[OpenTRV-dev] OpenTRV boards

[Jeremy Poulter]

Node-RED? I think it was a while but IIRC there was at least a sign of it
doing something.

Jeremy


On 16 December 2015 at 20:39, Bo Herrmannsen <bo.herrmannsen at gmail.com>
wrote:

> hehe.... a over night install....
>
> or how long should the install take?
>
> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>
>> oki doke...
>>
>> on it.... i'm just eager to get room temps looged so i can compare
>> outside to inside temp and how much heat i suck from the district heating
>>
>> on top the building *society
>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>> rent my flat from replaces all windows and external doors with better
>> onces... the current ones are as good as the fly net in a tent*
>>
>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>
>>> Correct, that is the instructions I used on a RPi B.
>>>
>>> Jeremy
>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <bo.herrmannsen at gmail.com> wrote:
>>>
>>>> would this page make do for installing node red?
>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>
>>>> in my case a ras pi 1... so about half way down.... not on the jessie
>>>> image
>>>>
>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>
>>>>> One is the input and the other is the output, both go to the same
>>>>> physical serial port.
>>>>>
>>>>> Jeremy
>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> looking at the flow picture....
>>>>>>
>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>
>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I certainly have the data going from OpenTRV to EmonCMS (see the post OpenTRV,
>>>>>>> EmonCMS and Node-RED
>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>
>>>>>>> With regard to the back channel I do not believe that the EmonCMS
>>>>>>> architecture has been built to accommodate this. It is only really for data
>>>>>>> storage/analyses. So I think you need something else for the control side
>>>>>>> of things.  Have a look at;
>>>>>>>  -
>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>  -
>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>
>>>>>>> Jeremy
>>>>>>>
>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>
>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>
>>>>>>>> and so would i... but i could live with just getting the data in to
>>>>>>>> emoncms... for which i have all the hardware but lacking the software
>>>>>>>>
>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>
>>>>>>>>> I guess the biggest question is what do you want from an
>>>>>>>>> integration with OEM? Are we talking about just getting data in to EmonCMS?
>>>>>>>>> Do you want the OpenTRV radio link to directly talk with an EmonBase?
>>>>>>>>> Something in between?
>>>>>>>>>
>>>>>>>>> Jeremy
>>>>>>>>>
>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> This is also why i argue that we should take the cost of 2 so he
>>>>>>>>>> can get going
>>>>>>>>>>
>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring us what we
>>>>>>>>>> want...
>>>>>>>>>>
>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> > What I'm particulary interested in is integration with open
>>>>>>>>>>> energy monitor. That's why I would like to ask if there's a possibility to
>>>>>>>>>>> get a hold of a couple of boards to do some testing / development on. Also
>>>>>>>>>>> any links to ongoing discussion on these integration might be useful.
>>>>>>>>>>>
>>>>>>>>>>> On this part, there is discussion in here, and there is an
>>>>>>>>>>> OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in London.
>>>>>>>>>>>
>>>>>>>>>>> This is clearly not the only integration that OpenTRV should be
>>>>>>>>>>> doing, but it is an important one and it’s frustrating to me that we have
>>>>>>>>>>> not already gotten further!
>>>>>>>>>>>
>>>>>>>>>>> Rgds
>>>>>>>>>>>
>>>>>>>>>>> Damon
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/122423c8/attachment.html>