[OpenTRV-dev] OpenTRV boards

[Jeremy Poulter]

All of it should basically be reusable, should just be the serial port and
emoncms server setup that needs changing (and I hope those are not in the
code I shared ;-)

Feel free to IM me via Hangouts or I can jump or the IRC tomorrow and we
can go through the process together, that should help with my documentation.

Jeremy

On 16 December 2015 at 23:05, Bo Herrmannsen <bo.herrmannsen at gmail.com>
wrote:

> yep there was a | spinning...
>
> but installed now... setting it up to start at boot
>
> tomorrow the fun begins with setting up the flow.... how much of your flow
> can i reuse?
>
> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>
>> Node-RED? I think it was a while but IIRC there was at least a sign of it
>> doing something.
>>
>> Jeremy
>>
>>
>> On 16 December 2015 at 20:39, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>> wrote:
>>
>>> hehe.... a over night install....
>>>
>>> or how long should the install take?
>>>
>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>
>>>> oki doke...
>>>>
>>>> on it.... i'm just eager to get room temps looged so i can compare
>>>> outside to inside temp and how much heat i suck from the district heating
>>>>
>>>> on top the building *society
>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>> rent my flat from replaces all windows and external doors with better
>>>> onces... the current ones are as good as the fly net in a tent*
>>>>
>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>
>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>
>>>>> Jeremy
>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> would this page make do for installing node red?
>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>
>>>>>> in my case a ras pi 1... so about half way down.... not on the jessie
>>>>>> image
>>>>>>
>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>
>>>>>>> One is the input and the other is the output, both go to the same
>>>>>>> physical serial port.
>>>>>>>
>>>>>>> Jeremy
>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> looking at the flow picture....
>>>>>>>>
>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>
>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS (see the
>>>>>>>>> post OpenTRV, EmonCMS and Node-RED
>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>
>>>>>>>>> With regard to the back channel I do not believe that the EmonCMS
>>>>>>>>> architecture has been built to accommodate this. It is only really for data
>>>>>>>>> storage/analyses. So I think you need something else for the control side
>>>>>>>>> of things.  Have a look at;
>>>>>>>>>  -
>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>  -
>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>
>>>>>>>>> Jeremy
>>>>>>>>>
>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>
>>>>>>>>>> and so would i... but i could live with just getting the data in
>>>>>>>>>> to emoncms... for which i have all the hardware but lacking the software
>>>>>>>>>>
>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>>
>>>>>>>>>>> I guess the biggest question is what do you want from an
>>>>>>>>>>> integration with OEM? Are we talking about just getting data in to EmonCMS?
>>>>>>>>>>> Do you want the OpenTRV radio link to directly talk with an EmonBase?
>>>>>>>>>>> Something in between?
>>>>>>>>>>>
>>>>>>>>>>> Jeremy
>>>>>>>>>>>
>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> This is also why i argue that we should take the cost of 2 so
>>>>>>>>>>>> he can get going
>>>>>>>>>>>>
>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring us what
>>>>>>>>>>>> we want...
>>>>>>>>>>>>
>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> > What I'm particulary interested in is integration with open
>>>>>>>>>>>>> energy monitor. That's why I would like to ask if there's a possibility to
>>>>>>>>>>>>> get a hold of a couple of boards to do some testing / development on. Also
>>>>>>>>>>>>> any links to ongoing discussion on these integration might be useful.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On this part, there is discussion in here, and there is an
>>>>>>>>>>>>> OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in London.
>>>>>>>>>>>>>
>>>>>>>>>>>>> This is clearly not the only integration that OpenTRV should
>>>>>>>>>>>>> be doing, but it is an important one and it’s frustrating to me that we
>>>>>>>>>>>>> have not already gotten further!
>>>>>>>>>>>>>
>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>
>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151216/b5b15bed/attachment.html>