Damon
>>
>>
>> > On 5 Nov 2015, at 10:57, Jeremy Poulter
>> <jeremy at bigjungle.net <mailto:jeremy at bigjungle.net>> wrote:
>> >
>> > I can give it a go. Need to get setup so I can update
>> the firmware on my Rev 2 board anyway (is that the same
>> as V0p2?). Can you point me at the docs for the IDE setup?
>> >
>> > Jeremy
>> >
>> > On 5 November 2015 at 10:14, Damon Hart-Davis
>> <dhd at exnet.com <mailto:dhd at exnet.com>> wrote:
>> > OK, thanks!
>> >
>> > Separate question then: anyone volunteering to
>> formulate the file?
>> >
>> > I will find somewhere suitable to locate it, eg GitHub
>> or earth.org.uk <http://earth.org.uk>.
>> >
>> > Rgds
>> >
>> > Damon
>> >
>> > > On 5 Nov 2015, at 09:25, Damon Hart-Davis
>> <dhd at exnet.com <mailto:dhd at exnet.com>> wrote:
>> > >
>> > > Should the V0p2 board description be going here to
>> make life easier, somehow, or do I have the wrong end of
>> the stick as usual?
>> > >
>> > >
>> https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls
>> > >
>> > > Rgds
>> > >
>> > > Damon
>> >
>> > _______________________________________________
>> > OpenTRV-dev mailing list
>> > OpenTRV-dev at lists.opentrv.org.uk
>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> >
>> > _______________________________________________
>> > OpenTRV-dev mailing list
>> > OpenTRV-dev at lists.opentrv.org.uk
>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>>
>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151106/fe08e850/attachment-0001.html>
More information about the OpenTRV-dev
mailing list