[OpenTRV-dev] What else do i need

[Paul Smith]

Hi Gyus

Have you seen these radios as an alternative to the EOL rfm23b

http://gizmosnack.blogspot.se/2013/04/tutorial-nrf24l01-and-avr.html

Do they sound any good for opentrv.

Regards

Paul



On 6 April 2013 21:23, Mike Stirling <EMAIL ADDRESS HIDDEN> wrote:

>  I would have said TME in Europe (www.tme.eu), but their stocks appear to
> be dwindling already.  Don't worry about it too much, though.  There are
> other modules which, while not as cheap, would still be suitable.  I also
> haven't ruled out doing my own module based on the newer SiLabs transceiver
> chip or the TI CC1101.
>
> Mike
>
>
> On 06/04/13 20:47, Paul Smith wrote:
>
> Hi Mike,
>
> That's great. I know the rfm23b is going eol. I'm thinking I should order
> enough now to complete my project.
>
> Where would you suggest is best.
>
> Regards,
>
> Paul
>
> --
> Paul Smith
>
> Your Local Computer Specialist, Supporting Your Business When You Need It
> Most
>
> We also now do Portable Appliance Testing, if you would like to know more
> please drop us a line.
>
> Tel:-  0845 009 6226
>
> This email and any attachments may be confidential and/or privileged.
> Everything is intended for use of the addressee only. If you receive this
> message in error then you must not print it or pass it on to anyone else or
> use the information it contains.  Please inform Phoenix Technology UK  of
> the error by email or by telephoning (+44)(0)845 009 6226.  Please then
> delete all copies from your system.
> If you are not the intended recipient then you must not use the
> information in the message or attachments or allow anyone else to do so.
>  On 6 Apr 2013 18:04, "Mike Stirling" <EMAIL ADDRESS HIDDEN> wrote:
>
>> Hi Paul,
>>
>> Yes I am doing custom code for that, and it seems likely that it will
>> form the basis for the AVR branch of OpenTRV.  The mods I have done are to
>> add an RFM23B and to break out the programming pins to an external header.
>>  These are currently just wire-mods, but I am considering whether there is
>> any scope for fitting headers that would plug in to a small custom board,
>> which would make assembly easier.  I'll be writing all this up online soon
>> and publishing the code, but I wanted to make some actual progress first.
>>
>> Any AVR programmer will do, but I would recommend the Atmel one, which is
>> the one you linked to.  Probably easier getting it from Farnell or RS.
>>
>> I'll keep you posted on the RPi board.  Still waiting for the blank
>> boards to come back.
>>
>> Mike
>>
>> On 06/04/13 13:41, Paul Smith wrote:
>>
>>> Hi Mike,
>>>
>>> After the opentrv chat/google hangout last thrusday.
>>>
>>> I've ordered 5 of the Comet Sparmatic TRV's they came with better WAF
>>> which is always important. I understand that you are building new code for
>>> the device.
>>>
>>> What else would i need to get me going. I have a  Rpi so believe that
>>> you have built a radio board for it. Which i would like to buy. I also know
>>> that you have add a radio module to the commet. Is this a rfm23b
>>>
>>> I think i need something like this
>>> http://store.atmel.com/PartDetail.aspx?q=p:10500054#tc:description can
>>> you point me in the right direction.
>>>
>>> Thanks in advance for your help.
>>>
>>> Regards
>>>
>>> Paul
>>>
>>>
>>>
>>
>


-- 
Paul Smith

Your Local Computer Specialist, Supporting Your Business When You Need It
Most

We also now do Portable Appliance Testing, if you would like to know more
please drop us a line.

Tel:-  0845 009 6226

This email and any attachments may be confidential and/or privileged.
Everything is intended for use of the addressee only. If you receive this
message in error then you must not print it or pass it on to anyone else or
use the information it contains.  Please inform Phoenix Technology UK  of
the error by email or by telephoning (+44)(0)845 009 6226.  Please then
delete all copies from your system.
If you are not the intended recipient then you must not use the information
in the message or attachments or allow anyone else to do so.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20130410/2431a352/attachment.html>