[OpenTRV-dev] OpenTRV-dev Digest, Vol 34, Issue 5

Wed Dec 16 12:14:04 GMT 2015

Also, aside from this project, I was planning to do an ebus interface with
my Vaillant boiler to read out temperature / control set point.

I see in the presentation that there's a boiler controller. Which bus
protocol does it use? Or is this just a simple on/off relay?

2015-12-16 13:09 GMT+01:00 <opentrv-dev-request at lists.opentrv.org.uk>:

> Send OpenTRV-dev mailing list submissions to
>         opentrv-dev at lists.opentrv.org.uk
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.opentrv.org.uk/listinfo/opentrv-dev
> or, via email, send a message with subject or body 'help' to
>         opentrv-dev-request at lists.opentrv.org.uk
>
> You can reach the person managing the list at
>         opentrv-dev-owner at lists.opentrv.org.uk
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of OpenTRV-dev digest..."
>
>
> Today's Topics:
>
>    1. Re: OpenTRV-dev Digest, Vol 34, Issue 4 (Jeroen Peelaerts)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 16 Dec 2015 13:09:05 +0100
> From: Jeroen Peelaerts <jeroen.peelaerts at gmail.com>
> To: opentrv-dev at lists.opentrv.org.uk
> Subject: Re: [OpenTRV-dev] OpenTRV-dev Digest, Vol 34, Issue 4
> Message-ID:
>         <
> CAP8zLqfKxAUzgSaUnpZG46+kHyHMnEf-gVyPAAw5Nmcsm4HNDg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I have no problem to pay for a board or two. Think it would be better to
> work with the real hardware directly instead of using prototypes on
> breadboard :)
>
> I'm also co organising a bi annual 'Arduino Jam' event here in Belgium in
> which people team up to work on different projects. I think there might be
> interest in OpenTrv and once I have the hardware, I'll can propose a
> project around it (with the intention to contribute the results back to the
> project).
>
> Maybe email me directly to arrange the board delivery?
>
> Thanks!
>
>
>
> 2015-12-16 12:09 GMT+01:00 <opentrv-dev-request at lists.opentrv.org.uk>:
>
> > Send OpenTRV-dev mailing list submissions to
> >         opentrv-dev at lists.opentrv.org.uk
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >         http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > or, via email, send a message with subject or body 'help' to
> >         opentrv-dev-request at lists.opentrv.org.uk
> >
> > You can reach the person managing the list at
> >         opentrv-dev-owner at lists.opentrv.org.uk
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of OpenTRV-dev digest..."
> >
> >
> > Today's Topics:
> >
> >    1. OpenTRV boards (Jeroen Peelaerts)
> >    2. Re: OpenTRV boards (Damon Hart-Davis)
> >    3. Re: OpenTRV boards (Bo Herrmannsen)
> >    4. Re: OpenTRV boards (Bo Herrmannsen)
> >    5. Re: OpenTRV boards (Damon Hart-Davis)
> >    6. Re: OpenTRV boards (Damon Hart-Davis)
> >    7. Re: OpenTRV boards (Bo Herrmannsen)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Wed, 16 Dec 2015 10:59:56 +0100
> > From: Jeroen Peelaerts <jeroen.peelaerts at gmail.com>
> > To: opentrv-dev at lists.opentrv.org.uk
> > Subject: [OpenTRV-dev] OpenTRV boards
> > Message-ID:
> >         <CAP8zLqdq18J-f3ABgc2jaCvavC5oo3LbKZRNpcb+S=
> > qXdhA7ng at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hello all,
> >
> > Glad to see my subscription was accepted. I came across opentrv while
> > looking for an opensource trv system for my home. Good thing is that I
> > don't need to start from scratch now as I can focus to make some
> > contributions to this project instead.
> >
> > What I'm particulary interested in is integration with open energy
> monitor.
> > That's why I would like to ask if there's a possibility to get a hold of
> a
> > couple of boards to do some testing / development on. Also any links to
> > ongoing discussion on these integration might be useful.
> >
> > Also would be nice to have some boards available for early adopters or
> > contributors to help the project move forward. If anyone can help me on
> > this one, then drop me a line.
> >
> > Thanks in advance,
> >
> > Jeroen.
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/7d7ecd25/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Wed, 16 Dec 2015 10:35:45 +0000
> > From: Damon Hart-Davis <dhd at exnet.com>
> > To: Closed list for developer discussions
> >         <opentrv-dev at lists.opentrv.org.uk>
> > Subject: Re: [OpenTRV-dev] OpenTRV boards
> > Message-ID: <5CFAA969-4E98-4892-BFB6-52BBA04C47DE at exnet.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > Hi,
> >
> > At the moment we are trying to get some manufacturing done very fast to
> > support trials in social housing for this heating season.
> >
> > So the well is a bit try on boards at the moment though we do have a few
> > REV2 kits available (?25+VAT) and putting a minimal system together on
> > breadboard is not that tricky (we have configs to support that) to get
> > going.
> >
> > Does any of that help?
> >
> > Rgds
> >
> > Damon
> >
> >
> > > On 16 Dec 2015, at 09:59, Jeroen Peelaerts <jeroen.peelaerts at gmail.com
> >
> > wrote:
> > >
> > > Hello all,
> > >
> > > Glad to see my subscription was accepted. I came across opentrv while
> > looking for an opensource trv system for my home. Good thing is that I
> > don't need to start from scratch now as I can focus to make some
> > contributions to this project instead.
> > >
> > > What I'm particulary interested in is integration with open energy
> > monitor. That's why I would like to ask if there's a possibility to get a
> > hold of a couple of boards to do some testing / development on. Also any
> > links to ongoing discussion on these integration might be useful.
> > >
> > > Also would be nice to have some boards available for early adopters or
> > contributors to help the project move forward. If anyone can help me on
> > this one, then drop me a line.
> > >
> > > Thanks in advance,
> > >
> > > Jeroen.
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > OpenTRV-dev mailing list
> > > OpenTRV-dev at lists.opentrv.org.uk
> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Wed, 16 Dec 2015 11:46:40 +0100
> > From: Bo Herrmannsen <bo.herrmannsen at gmail.com>
> > To: Closed list for developer discussions
> >         <opentrv-dev at lists.opentrv.org.uk>
> > Subject: Re: [OpenTRV-dev] OpenTRV boards
> > Message-ID:
> >         <CAFqpYu5raRrd5LvGOejBybgs0swCDc9kGhxO7Ui6Gy+zTY=
> > seg at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > found it... goggle marked as spam. so it was binned
> >
> > 2015-12-16 11:35 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
> >
> > > Hi,
> > >
> > > At the moment we are trying to get some manufacturing done very fast to
> > > support trials in social housing for this heating season.
> > >
> > > So the well is a bit try on boards at the moment though we do have a
> few
> > > REV2 kits available (?25+VAT) and putting a minimal system together on
> > > breadboard is not that tricky (we have configs to support that) to get
> > > going.
> > >
> > > Does any of that help?
> > >
> > > Rgds
> > >
> > > Damon
> > >
> > >
> > > > On 16 Dec 2015, at 09:59, Jeroen Peelaerts <
> jeroen.peelaerts at gmail.com
> > >
> > > wrote:
> > > >
> > > > Hello all,
> > > >
> > > > Glad to see my subscription was accepted. I came across opentrv while
> > > looking for an opensource trv system for my home. Good thing is that I
> > > don't need to start from scratch now as I can focus to make some
> > > contributions to this project instead.
> > > >
> > > > What I'm particulary interested in is integration with open energy
> > > monitor. That's why I would like to ask if there's a possibility to
> get a
> > > hold of a couple of boards to do some testing / development on. Also
> any
> > > links to ongoing discussion on these integration might be useful.
> > > >
> > > > Also would be nice to have some boards available for early adopters
> or
> > > contributors to help the project move forward. If anyone can help me on
> > > this one, then drop me a line.
> > > >
> > > > Thanks in advance,
> > > >
> > > > Jeroen.
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > OpenTRV-dev mailing list
> > > > OpenTRV-dev at lists.opentrv.org.uk
> > > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >
> > > _______________________________________________
> > > OpenTRV-dev mailing list
> > > OpenTRV-dev at lists.opentrv.org.uk
> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/3151cb7f/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Wed, 16 Dec 2015 11:54:24 +0100
> > From: Bo Herrmannsen <bo.herrmannsen at gmail.com>
> > To: Closed list for developer discussions
> >         <opentrv-dev at lists.opentrv.org.uk>
> > Subject: Re: [OpenTRV-dev] OpenTRV boards
> > Message-ID:
> >         <CAFqpYu7DhAx2UJpWD0D4Xo59o=eDvEQS2QcsPnAJ3JtxEk=
> > SZQ at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > if that integration works comes back to the project (openTRV) could we
> not
> > argue that we could send 1 max 2 ?
> >
> >
> > if not much mistaken then the goal here is to get data from the units and
> > control back
> >
> > 2015-12-16 11:35 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
> >
> > > Hi,
> > >
> > > At the moment we are trying to get some manufacturing done very fast to
> > > support trials in social housing for this heating season.
> > >
> > > So the well is a bit try on boards at the moment though we do have a
> few
> > > REV2 kits available (?25+VAT) and putting a minimal system together on
> > > breadboard is not that tricky (we have configs to support that) to get
> > > going.
> > >
> > > Does any of that help?
> > >
> > > Rgds
> > >
> > > Damon
> > >
> > >
> > > > On 16 Dec 2015, at 09:59, Jeroen Peelaerts <
> jeroen.peelaerts at gmail.com
> > >
> > > wrote:
> > > >
> > > > Hello all,
> > > >
> > > > Glad to see my subscription was accepted. I came across opentrv while
> > > looking for an opensource trv system for my home. Good thing is that I
> > > don't need to start from scratch now as I can focus to make some
> > > contributions to this project instead.
> > > >
> > > > What I'm particulary interested in is integration with open energy
> > > monitor. That's why I would like to ask if there's a possibility to
> get a
> > > hold of a couple of boards to do some testing / development on. Also
> any
> > > links to ongoing discussion on these integration might be useful.
> > > >
> > > > Also would be nice to have some boards available for early adopters
> or
> > > contributors to help the project move forward. If anyone can help me on
> > > this one, then drop me a line.
> > > >
> > > > Thanks in advance,
> > > >
> > > > Jeroen.
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > OpenTRV-dev mailing list
> > > > OpenTRV-dev at lists.opentrv.org.uk
> > > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >
> > > _______________________________________________
> > > OpenTRV-dev mailing list
> > > OpenTRV-dev at lists.opentrv.org.uk
> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/00b08fd0/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Wed, 16 Dec 2015 11:06:55 +0000
> > From: Damon Hart-Davis <dhd at exnet.com>
> > To: Closed list for developer discussions
> >         <opentrv-dev at lists.opentrv.org.uk>
> > Subject: Re: [OpenTRV-dev] OpenTRV boards
> > Message-ID: <9967F866-84F1-4C78-B117-143FB181DE78 at exnet.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > Hi,
> >
> > > What I'm particulary interested in is integration with open energy
> > monitor. That's why I would like to ask if there's a possibility to get a
> > hold of a couple of boards to do some testing / development on. Also any
> > links to ongoing discussion on these integration might be useful.
> >
> > On this part, there is discussion in here, and there is an OEM/OpenTRV
> > hackathon scheduled for 18th February at the BCS HQ in London.
> >
> > This is clearly not the only integration that OpenTRV should be doing,
> but
> > it is an important one and it?s frustrating to me that we have not
> already
> > gotten further!
> >
> > Rgds
> >
> > Damon
> >
> >
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Wed, 16 Dec 2015 11:07:04 +0000
> > From: Damon Hart-Davis <dhd at exnet.com>
> > To: Closed list for developer discussions
> >         <opentrv-dev at lists.opentrv.org.uk>
> > Subject: Re: [OpenTRV-dev] OpenTRV boards
> > Message-ID: <F3A59E46-D4C0-4289-AD1F-198D697C2B9E at exnet.com>
> > Content-Type: text/plain
> >
> >
> >
> > ------------------------------
> >
> > Message: 7
> > Date: Wed, 16 Dec 2015 12:09:37 +0100
> > From: Bo Herrmannsen <bo.herrmannsen at gmail.com>
> > To: Closed list for developer discussions
> >         <opentrv-dev at lists.opentrv.org.uk>
> > Subject: Re: [OpenTRV-dev] OpenTRV boards
> > Message-ID:
> >         <
> > CAFqpYu64SBmLXpjW-of5a1t+FTWnALqZ364xDQOa4+XmmzYANA at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > This is also why i argue that we should take the cost of 2 so he can get
> > going
> >
> > OEM is always busy and i doubt that the hackahon bring us what we want...
> >
> > 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
> >
> > > Hi,
> > >
> > > > What I'm particulary interested in is integration with open energy
> > > monitor. That's why I would like to ask if there's a possibility to
> get a
> > > hold of a couple of boards to do some testing / development on. Also
> any
> > > links to ongoing discussion on these integration might be useful.
> > >
> > > On this part, there is discussion in here, and there is an OEM/OpenTRV
> > > hackathon scheduled for 18th February at the BCS HQ in London.
> > >
> > > This is clearly not the only integration that OpenTRV should be doing,
> > but
> > > it is an important one and it?s frustrating to me that we have not
> > already
> > > gotten further!
> > >
> > > Rgds
> > >
> > > Damon
> > >
> > > _______________________________________________
> > > OpenTRV-dev mailing list
> > > OpenTRV-dev at lists.opentrv.org.uk
> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/7bf6244e/attachment.html
> > >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > OpenTRV-dev mailing list
> > OpenTRV-dev at lists.opentrv.org.uk
> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
> >
> >
> > ------------------------------
> >
> > End of OpenTRV-dev Digest, Vol 34, Issue 4
> > ******************************************
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/3096ae38/attachment.html
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
> ------------------------------
>
> End of OpenTRV-dev Digest, Vol 34, Issue 5
> ******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/172cad5a/attachment-0001.html>