[OpenTRV-dev] OpenTRV boards

Bo Herrmannsen bo.herrmannsen at gmail.com
Thu Dec 17 10:40:43 GMT 2015 

thanks for that...

they changed the input part recently so maybe the module used the old
link....

anyway we will see how it works

so once i deploy will i start to see data from all the units arround the
flat? or do i need to tweak it more?

2015-12-17 11:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:

> No, just the base directory;
>
> [image: Inline images 2]
>
> Jeremy
>
> On 17 December 2015 at 10:29, Bo Herrmannsen <bo.herrmannsen at gmail.com>
> wrote:
>
>> i have some scripts that i use to import solar data from a rooftop
>> installed panel....
>>
>> 'http://127.0.0.1/emoncms/input/post?apikey
>>
>> so i change emoncms.org to match up .... but should i include input/post
>> or does the module add that?
>>
>> 2015-12-17 11:22 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>
>>> i see you both have emonbase and emoncms...
>>>
>>> since i only store data local i guess i can delete emonbase?
>>>
>>> 2015-12-17 11:20 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>
>>>> about the setup
>>>>
>>>> we use the same usb port config so i guess there is no need to change
>>>> that...
>>>>
>>>> are there other things i need to change?
>>>>
>>>> 2015-12-17 11:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>
>>>>> Yes, you probably need to restart. If you followed the instructions on
>>>>> the Node-RED site it should be;
>>>>>
>>>>>   pm2 restart node-red
>>>>>
>>>>> Jeremy
>>>>>
>>>>> On 17 December 2015 at 09:57, Bo Herrmannsen <bo.herrmannsen at gmail.com
>>>>> > wrote:
>>>>>
>>>>>> that was install.... i guess i have to restart node-red before it is
>>>>>> loaded?
>>>>>>
>>>>>> if so what is the right command here? sudo service ***** restart or
>>>>>> something else?
>>>>>>
>>>>>> 2015-12-17 10:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>
>>>>>>> The TCP Server flow is a sub flow that provides the 'telnet' access
>>>>>>> directly to the serial port, allowing some form of remote control although
>>>>>>> only really intended for debugging. the snapshot you sent it looks like
>>>>>>> this has been loaded ok anyway.
>>>>>>>
>>>>>>> The EmonCMS stuff is an extra step you need to do after the node-RED
>>>>>>> install, see
>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/node-red-emoncms-node.html
>>>>>>>
>>>>>>> Jeremy
>>>>>>>
>>>>>>> On 17 December 2015 at 00:10, Bo Herrmannsen <
>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>
>>>>>>>> imported the opentrv.json
>>>>>>>>
>>>>>>>> http://imgur.com/uFypiO3
>>>>>>>>
>>>>>>>> it says that emoncms is not recognized/known... but i guess there
>>>>>>>> is a fix for that
>>>>>>>>
>>>>>>>> should the TCP server also be imported... and if so how?
>>>>>>>>
>>>>>>>> 2015-12-17 0:31 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>
>>>>>>>>> All of it should basically be reusable, should just be the serial
>>>>>>>>> port and emoncms server setup that needs changing (and I hope those are not
>>>>>>>>> in the code I shared ;-)
>>>>>>>>>
>>>>>>>>> Feel free to IM me via Hangouts or I can jump or the IRC tomorrow
>>>>>>>>> and we can go through the process together, that should help with my
>>>>>>>>> documentation.
>>>>>>>>>
>>>>>>>>> Jeremy
>>>>>>>>>
>>>>>>>>> On 16 December 2015 at 23:05, Bo Herrmannsen <
>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> yep there was a | spinning...
>>>>>>>>>>
>>>>>>>>>> but installed now... setting it up to start at boot
>>>>>>>>>>
>>>>>>>>>> tomorrow the fun begins with setting up the flow.... how much of
>>>>>>>>>> your flow can i reuse?
>>>>>>>>>>
>>>>>>>>>> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>>
>>>>>>>>>>> Node-RED? I think it was a while but IIRC there was at least a
>>>>>>>>>>> sign of it doing something.
>>>>>>>>>>>
>>>>>>>>>>> Jeremy
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 16 December 2015 at 20:39, Bo Herrmannsen <
>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> hehe.... a over night install....
>>>>>>>>>>>>
>>>>>>>>>>>> or how long should the install take?
>>>>>>>>>>>>
>>>>>>>>>>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <
>>>>>>>>>>>> bo.herrmannsen at gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> oki doke...
>>>>>>>>>>>>>
>>>>>>>>>>>>> on it.... i'm just eager to get room temps looged so i can
>>>>>>>>>>>>> compare outside to inside temp and how much heat i suck from the district
>>>>>>>>>>>>> heating
>>>>>>>>>>>>>
>>>>>>>>>>>>> on top the building *society
>>>>>>>>>>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>>>>>>>>>>> rent my flat from replaces all windows and external doors with better
>>>>>>>>>>>>> onces... the current ones are as good as the fly net in a tent*
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <
>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> would this page make do for installing node red?
>>>>>>>>>>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> in my case a ras pi 1... so about half way down.... not on
>>>>>>>>>>>>>>> the jessie image
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> One is the input and the other is the output, both go to
>>>>>>>>>>>>>>>> the same physical serial port.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <
>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> looking at the flow picture....
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS
>>>>>>>>>>>>>>>>>> (see the post OpenTRV, EmonCMS and Node-RED
>>>>>>>>>>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>>>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> With regard to the back channel I do not believe that the
>>>>>>>>>>>>>>>>>> EmonCMS architecture has been built to accommodate this. It is only really
>>>>>>>>>>>>>>>>>> for data storage/analyses. So I think you need something else for the
>>>>>>>>>>>>>>>>>> control side of things.  Have a look at;
>>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> and so would i... but i could live with just getting the
>>>>>>>>>>>>>>>>>>> data in to emoncms... for which i have all the hardware but lacking the
>>>>>>>>>>>>>>>>>>> software
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I guess the biggest question is what do you want from
>>>>>>>>>>>>>>>>>>>> an integration with OEM? Are we talking about just getting data in to
>>>>>>>>>>>>>>>>>>>> EmonCMS? Do you want the OpenTRV radio link to directly talk with an
>>>>>>>>>>>>>>>>>>>> EmonBase? Something in between?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> This is also why i argue that we should take the cost
>>>>>>>>>>>>>>>>>>>>> of 2 so he can get going
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon bring
>>>>>>>>>>>>>>>>>>>>> us what we want...
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <
>>>>>>>>>>>>>>>>>>>>> dhd at exnet.com>:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> > What I'm particulary interested in is integration
>>>>>>>>>>>>>>>>>>>>>> with open energy monitor. That's why I would like to ask if there's a
>>>>>>>>>>>>>>>>>>>>>> possibility to get a hold of a couple of boards to do some testing /
>>>>>>>>>>>>>>>>>>>>>> development on. Also any links to ongoing discussion on these integration
>>>>>>>>>>>>>>>>>>>>>> might be useful.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On this part, there is discussion in here, and there
>>>>>>>>>>>>>>>>>>>>>> is an OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in
>>>>>>>>>>>>>>>>>>>>>> London.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> This is clearly not the only integration that OpenTRV
>>>>>>>>>>>>>>>>>>>>>> should be doing, but it is an important one and it’s frustrating to me that
>>>>>>>>>>>>>>>>>>>>>> we have not already gotten further!
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> OpenTRV-dev mailing list
>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>
>>>>>
>>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/c166f60d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 23723 bytes
Desc: not available
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/c166f60d/attachment-0001.png>

More information about the OpenTRV-dev mailing list