[OpenTRV-dev] VERY OT:

[Bo Herrmannsen]

maybe this one:
https://github.com/tvdzwan/hyperion/wiki/Make-Raspbian-Read-Only

2016-03-28 16:10 GMT+02:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:

> but i cant wait until you can give a link or 2.... i will just let this
> system run in read-write mode until i can figure it
>
> 2016-03-28 15:54 GMT+02:00 Jeremy Poulter <jeremy at bigjungle.net>:
>
>> There are probably a few solutions to this probably the nicest would be
>> to use UnionFS or similar to overlay a writable /tmp directory over
>> /home/pi
>>
>> Alternatively (and maybe a bit less of a learning curve) move /home/pi to
>> some other location (eg /home/pi.readonly). Mount a tmpfs on /home/pi and
>> then copy the content of the /home/pi.readonly to /home/pi. Be warned
>> however tmpfs uses DRAM as storage so may not be good for long term
>> sessions.
>>
>> Yet another option that may help is to have a read/write partition
>> monuted to /home/pi. Have a look at the guides by Open Energy Monitor on
>> setting up the EmonBase. You could even delete the content on boot up and
>> copy a clean version as with the previous example.
>>
>> Jeremy
>>
>> PS sorry for the lack of links doing this on a phone, bit Google is your
>> friend 😉
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20160328/860cfcbe/attachment.html>