[OpenTRV-dev] OpenTRV boards

[Jeremy Poulter]

No, just the base directory;

[image: Inline images 2]

Jeremy

On 17 December 2015 at 10:29, Bo Herrmannsen <bo.herrmannsen at gmail.com>
wrote:

> i have some scripts that i use to import solar data from a rooftop
> installed panel....
>
> 'http://127.0.0.1/emoncms/input/post?apikey
>
> so i change emoncms.org to match up .... but should i include input/post
> or does the module add that?
>
> 2015-12-17 11:22 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>
>> i see you both have emonbase and emoncms...
>>
>> since i only store data local i guess i can delete emonbase?
>>
>> 2015-12-17 11:20 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>
>>> about the setup
>>>
>>> we use the same usb port config so i guess there is no need to change
>>> that...
>>>
>>> are there other things i need to change?
>>>
>>> 2015-12-17 11:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>
>>>> Yes, you probably need to restart. If you followed the instructions on
>>>> the Node-RED site it should be;
>>>>
>>>>   pm2 restart node-red
>>>>
>>>> Jeremy
>>>>
>>>> On 17 December 2015 at 09:57, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>>>> wrote:
>>>>
>>>>> that was install.... i guess i have to restart node-red before it is
>>>>> loaded?
>>>>>
>>>>> if so what is the right command here? sudo service ***** restart or
>>>>> something else?
>>>>>
>>>>> 2015-12-17 10:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>
>>>>>> The TCP Server flow is a sub flow that provides the 'telnet' access
>>>>>> directly to the serial port, allowing some form of remote control although
>>>>>> only really intended for debugging. the snapshot you sent it looks like
>>>>>> this has been loaded ok anyway.
>>>>>>
>>>>>> The EmonCMS stuff is an extra step you need to do after the node-RED
>>>>>> install, see
>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/node-red-emoncms-node.html
>>>>>>
>>>>>> Jeremy
>>>>>>
>>>>>> On 17 December 2015 at 00:10, Bo Herrmannsen <
>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>
>>>>>>> imported the opentrv.json
>>>>>>>
>>>>>>> http://imgur.com/uFypiO3
>>>>>>>
>>>>>>> it says that emoncms is not recognized/known... but i guess there is
>>>>>>> a fix for that
>>>>>>>
>>>>>>> should the TCP server also be imported... and if so how?
>>>>>>>
>>>>>>> 2015-12-17 0:31 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>
>>>>>>>> All of it should basically be reusable, should just be the serial
>>>>>>>> port and emoncms server setup that needs changing (and I hope those are not
>>>>>>>> in the code I shared ;-)
>>>>>>>>
>>>>>>>> Feel free to IM me via Hangouts or I can jump or the IRC tomorrow
>>>>>>>> and we can go through the process together, that should help with my
>>>>>>>> documentation.
>>>>>>>>
>>>>>>>> Jeremy
>>>>>>>>
>>>>>>>> On 16 December 2015 at 23:05, Bo Herrmannsen <
>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> yep there was a | spinning...
>>>>>>>>>
>>>>>>>>> but installed now... setting it up to start at boot
>>>>>>>>>
>>>>>>>>> tomorrow the fun begins with setting up the flow.... how much of
>>>>>>>>> your flow can i reuse?
>>>>>>>>>
>>>>>>>>> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>
>>>>>>>>>> Node-RED? I think it was a while but IIRC there was at least a
>>>>>>>>>> sign of it doing something.
>>>>>>>>>>
>>>>>>>>>> Jeremy
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 16 December 2015 at 20:39, Bo Herrmannsen <
>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> hehe.... a over night install....
>>>>>>>>>>>
>>>>>>>>>>> or how long should the install take?
>>>>>>>>>>>
>>>>>>>>>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <
>>>>>>>>>>> bo.herrmannsen at gmail.com>:
>>>>>>>>>>>
>>>>>>>>>>>> oki doke...
>>>>>>>>>>>>
>>>>>>>>>>>> on it.... i'm just eager to get room temps looged so i can
>>>>>>>>>>>> compare outside to inside temp and how much heat i suck from the district
>>>>>>>>>>>> heating
>>>>>>>>>>>>
>>>>>>>>>>>> on top the building *society
>>>>>>>>>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>>>>>>>>>> rent my flat from replaces all windows and external doors with better
>>>>>>>>>>>> onces... the current ones are as good as the fly net in a tent*
>>>>>>>>>>>>
>>>>>>>>>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net
>>>>>>>>>>>> >:
>>>>>>>>>>>>
>>>>>>>>>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <
>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> would this page make do for installing node red?
>>>>>>>>>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> in my case a ras pi 1... so about half way down.... not on
>>>>>>>>>>>>>> the jessie image
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> One is the input and the other is the output, both go to the
>>>>>>>>>>>>>>> same physical serial port.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <
>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> looking at the flow picture....
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS
>>>>>>>>>>>>>>>>> (see the post OpenTRV, EmonCMS and Node-RED
>>>>>>>>>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> With regard to the back channel I do not believe that the
>>>>>>>>>>>>>>>>> EmonCMS architecture has been built to accommodate this. It is only really
>>>>>>>>>>>>>>>>> for data storage/analyses. So I think you need something else for the
>>>>>>>>>>>>>>>>> control side of things.  Have a look at;
>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> and so would i... but i could live with just getting the
>>>>>>>>>>>>>>>>>> data in to emoncms... for which i have all the hardware but lacking the
>>>>>>>>>>>>>>>>>> software
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I guess the biggest question is what do you want from an
>>>>>>>>>>>>>>>>>>> integration with OEM? Are we talking about just getting data in to EmonCMS?
>>>>>>>>>>>>>>>>>>> Do you want the OpenTRV radio link to directly talk with an EmonBase?
>>>>>>>>>>>>>>>>>>> Something in between?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> This is also why i argue that we should take the cost
>>>>>>>>>>>>>>>>>>>> of 2 so he can get going
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring
>>>>>>>>>>>>>>>>>>>> us what we want...
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <
>>>>>>>>>>>>>>>>>>>> dhd at exnet.com>:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> > What I'm particulary interested in is integration
>>>>>>>>>>>>>>>>>>>>> with open energy monitor. That's why I would like to ask if there's a
>>>>>>>>>>>>>>>>>>>>> possibility to get a hold of a couple of boards to do some testing /
>>>>>>>>>>>>>>>>>>>>> development on. Also any links to ongoing discussion on these integration
>>>>>>>>>>>>>>>>>>>>> might be useful.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On this part, there is discussion in here, and there
>>>>>>>>>>>>>>>>>>>>> is an OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in
>>>>>>>>>>>>>>>>>>>>> London.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> This is clearly not the only integration that OpenTRV
>>>>>>>>>>>>>>>>>>>>> should be doing, but it is an important one and it’s frustrating to me that
>>>>>>>>>>>>>>>>>>>>> we have not already gotten further!
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> OpenTRV-dev mailing list
>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>
>>>>
>>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/07eb9d35/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 23723 bytes
Desc: not available
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/07eb9d35/attachment-0001.png>