[OpenTRV-dev] OpenTRV boards

Thu Dec 17 00:02:39 GMT 2015

which of the 2 json files should i pick? are they both part of the same
workflow?

think it will be a nice project while i have breakfast... but so far it has
been a smooth ride... the link i gave for install did the trick... thou i
had to skip some of it and read carefull a few places

install node red... the only issue i had was it seemed to frezze at some
point... i simply did a ctrl+c and restarted the install...

2015-12-17 0:31 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> All of it should basically be reusable, should just be the serial port and
> emoncms server setup that needs changing (and I hope those are not in the
> code I shared ;-)
>
> Feel free to IM me via Hangouts or I can jump or the IRC tomorrow and we
> can go through the process together, that should help with my documentation.
>
> Jeremy
>
> On 16 December 2015 at 23:05, Bo Herrmannsen <bo.herrmannsen at gmail.com>
> wrote:
>
>> yep there was a | spinning...
>>
>> but installed now... setting it up to start at boot
>>
>> tomorrow the fun begins with setting up the flow.... how much of your
>> flow can i reuse?
>>
>> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>
>>> Node-RED? I think it was a while but IIRC there was at least a sign of
>>> it doing something.
>>>
>>> Jeremy
>>>
>>>
>>> On 16 December 2015 at 20:39, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>>> wrote:
>>>
>>>> hehe.... a over night install....
>>>>
>>>> or how long should the install take?
>>>>
>>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>>
>>>>> oki doke...
>>>>>
>>>>> on it.... i'm just eager to get room temps looged so i can compare
>>>>> outside to inside temp and how much heat i suck from the district heating
>>>>>
>>>>> on top the building *society
>>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>>> rent my flat from replaces all windows and external doors with better
>>>>> onces... the current ones are as good as the fly net in a tent*
>>>>>
>>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>
>>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>>
>>>>>> Jeremy
>>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> would this page make do for installing node red?
>>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>>
>>>>>>> in my case a ras pi 1... so about half way down.... not on the
>>>>>>> jessie image
>>>>>>>
>>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>
>>>>>>>> One is the input and the other is the output, both go to the same
>>>>>>>> physical serial port.
>>>>>>>>
>>>>>>>> Jeremy
>>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> looking at the flow picture....
>>>>>>>>>
>>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>>
>>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS (see the
>>>>>>>>>> post OpenTRV, EmonCMS and Node-RED
>>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>>
>>>>>>>>>> With regard to the back channel I do not believe that the EmonCMS
>>>>>>>>>> architecture has been built to accommodate this. It is only really for data
>>>>>>>>>> storage/analyses. So I think you need something else for the control side
>>>>>>>>>> of things.  Have a look at;
>>>>>>>>>>  -
>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>>  -
>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>>
>>>>>>>>>> Jeremy
>>>>>>>>>>
>>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>>
>>>>>>>>>>> and so would i... but i could live with just getting the data in
>>>>>>>>>>> to emoncms... for which i have all the hardware but lacking the software
>>>>>>>>>>>
>>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>
>>>>>>>>>>> :
>>>>>>>>>>>
>>>>>>>>>>>> I guess the biggest question is what do you want from an
>>>>>>>>>>>> integration with OEM? Are we talking about just getting data in to EmonCMS?
>>>>>>>>>>>> Do you want the OpenTRV radio link to directly talk with an EmonBase?
>>>>>>>>>>>> Something in between?
>>>>>>>>>>>>
>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>
>>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> This is also why i argue that we should take the cost of 2 so
>>>>>>>>>>>>> he can get going
>>>>>>>>>>>>>
>>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring us what
>>>>>>>>>>>>> we want...
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> > What I'm particulary interested in is integration with open
>>>>>>>>>>>>>> energy monitor. That's why I would like to ask if there's a possibility to
>>>>>>>>>>>>>> get a hold of a couple of boards to do some testing / development on. Also
>>>>>>>>>>>>>> any links to ongoing discussion on these integration might be useful.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On this part, there is discussion in here, and there is an
>>>>>>>>>>>>>> OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in London.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This is clearly not the only integration that OpenTRV should
>>>>>>>>>>>>>> be doing, but it is an important one and it’s frustrating to me that we
>>>>>>>>>>>>>> have not already gotten further!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/f82a5232/attachment-0001.html>