[OpenTRV-dev] V0p2 board here?

Fri Nov 6 16:57:01 GMT 2015

Arduino 1.6.4 from arduino.cc

Jeremy

On 6 November 2015 at 16:05, Deniz Erbilgin <deniz.erbilgin at gmail.com>
wrote:

> What version of the arduino IDE are you using (and is it from .cc or .org)?
>
> Regards,
>
> Deniz
>
>
> On 06/11/15 15:21, Jeremy Poulter wrote:
>
> Ah sorry, it was that one I was using, it was the two libraries
> OTRadioLink and OTProtocolCC that where from the OpenTRV github.
>
> Jeremy
>
> On 6 November 2015 at 14:40, Deniz Erbilgin <deniz.erbilgin at gmail.com>
> wrote:
>
>> As far as I know the repo you've linked is currently just a place holder.
>> We're currently developing on is this one:
>>
>> https://github.com/DamonHD/OpenTRV
>>
>> The latest firmware is under ./Arduino/V0p2_Main
>>
>> You should also make sure you have the latest version of OTRadioLink from
>> https://github.com/opentrv/OTRadioLink because we've done a lot of
>> refactoring recently.
>>
>> Regards,
>>
>> Deniz
>>
>>
>>
>> On 06/11/15 14:12, Jeremy Poulter wrote:
>>
>> I have a first version of this at
>> <http://jeremy.bigjungle.net/opentrv/package_opentrv_index.json>
>> http://jeremy.bigjungle.net/opentrv/package_opentrv_index.json I think
>> it is ok but I am having troubles testing;
>>
>> a) I can compile Blink and other examples but I am reluctant to upload
>> because of;
>> b) I can not compile the V0p2 firmware (with any board, Uno etc) it just
>> pauses after the first file with no errors
>>
>> The code is the latest version (as of a few hours ago) from
>> https://github.com/opentrv/opentrv.git.
>>
>> Can anyone either tell me what is wrong with my setup re: building the
>> firmware or give the above like a go and let me know if it works?
>>
>> Jeremy
>>
>> FYI the build log is;
>>
>>
>> Build options changed, rebuilding all
>> Using library OTProtocolCC in folder:
>> C:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC (legacy)
>> Using library SPI in folder:
>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
>> Using library Wire in folder:
>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
>> Using library OTRadioLink in folder:
>> C:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink (legacy)
>>
>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5/bin/avr-g++
>> -c -g -Os -Wall -Wextra -fno-exceptions -ffunction-sections -fdata-sections
>> -fno-threadsafe-statics -MMD -mmcu=atmega328p -DF_CPU=1000000L
>> -DARDUINO=10604 -DARDUINO_AVR_V0P2 -DARDUINO_ARCH_AVR
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\cores\arduino
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\variants\standard
>> -IC:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
>> -IC:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink
>> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp
>> -o
>> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp.o
>>
>>
>> On 5 November 2015 at 11:13, Jeremy Poulter < <jeremy at bigjungle.net>
>> jeremy at bigjungle.net> wrote:
>>
>>> Thanks, I think that is sufficient but will drop an email if I need more
>>> info.
>>>
>>> Jeremy
>>>
>>> On 5 November 2015 at 11:03, Damon Hart-Davis < <dhd at exnet.com>
>>> dhd at exnet.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> 1) Thanks!
>>>>
>>>> 2) REV2 is one of the revisions/variants of our V0p2 design (ATmega328P
>>>> based).
>>>>
>>>> 3) Here’s the main setup page, but tell me if you need more:
>>>> <https://sourceforge.net/p/opentrv/wiki/Arduino/>
>>>> https://sourceforge.net/p/opentrv/wiki/Arduino/
>>>>
>>>> Rgds
>>>>
>>>> Damon
>>>>
>>>>
>>>> > On 5 Nov 2015, at 10:57, Jeremy Poulter < <jeremy at bigjungle.net>
>>>> jeremy at bigjungle.net> wrote:
>>>> >
>>>> > I can give it a go. Need to get setup so I can update the firmware on
>>>> my Rev 2 board anyway (is that the same as V0p2?). Can you point me at the
>>>> docs for the IDE setup?
>>>> >
>>>> > Jeremy
>>>> >
>>>> > On 5 November 2015 at 10:14, Damon Hart-Davis < <dhd at exnet.com>
>>>> dhd at exnet.com> wrote:
>>>> > OK, thanks!
>>>> >
>>>> > Separate question then: anyone volunteering to formulate the file?
>>>> >
>>>> > I will find somewhere suitable to locate it, eg GitHub or
>>>> earth.org.uk.
>>>> >
>>>> > Rgds
>>>> >
>>>> > Damon
>>>> >
>>>> > > On 5 Nov 2015, at 09:25, Damon Hart-Davis < <dhd at exnet.com>
>>>> dhd at exnet.com> wrote:
>>>> > >
>>>> > > Should the V0p2 board description be going here to make life
>>>> easier, somehow, or do I have the wrong end of the stick as usual?
>>>> > >
>>>> > >
>>>> <https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls>
>>>> https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls
>>>> > >
>>>> > > Rgds
>>>> > >
>>>> > > Damon
>>>> >
>>>> > _______________________________________________
>>>> > OpenTRV-dev mailing list
>>>> > OpenTRV-dev at lists.opentrv.org.uk
>>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>> >
>>>> > _______________________________________________
>>>> > OpenTRV-dev mailing list
>>>> > OpenTRV-dev at lists.opentrv.org.uk
>>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>
>>>
>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing listOpenTRV-dev at lists.opentrv.org.ukhttp://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
>
> _______________________________________________
> OpenTRV-dev mailing listOpenTRV-dev at lists.opentrv.org.ukhttp://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151106/5855954a/attachment.html>