[OpenTRV-dev] OpenTRV boards

Thu Dec 17 10:20:34 GMT 2015

about the setup

we use the same usb port config so i guess there is no need to change
that...

are there other things i need to change?

2015-12-17 11:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> Yes, you probably need to restart. If you followed the instructions on the
> Node-RED site it should be;
>
>   pm2 restart node-red
>
> Jeremy
>
> On 17 December 2015 at 09:57, Bo Herrmannsen <bo.herrmannsen at gmail.com>
> wrote:
>
>> that was install.... i guess i have to restart node-red before it is
>> loaded?
>>
>> if so what is the right command here? sudo service ***** restart or
>> something else?
>>
>> 2015-12-17 10:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>
>>> The TCP Server flow is a sub flow that provides the 'telnet' access
>>> directly to the serial port, allowing some form of remote control although
>>> only really intended for debugging. the snapshot you sent it looks like
>>> this has been loaded ok anyway.
>>>
>>> The EmonCMS stuff is an extra step you need to do after the node-RED
>>> install, see
>>> http://openenergymonitor.blogspot.co.uk/2015/11/node-red-emoncms-node.html
>>>
>>> Jeremy
>>>
>>> On 17 December 2015 at 00:10, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>>> wrote:
>>>
>>>> imported the opentrv.json
>>>>
>>>> http://imgur.com/uFypiO3
>>>>
>>>> it says that emoncms is not recognized/known... but i guess there is a
>>>> fix for that
>>>>
>>>> should the TCP server also be imported... and if so how?
>>>>
>>>> 2015-12-17 0:31 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>
>>>>> All of it should basically be reusable, should just be the serial port
>>>>> and emoncms server setup that needs changing (and I hope those are not in
>>>>> the code I shared ;-)
>>>>>
>>>>> Feel free to IM me via Hangouts or I can jump or the IRC tomorrow and
>>>>> we can go through the process together, that should help with my
>>>>> documentation.
>>>>>
>>>>> Jeremy
>>>>>
>>>>> On 16 December 2015 at 23:05, Bo Herrmannsen <bo.herrmannsen at gmail.com
>>>>> > wrote:
>>>>>
>>>>>> yep there was a | spinning...
>>>>>>
>>>>>> but installed now... setting it up to start at boot
>>>>>>
>>>>>> tomorrow the fun begins with setting up the flow.... how much of your
>>>>>> flow can i reuse?
>>>>>>
>>>>>> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>
>>>>>>> Node-RED? I think it was a while but IIRC there was at least a sign
>>>>>>> of it doing something.
>>>>>>>
>>>>>>> Jeremy
>>>>>>>
>>>>>>>
>>>>>>> On 16 December 2015 at 20:39, Bo Herrmannsen <
>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>
>>>>>>>> hehe.... a over night install....
>>>>>>>>
>>>>>>>> or how long should the install take?
>>>>>>>>
>>>>>>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com
>>>>>>>> >:
>>>>>>>>
>>>>>>>>> oki doke...
>>>>>>>>>
>>>>>>>>> on it.... i'm just eager to get room temps looged so i can compare
>>>>>>>>> outside to inside temp and how much heat i suck from the district heating
>>>>>>>>>
>>>>>>>>> on top the building *society
>>>>>>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>>>>>>> rent my flat from replaces all windows and external doors with better
>>>>>>>>> onces... the current ones are as good as the fly net in a tent*
>>>>>>>>>
>>>>>>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>
>>>>>>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>>>>>>
>>>>>>>>>> Jeremy
>>>>>>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <bo.herrmannsen at gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> would this page make do for installing node red?
>>>>>>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>>>>>>
>>>>>>>>>>> in my case a ras pi 1... so about half way down.... not on the
>>>>>>>>>>> jessie image
>>>>>>>>>>>
>>>>>>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>
>>>>>>>>>>> :
>>>>>>>>>>>
>>>>>>>>>>>> One is the input and the other is the output, both go to the
>>>>>>>>>>>> same physical serial port.
>>>>>>>>>>>>
>>>>>>>>>>>> Jeremy
>>>>>>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <
>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> looking at the flow picture....
>>>>>>>>>>>>>
>>>>>>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS (see
>>>>>>>>>>>>>> the post OpenTRV, EmonCMS and Node-RED
>>>>>>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> With regard to the back channel I do not believe that the
>>>>>>>>>>>>>> EmonCMS architecture has been built to accommodate this. It is only really
>>>>>>>>>>>>>> for data storage/analyses. So I think you need something else for the
>>>>>>>>>>>>>> control side of things.  Have a look at;
>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> and so would i... but i could live with just getting the
>>>>>>>>>>>>>>> data in to emoncms... for which i have all the hardware but lacking the
>>>>>>>>>>>>>>> software
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I guess the biggest question is what do you want from an
>>>>>>>>>>>>>>>> integration with OEM? Are we talking about just getting data in to EmonCMS?
>>>>>>>>>>>>>>>> Do you want the OpenTRV radio link to directly talk with an EmonBase?
>>>>>>>>>>>>>>>> Something in between?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> This is also why i argue that we should take the cost of 2
>>>>>>>>>>>>>>>>> so he can get going
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring us
>>>>>>>>>>>>>>>>> what we want...
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <dhd at exnet.com
>>>>>>>>>>>>>>>>> >:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> > What I'm particulary interested in is integration with
>>>>>>>>>>>>>>>>>> open energy monitor. That's why I would like to ask if there's a
>>>>>>>>>>>>>>>>>> possibility to get a hold of a couple of boards to do some testing /
>>>>>>>>>>>>>>>>>> development on. Also any links to ongoing discussion on these integration
>>>>>>>>>>>>>>>>>> might be useful.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On this part, there is discussion in here, and there is
>>>>>>>>>>>>>>>>>> an OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in
>>>>>>>>>>>>>>>>>> London.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This is clearly not the only integration that OpenTRV
>>>>>>>>>>>>>>>>>> should be doing, but it is an important one and it’s frustrating to me that
>>>>>>>>>>>>>>>>>> we have not already gotten further!
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/456a2b25/attachment-0001.html>