[OpenTRV-dev] V0p2 board here?
Deniz Erbilgin
deniz.erbilgin at gmail.com
Fri Nov 6 18:01:43 GMT 2015
I'm using 1.6.5. Don't know if switching to it would change anything
though. It may be worth it just too see if it's a problem with your
installation.
Also, we've just fixed the mainline (apparently it was broken around
lunchtime) so you should get the latest version.
Regards,
Deniz
On 06/11/15 16:57, Jeremy Poulter wrote:
> Arduino 1.6.4 from arduino.cc
>
> Jeremy
>
> On 6 November 2015 at 16:05, Deniz Erbilgin <deniz.erbilgin at gmail.com
> <mailto:deniz.erbilgin at gmail.com>> wrote:
>
> What version of the arduino IDE are you using (and is it from .cc
> or .org)?
>
> Regards,
>
> Deniz
>
>
> On 06/11/15 15:21, Jeremy Poulter wrote:
>> Ah sorry, it was that one I was using, it was the two libraries
>> OTRadioLink and OTProtocolCC that where from the OpenTRV github.
>>
>> Jeremy
>>
>> On 6 November 2015 at 14:40, Deniz Erbilgin
>> <deniz.erbilgin at gmail.com <mailto:deniz.erbilgin at gmail.com>> wrote:
>>
>> As far as I know the repo you've linked is currently just a
>> place holder. We're currently developing on is this one:
>>
>> https://github.com/DamonHD/OpenTRV
>>
>> The latest firmware is under ./Arduino/V0p2_Main
>>
>> You should also make sure you have the latest version of
>> OTRadioLink from https://github.com/opentrv/OTRadioLink
>> because we've done a lot of refactoring recently.
>>
>> Regards,
>>
>> Deniz
>>
>>
>>
>> On 06/11/15 14:12, Jeremy Poulter wrote:
>>> I have a first version of this at
>>> http://jeremy.bigjungle.net/opentrv/package_opentrv_index.json
>>> I think it is ok but I am having troubles testing;
>>>
>>> a) I can compile Blink and other examples but I am reluctant
>>> to upload because of;
>>> b) I can not compile the V0p2 firmware (with any board, Uno
>>> etc) it just pauses after the first file with no errors
>>>
>>> The code is the latest version (as of a few hours ago) from
>>> https://github.com/opentrv/opentrv.git.
>>>
>>> Can anyone either tell me what is wrong with my setup re:
>>> building the firmware or give the above like a go and let me
>>> know if it works?
>>>
>>> Jeremy
>>>
>>> FYI the build log is;
>>>
>>>
>>> Build options changed, rebuilding all
>>> Using library OTProtocolCC in folder:
>>> C:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC
>>> (legacy)
>>> Using library SPI in folder:
>>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
>>>
>>> Using library Wire in folder:
>>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
>>>
>>> Using library OTRadioLink in folder:
>>> C:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink (legacy)
>>>
>>> C:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\tools\avr-gcc\4.8.1-arduino5/bin/avr-g++
>>> -c -g -Os -Wall -Wextra -fno-exceptions -ffunction-sections
>>> -fdata-sections -fno-threadsafe-statics -MMD
>>> -mmcu=atmega328p -DF_CPU=1000000L -DARDUINO=10604
>>> -DARDUINO_AVR_V0P2 -DARDUINO_ARCH_AVR
>>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\cores\arduino
>>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\variants\standard
>>> -IC:\Users\jeremy\Documents\Arduino\libraries\OTProtocolCC
>>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\SPI
>>> -IC:\Users\jeremy\AppData\Roaming\Arduino15\packages\arduino\hardware\avr\1.6.8\libraries\Wire
>>> -IC:\Users\jeremy\Documents\Arduino\libraries\OTRadioLink
>>> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp
>>> -o
>>> C:\Users\jeremy\AppData\Local\Temp\build8179085015090323129.tmp\AltMain.cpp.o
>>>
>>>
>>>
>>> On 5 November 2015 at 11:13, Jeremy Poulter
>>> <jeremy at bigjungle.net <mailto:jeremy at bigjungle.net>> wrote:
>>>
>>> Thanks, I think that is sufficient but will drop an
>>> email if I need more info.
>>>
>>> Jeremy
>>>
>>> On 5 November 2015 at 11:03, Damon Hart-Davis
>>> <dhd at exnet.com <mailto:dhd at exnet.com>> wrote:
>>>
>>> Hi,
>>>
>>> 1) Thanks!
>>>
>>> 2) REV2 is one of the revisions/variants of our V0p2
>>> design (ATmega328P based).
>>>
>>> 3) Here’s the main setup page, but tell me if you
>>> need more:
>>> https://sourceforge.net/p/opentrv/wiki/Arduino/
>>>
>>> Rgds
>>>
>>> Damon
>>>
>>>
>>> > On 5 Nov 2015, at 10:57, Jeremy Poulter
>>> <jeremy at bigjungle.net <mailto:jeremy at bigjungle.net>>
>>> wrote:
>>> >
>>> > I can give it a go. Need to get setup so I can
>>> update the firmware on my Rev 2 board anyway (is
>>> that the same as V0p2?). Can you point me at the
>>> docs for the IDE setup?
>>> >
>>> > Jeremy
>>> >
>>> > On 5 November 2015 at 10:14, Damon Hart-Davis
>>> <dhd at exnet.com <mailto:dhd at exnet.com>> wrote:
>>> > OK, thanks!
>>> >
>>> > Separate question then: anyone volunteering to
>>> formulate the file?
>>> >
>>> > I will find somewhere suitable to locate it, eg
>>> GitHub or earth.org.uk <http://earth.org.uk>.
>>> >
>>> > Rgds
>>> >
>>> > Damon
>>> >
>>> > > On 5 Nov 2015, at 09:25, Damon Hart-Davis
>>> <dhd at exnet.com <mailto:dhd at exnet.com>> wrote:
>>> > >
>>> > > Should the V0p2 board description be going here
>>> to make life easier, somehow, or do I have the wrong
>>> end of the stick as usual?
>>> > >
>>> > >
>>> https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls
>>> > >
>>> > > Rgds
>>> > >
>>> > > Damon
>>> >
>>> > _______________________________________________
>>> > OpenTRV-dev mailing list
>>> > OpenTRV-dev at lists.opentrv.org.uk
>>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>> >
>>> > _______________________________________________
>>> > OpenTRV-dev mailing list
>>> > OpenTRV-dev at lists.opentrv.org.uk
>>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> <mailto:OpenTRV-dev at lists.opentrv.org.uk>
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151106/108ff23a/attachment-0001.html>
More information about the OpenTRV-dev
mailing list