[OpenTRV-dev] OpenTRV boards

[Bo Herrmannsen]

yep there was a | spinning...

but installed now... setting it up to start at boot

tomorrow the fun begins with setting up the flow.... how much of your flow
can i reuse?

2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> Node-RED? I think it was a while but IIRC there was at least a sign of it
> doing something.
>
> Jeremy
>
>
> On 16 December 2015 at 20:39, Bo Herrmannsen <bo.herrmannsen at gmail.com>
> wrote:
>
>> hehe.... a over night install....
>>
>> or how long should the install take?
>>
>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>
>>> oki doke...
>>>
>>> on it.... i'm just eager to get room temps looged so i can compare
>>> outside to inside temp and how much heat i suck from the district heating
>>>
>>> on top the building *society
>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>> rent my flat from replaces all windows and external doors with better
>>> onces... the current ones are as good as the fly net in a tent*
>>>
>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>
>>>> Correct, that is the instructions I used on a RPi B.
>>>>
>>>> Jeremy
>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>> wrote:
>>>>
>>>>> would this page make do for installing node red?
>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>
>>>>> in my case a ras pi 1... so about half way down.... not on the jessie
>>>>> image
>>>>>
>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>
>>>>>> One is the input and the other is the output, both go to the same
>>>>>> physical serial port.
>>>>>>
>>>>>> Jeremy
>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> looking at the flow picture....
>>>>>>>
>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>
>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS (see the
>>>>>>>> post OpenTRV, EmonCMS and Node-RED
>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>
>>>>>>>> With regard to the back channel I do not believe that the EmonCMS
>>>>>>>> architecture has been built to accommodate this. It is only really for data
>>>>>>>> storage/analyses. So I think you need something else for the control side
>>>>>>>> of things.  Have a look at;
>>>>>>>>  -
>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>  -
>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>
>>>>>>>> Jeremy
>>>>>>>>
>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>
>>>>>>>>> and so would i... but i could live with just getting the data in
>>>>>>>>> to emoncms... for which i have all the hardware but lacking the software
>>>>>>>>>
>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>
>>>>>>>>>> I guess the biggest question is what do you want from an
>>>>>>>>>> integration with OEM? Are we talking about just getting data in to EmonCMS?
>>>>>>>>>> Do you want the OpenTRV radio link to directly talk with an EmonBase?
>>>>>>>>>> Something in between?
>>>>>>>>>>
>>>>>>>>>> Jeremy
>>>>>>>>>>
>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> This is also why i argue that we should take the cost of 2 so he
>>>>>>>>>>> can get going
>>>>>>>>>>>
>>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring us what
>>>>>>>>>>> we want...
>>>>>>>>>>>
>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> > What I'm particulary interested in is integration with open
>>>>>>>>>>>> energy monitor. That's why I would like to ask if there's a possibility to
>>>>>>>>>>>> get a hold of a couple of boards to do some testing / development on. Also
>>>>>>>>>>>> any links to ongoing discussion on these integration might be useful.
>>>>>>>>>>>>
>>>>>>>>>>>> On this part, there is discussion in here, and there is an
>>>>>>>>>>>> OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in London.
>>>>>>>>>>>>
>>>>>>>>>>>> This is clearly not the only integration that OpenTRV should be
>>>>>>>>>>>> doing, but it is an important one and it’s frustrating to me that we have
>>>>>>>>>>>> not already gotten further!
>>>>>>>>>>>>
>>>>>>>>>>>> Rgds
>>>>>>>>>>>>
>>>>>>>>>>>> Damon
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/dd6ab488/attachment-0001.html>