[OpenTRV-dev] Software for hardware rev. 2

Wed Aug 20 17:12:16 BST 2014


You have to hold down the BRB (it is polled every 2s, not interrupt driven) and the LED should cycle through its states.

No harm getting the latest code; I’m always tweaking something.

When we get nearer to actually winter I'll make a stable ‘release’ for people to use if they don’t want to be on the bleeding edge.



On 20 Aug 2014, at 16:30, Gareth Coleman <EMAIL ADDRESS HIDDEN> wrote:

> Hello all
> I didn't get a chance to chat with Daemon at Wuthering Bytes so I'll ask you all here:
> Should I get a more recent version of software to go with my rev.2 hardware?
> I've got the button all nicely mounted in it's box with a dc power supply and boiler relay. I know the hardware is working because I logged into the command line while the plumber was here and got it to engage the heating.
> Since then the light flashes occasionally but seems to be unresponsive to the big red button. I'm tempted to flash it with the latest software - from github? or sourceforge?
> Any suggestions or dragons to be slayed?
> -- 
> ------------------------
> Gareth Coleman
> layer zero labs
> l0l.org.uk
> _______________________________________________
> OpenTRV-dev mailing list
> http://lists.opentrv.org.uk/listinfo/opentrv-dev

More information about the OpenTRV-dev mailing list