[OpenTRV-interest] Programmable TRV performance

[Mark Wigmore]

Is the split configuration available as a kit or even assembled?

Mark

On 16 February 2015 at 16:17, Damon Hart-Davis <EMAIL ADDRESS HIDDEN> wrote:

> Hi,
>
> The split configuration does this already.
>
> The all-in-one unit probably requires some TLC to help work round the
> issue that you observe: I’m still working on fixing the closest analogue
> that I have at the moment.
>
> Rgds
>
> Damon
>
> > On 16 Feb 2015, at 16:12, Mark Wigmore <EMAIL ADDRESS HIDDEN> wrote:
> >
> > Is OpenTRV sufficiently advanced to do this yet?
> >
> > Mark
> >
> > On 16 February 2015 at 16:10, Damon Hart-Davis <EMAIL ADDRESS HIDDEN> wrote:
> > Hi,
> >
> > Note of course that you may have temperature gradients across the room:
> in one of mine I observe ~2C for example.
> >
> > So have the sensor near you if possible if this is an issue for you!
> >
> > Rgds
> >
> > Damon
> >
> >
> > > On 16 Feb 2015, at 16:06, Mark Wigmore <EMAIL ADDRESS HIDDEN> wrote:
> > >
> > > Thanks Damon, I was thinking it might be a combination of factors as
> you suggest.
> > >
> > > Looks like the best thing would be to have a TRV controlled by a
> wireless sensor in another part of the room.
> > >
> > > Cheers,
> > >
> > > Mark
> > >
> > > On 16 February 2015 at 15:49, Damon Hart-Davis <EMAIL ADDRESS HIDDEN> wrote:
> > > Hi,
> > >
> > > It may start closing well before the target temperature to try to
> minimise fluctuations; I start closing about 1C below the target I have in
> the OpenTRV control loop.
> > >
> > > Also it may see some direct radiative heating as I sometimes do on
> OpenTRV units, and be reacting to that.  It’s still something I’m working
> on handling fully elegantly.
> > >
> > > There may also be a calibration error of +/- 1C on the temeprature
> sensor (the one we use are closer than that).
> > >
> > > In other words, that place may be approaching 20C including direct
> radiative heat and air rising from the flow/return pipe when the valve
> closes thinking that it’s hit 21C.
> > >
> > > Rgds
> > >
> > > Damon
> > >
> > > > On 16 Feb 2015, at 14:52, Mark Wigmore <EMAIL ADDRESS HIDDEN> wrote:
> > > >
> > > > Hi,
> > > >
> > > > Sorry if this is a bit OT, but I thought people in this forum might
> be the most likely to know the answer.
> > > >
> > > > I have a Honeywell HR25 programmable thermostat on my bedroom
> radiator. It is programmed for 21degC in the mornings, but I can hear the
> valve start closing from about 17.5deg as the room warms up and completely
> closed by 19deg room temperature. There's a good airgap all round the TRV;
> 500mm to the bed, 300mm gap under the bed, and 600mm at the end of the bed
> nearest the TRV. There is a window 240mm above the rad and the curtain
> stops 170 above.
> > > >
> > > > Any idea what's going on?
> > > >
> > > > Regards,
> > > >
> > > > Mark
> > > > _______________________________________________
> > > > OpenTRV-interest mailing list
> > > > EMAIL ADDRESS HIDDEN
> > > > http://lists.opentrv.org.uk/listinfo/opentrv-interest
> > >
> > > _______________________________________________
> > > OpenTRV-interest mailing list
> > > EMAIL ADDRESS HIDDEN
> > > http://lists.opentrv.org.uk/listinfo/opentrv-interest
> > >
> > > _______________________________________________
> > > OpenTRV-interest mailing list
> > > EMAIL ADDRESS HIDDEN
> > > http://lists.opentrv.org.uk/listinfo/opentrv-interest
> >
> > _______________________________________________
> > OpenTRV-interest mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-interest
> >
> > _______________________________________________
> > OpenTRV-interest mailing list
> > EMAIL ADDRESS HIDDEN
> > http://lists.opentrv.org.uk/listinfo/opentrv-interest
>
> _______________________________________________
> OpenTRV-interest mailing list
> EMAIL ADDRESS HIDDEN
> http://lists.opentrv.org.uk/listinfo/opentrv-interest
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-interest/attachments/20150216/82a4a85b/attachment.html>