[OpenTRV-dev] OpenTRV-dev Digest, Vol 34, Issue 5

Bo Herrmannsen bo.herrmannsen at gmail.com
Wed Dec 16 12:15:24 GMT 2015 

just simple on/off

:-(

but if you know what commands to send it should be easy for a software man
to change :-D

2015-12-16 13:14 GMT+01:00 Jeroen Peelaerts <jeroen.peelaerts at gmail.com>:

> Also, aside from this project, I was planning to do an ebus interface with
> my Vaillant boiler to read out temperature / control set point.
>
> I see in the presentation that there's a boiler controller. Which bus
> protocol does it use? Or is this just a simple on/off relay?
>
> 2015-12-16 13:09 GMT+01:00 <opentrv-dev-request at lists.opentrv.org.uk>:
>
>> Send OpenTRV-dev mailing list submissions to
>>         opentrv-dev at lists.opentrv.org.uk
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>         http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> or, via email, send a message with subject or body 'help' to
>>         opentrv-dev-request at lists.opentrv.org.uk
>>
>> You can reach the person managing the list at
>>         opentrv-dev-owner at lists.opentrv.org.uk
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of OpenTRV-dev digest..."
>>
>>
>> Today's Topics:
>>
>>    1. Re: OpenTRV-dev Digest, Vol 34, Issue 4 (Jeroen Peelaerts)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 16 Dec 2015 13:09:05 +0100
>> From: Jeroen Peelaerts <jeroen.peelaerts at gmail.com>
>> To: opentrv-dev at lists.opentrv.org.uk
>> Subject: Re: [OpenTRV-dev] OpenTRV-dev Digest, Vol 34, Issue 4
>> Message-ID:
>>         <
>> CAP8zLqfKxAUzgSaUnpZG46+kHyHMnEf-gVyPAAw5Nmcsm4HNDg at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I have no problem to pay for a board or two. Think it would be better to
>> work with the real hardware directly instead of using prototypes on
>> breadboard :)
>>
>> I'm also co organising a bi annual 'Arduino Jam' event here in Belgium in
>> which people team up to work on different projects. I think there might be
>> interest in OpenTrv and once I have the hardware, I'll can propose a
>> project around it (with the intention to contribute the results back to
>> the
>> project).
>>
>> Maybe email me directly to arrange the board delivery?
>>
>> Thanks!
>>
>>
>>
>> 2015-12-16 12:09 GMT+01:00 <opentrv-dev-request at lists.opentrv.org.uk>:
>>
>> > Send OpenTRV-dev mailing list submissions to
>> >         opentrv-dev at lists.opentrv.org.uk
>> >
>> > To subscribe or unsubscribe via the World Wide Web, visit
>> >         http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> > or, via email, send a message with subject or body 'help' to
>> >         opentrv-dev-request at lists.opentrv.org.uk
>> >
>> > You can reach the person managing the list at
>> >         opentrv-dev-owner at lists.opentrv.org.uk
>> >
>> > When replying, please edit your Subject line so it is more specific
>> > than "Re: Contents of OpenTRV-dev digest..."
>> >
>> >
>> > Today's Topics:
>> >
>> >    1. OpenTRV boards (Jeroen Peelaerts)
>> >    2. Re: OpenTRV boards (Damon Hart-Davis)
>> >    3. Re: OpenTRV boards (Bo Herrmannsen)
>> >    4. Re: OpenTRV boards (Bo Herrmannsen)
>> >    5. Re: OpenTRV boards (Damon Hart-Davis)
>> >    6. Re: OpenTRV boards (Damon Hart-Davis)
>> >    7. Re: OpenTRV boards (Bo Herrmannsen)
>> >
>> >
>> > ----------------------------------------------------------------------
>> >
>> > Message: 1
>> > Date: Wed, 16 Dec 2015 10:59:56 +0100
>> > From: Jeroen Peelaerts <jeroen.peelaerts at gmail.com>
>> > To: opentrv-dev at lists.opentrv.org.uk
>> > Subject: [OpenTRV-dev] OpenTRV boards
>> > Message-ID:
>> >         <CAP8zLqdq18J-f3ABgc2jaCvavC5oo3LbKZRNpcb+S=
>> > qXdhA7ng at mail.gmail.com>
>> > Content-Type: text/plain; charset="utf-8"
>> >
>> > Hello all,
>> >
>> > Glad to see my subscription was accepted. I came across opentrv while
>> > looking for an opensource trv system for my home. Good thing is that I
>> > don't need to start from scratch now as I can focus to make some
>> > contributions to this project instead.
>> >
>> > What I'm particulary interested in is integration with open energy
>> monitor.
>> > That's why I would like to ask if there's a possibility to get a hold
>> of a
>> > couple of boards to do some testing / development on. Also any links to
>> > ongoing discussion on these integration might be useful.
>> >
>> > Also would be nice to have some boards available for early adopters or
>> > contributors to help the project move forward. If anyone can help me on
>> > this one, then drop me a line.
>> >
>> > Thanks in advance,
>> >
>> > Jeroen.
>> > -------------- next part --------------
>> > An HTML attachment was scrubbed...
>> > URL: <
>> >
>> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/7d7ecd25/attachment-0001.html
>> > >
>> >
>> > ------------------------------
>> >
>> > Message: 2
>> > Date: Wed, 16 Dec 2015 10:35:45 +0000
>> > From: Damon Hart-Davis <dhd at exnet.com>
>> > To: Closed list for developer discussions
>> >         <opentrv-dev at lists.opentrv.org.uk>
>> > Subject: Re: [OpenTRV-dev] OpenTRV boards
>> > Message-ID: <5CFAA969-4E98-4892-BFB6-52BBA04C47DE at exnet.com>
>> > Content-Type: text/plain; charset=utf-8
>> >
>> > Hi,
>> >
>> > At the moment we are trying to get some manufacturing done very fast to
>> > support trials in social housing for this heating season.
>> >
>> > So the well is a bit try on boards at the moment though we do have a few
>> > REV2 kits available (?25+VAT) and putting a minimal system together on
>> > breadboard is not that tricky (we have configs to support that) to get
>> > going.
>> >
>> > Does any of that help?
>> >
>> > Rgds
>> >
>> > Damon
>> >
>> >
>> > > On 16 Dec 2015, at 09:59, Jeroen Peelaerts <
>> jeroen.peelaerts at gmail.com>
>> > wrote:
>> > >
>> > > Hello all,
>> > >
>> > > Glad to see my subscription was accepted. I came across opentrv while
>> > looking for an opensource trv system for my home. Good thing is that I
>> > don't need to start from scratch now as I can focus to make some
>> > contributions to this project instead.
>> > >
>> > > What I'm particulary interested in is integration with open energy
>> > monitor. That's why I would like to ask if there's a possibility to get
>> a
>> > hold of a couple of boards to do some testing / development on. Also any
>> > links to ongoing discussion on these integration might be useful.
>> > >
>> > > Also would be nice to have some boards available for early adopters or
>> > contributors to help the project move forward. If anyone can help me on
>> > this one, then drop me a line.
>> > >
>> > > Thanks in advance,
>> > >
>> > > Jeroen.
>> > >
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > OpenTRV-dev mailing list
>> > > OpenTRV-dev at lists.opentrv.org.uk
>> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> >
>> >
>> >
>> > ------------------------------
>> >
>> > Message: 3
>> > Date: Wed, 16 Dec 2015 11:46:40 +0100
>> > From: Bo Herrmannsen <bo.herrmannsen at gmail.com>
>> > To: Closed list for developer discussions
>> >         <opentrv-dev at lists.opentrv.org.uk>
>> > Subject: Re: [OpenTRV-dev] OpenTRV boards
>> > Message-ID:
>> >         <CAFqpYu5raRrd5LvGOejBybgs0swCDc9kGhxO7Ui6Gy+zTY=
>> > seg at mail.gmail.com>
>> > Content-Type: text/plain; charset="utf-8"
>> >
>> > found it... goggle marked as spam. so it was binned
>> >
>> > 2015-12-16 11:35 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>> >
>> > > Hi,
>> > >
>> > > At the moment we are trying to get some manufacturing done very fast
>> to
>> > > support trials in social housing for this heating season.
>> > >
>> > > So the well is a bit try on boards at the moment though we do have a
>> few
>> > > REV2 kits available (?25+VAT) and putting a minimal system together on
>> > > breadboard is not that tricky (we have configs to support that) to get
>> > > going.
>> > >
>> > > Does any of that help?
>> > >
>> > > Rgds
>> > >
>> > > Damon
>> > >
>> > >
>> > > > On 16 Dec 2015, at 09:59, Jeroen Peelaerts <
>> jeroen.peelaerts at gmail.com
>> > >
>> > > wrote:
>> > > >
>> > > > Hello all,
>> > > >
>> > > > Glad to see my subscription was accepted. I came across opentrv
>> while
>> > > looking for an opensource trv system for my home. Good thing is that I
>> > > don't need to start from scratch now as I can focus to make some
>> > > contributions to this project instead.
>> > > >
>> > > > What I'm particulary interested in is integration with open energy
>> > > monitor. That's why I would like to ask if there's a possibility to
>> get a
>> > > hold of a couple of boards to do some testing / development on. Also
>> any
>> > > links to ongoing discussion on these integration might be useful.
>> > > >
>> > > > Also would be nice to have some boards available for early adopters
>> or
>> > > contributors to help the project move forward. If anyone can help me
>> on
>> > > this one, then drop me a line.
>> > > >
>> > > > Thanks in advance,
>> > > >
>> > > > Jeroen.
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > _______________________________________________
>> > > > OpenTRV-dev mailing list
>> > > > OpenTRV-dev at lists.opentrv.org.uk
>> > > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> > >
>> > > _______________________________________________
>> > > OpenTRV-dev mailing list
>> > > OpenTRV-dev at lists.opentrv.org.uk
>> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> > >
>> > -------------- next part --------------
>> > An HTML attachment was scrubbed...
>> > URL: <
>> >
>> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/3151cb7f/attachment-0001.html
>> > >
>> >
>> > ------------------------------
>> >
>> > Message: 4
>> > Date: Wed, 16 Dec 2015 11:54:24 +0100
>> > From: Bo Herrmannsen <bo.herrmannsen at gmail.com>
>> > To: Closed list for developer discussions
>> >         <opentrv-dev at lists.opentrv.org.uk>
>> > Subject: Re: [OpenTRV-dev] OpenTRV boards
>> > Message-ID:
>> >         <CAFqpYu7DhAx2UJpWD0D4Xo59o=eDvEQS2QcsPnAJ3JtxEk=
>> > SZQ at mail.gmail.com>
>> > Content-Type: text/plain; charset="utf-8"
>> >
>> > if that integration works comes back to the project (openTRV) could we
>> not
>> > argue that we could send 1 max 2 ?
>> >
>> >
>> > if not much mistaken then the goal here is to get data from the units
>> and
>> > control back
>> >
>> > 2015-12-16 11:35 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>> >
>> > > Hi,
>> > >
>> > > At the moment we are trying to get some manufacturing done very fast
>> to
>> > > support trials in social housing for this heating season.
>> > >
>> > > So the well is a bit try on boards at the moment though we do have a
>> few
>> > > REV2 kits available (?25+VAT) and putting a minimal system together on
>> > > breadboard is not that tricky (we have configs to support that) to get
>> > > going.
>> > >
>> > > Does any of that help?
>> > >
>> > > Rgds
>> > >
>> > > Damon
>> > >
>> > >
>> > > > On 16 Dec 2015, at 09:59, Jeroen Peelaerts <
>> jeroen.peelaerts at gmail.com
>> > >
>> > > wrote:
>> > > >
>> > > > Hello all,
>> > > >
>> > > > Glad to see my subscription was accepted. I came across opentrv
>> while
>> > > looking for an opensource trv system for my home. Good thing is that I
>> > > don't need to start from scratch now as I can focus to make some
>> > > contributions to this project instead.
>> > > >
>> > > > What I'm particulary interested in is integration with open energy
>> > > monitor. That's why I would like to ask if there's a possibility to
>> get a
>> > > hold of a couple of boards to do some testing / development on. Also
>> any
>> > > links to ongoing discussion on these integration might be useful.
>> > > >
>> > > > Also would be nice to have some boards available for early adopters
>> or
>> > > contributors to help the project move forward. If anyone can help me
>> on
>> > > this one, then drop me a line.
>> > > >
>> > > > Thanks in advance,
>> > > >
>> > > > Jeroen.
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > _______________________________________________
>> > > > OpenTRV-dev mailing list
>> > > > OpenTRV-dev at lists.opentrv.org.uk
>> > > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> > >
>> > > _______________________________________________
>> > > OpenTRV-dev mailing list
>> > > OpenTRV-dev at lists.opentrv.org.uk
>> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> > >
>> > -------------- next part --------------
>> > An HTML attachment was scrubbed...
>> > URL: <
>> >
>> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/00b08fd0/attachment-0001.html
>> > >
>> >
>> > ------------------------------
>> >
>> > Message: 5
>> > Date: Wed, 16 Dec 2015 11:06:55 +0000
>> > From: Damon Hart-Davis <dhd at exnet.com>
>> > To: Closed list for developer discussions
>> >         <opentrv-dev at lists.opentrv.org.uk>
>> > Subject: Re: [OpenTRV-dev] OpenTRV boards
>> > Message-ID: <9967F866-84F1-4C78-B117-143FB181DE78 at exnet.com>
>> > Content-Type: text/plain; charset=utf-8
>> >
>> > Hi,
>> >
>> > > What I'm particulary interested in is integration with open energy
>> > monitor. That's why I would like to ask if there's a possibility to get
>> a
>> > hold of a couple of boards to do some testing / development on. Also any
>> > links to ongoing discussion on these integration might be useful.
>> >
>> > On this part, there is discussion in here, and there is an OEM/OpenTRV
>> > hackathon scheduled for 18th February at the BCS HQ in London.
>> >
>> > This is clearly not the only integration that OpenTRV should be doing,
>> but
>> > it is an important one and it?s frustrating to me that we have not
>> already
>> > gotten further!
>> >
>> > Rgds
>> >
>> > Damon
>> >
>> >
>> >
>> > ------------------------------
>> >
>> > Message: 6
>> > Date: Wed, 16 Dec 2015 11:07:04 +0000
>> > From: Damon Hart-Davis <dhd at exnet.com>
>> > To: Closed list for developer discussions
>> >         <opentrv-dev at lists.opentrv.org.uk>
>> > Subject: Re: [OpenTRV-dev] OpenTRV boards
>> > Message-ID: <F3A59E46-D4C0-4289-AD1F-198D697C2B9E at exnet.com>
>> > Content-Type: text/plain
>> >
>> >
>> >
>> > ------------------------------
>> >
>> > Message: 7
>> > Date: Wed, 16 Dec 2015 12:09:37 +0100
>> > From: Bo Herrmannsen <bo.herrmannsen at gmail.com>
>> > To: Closed list for developer discussions
>> >         <opentrv-dev at lists.opentrv.org.uk>
>> > Subject: Re: [OpenTRV-dev] OpenTRV boards
>> > Message-ID:
>> >         <
>> > CAFqpYu64SBmLXpjW-of5a1t+FTWnALqZ364xDQOa4+XmmzYANA at mail.gmail.com>
>> > Content-Type: text/plain; charset="utf-8"
>> >
>> > This is also why i argue that we should take the cost of 2 so he can get
>> > going
>> >
>> > OEM is always busy and i doubt that the hackahon bring us what we
>> want...
>> >
>> > 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>> >
>> > > Hi,
>> > >
>> > > > What I'm particulary interested in is integration with open energy
>> > > monitor. That's why I would like to ask if there's a possibility to
>> get a
>> > > hold of a couple of boards to do some testing / development on. Also
>> any
>> > > links to ongoing discussion on these integration might be useful.
>> > >
>> > > On this part, there is discussion in here, and there is an OEM/OpenTRV
>> > > hackathon scheduled for 18th February at the BCS HQ in London.
>> > >
>> > > This is clearly not the only integration that OpenTRV should be doing,
>> > but
>> > > it is an important one and it?s frustrating to me that we have not
>> > already
>> > > gotten further!
>> > >
>> > > Rgds
>> > >
>> > > Damon
>> > >
>> > > _______________________________________________
>> > > OpenTRV-dev mailing list
>> > > OpenTRV-dev at lists.opentrv.org.uk
>> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> > >
>> > -------------- next part --------------
>> > An HTML attachment was scrubbed...
>> > URL: <
>> >
>> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/7bf6244e/attachment.html
>> > >
>> >
>> > ------------------------------
>> >
>> > Subject: Digest Footer
>> >
>> > _______________________________________________
>> > OpenTRV-dev mailing list
>> > OpenTRV-dev at lists.opentrv.org.uk
>> > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> >
>> >
>> > ------------------------------
>> >
>> > End of OpenTRV-dev Digest, Vol 34, Issue 4
>> > ******************************************
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/3096ae38/attachment.html
>> >
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>> ------------------------------
>>
>> End of OpenTRV-dev Digest, Vol 34, Issue 5
>> ******************************************
>>
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/afc1de65/attachment-0001.html>

More information about the OpenTRV-dev mailing list