[OpenTRV-dev] OpenTRV boards

Jeremy Poulter jeremy at bigjungle.net
Thu Dec 17 10:43:58 GMT 2015


In theory ;-) Although I only have one unit so we may need some tweaking to
handle more than one.

Jeremy

On 17 December 2015 at 10:40, Bo Herrmannsen <bo.herrmannsen at gmail.com>
wrote:

> thanks for that...
>
> they changed the input part recently so maybe the module used the old
> link....
>
> anyway we will see how it works
>
> so once i deploy will i start to see data from all the units arround the
> flat? or do i need to tweak it more?
>
> 2015-12-17 11:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>
>> No, just the base directory;
>>
>> [image: Inline images 2]
>>
>> Jeremy
>>
>> On 17 December 2015 at 10:29, Bo Herrmannsen <bo.herrmannsen at gmail.com>
>> wrote:
>>
>>> i have some scripts that i use to import solar data from a rooftop
>>> installed panel....
>>>
>>> 'http://127.0.0.1/emoncms/input/post?apikey
>>>
>>> so i change emoncms.org to match up .... but should i include
>>> input/post or does the module add that?
>>>
>>> 2015-12-17 11:22 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>
>>>> i see you both have emonbase and emoncms...
>>>>
>>>> since i only store data local i guess i can delete emonbase?
>>>>
>>>> 2015-12-17 11:20 GMT+01:00 Bo Herrmannsen <bo.herrmannsen at gmail.com>:
>>>>
>>>>> about the setup
>>>>>
>>>>> we use the same usb port config so i guess there is no need to change
>>>>> that...
>>>>>
>>>>> are there other things i need to change?
>>>>>
>>>>> 2015-12-17 11:13 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>
>>>>>> Yes, you probably need to restart. If you followed the instructions
>>>>>> on the Node-RED site it should be;
>>>>>>
>>>>>>   pm2 restart node-red
>>>>>>
>>>>>> Jeremy
>>>>>>
>>>>>> On 17 December 2015 at 09:57, Bo Herrmannsen <
>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>
>>>>>>> that was install.... i guess i have to restart node-red before it is
>>>>>>> loaded?
>>>>>>>
>>>>>>> if so what is the right command here? sudo service ***** restart or
>>>>>>> something else?
>>>>>>>
>>>>>>> 2015-12-17 10:37 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>
>>>>>>>> The TCP Server flow is a sub flow that provides the 'telnet' access
>>>>>>>> directly to the serial port, allowing some form of remote control although
>>>>>>>> only really intended for debugging. the snapshot you sent it looks like
>>>>>>>> this has been loaded ok anyway.
>>>>>>>>
>>>>>>>> The EmonCMS stuff is an extra step you need to do after the
>>>>>>>> node-RED install, see
>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/node-red-emoncms-node.html
>>>>>>>>
>>>>>>>> Jeremy
>>>>>>>>
>>>>>>>> On 17 December 2015 at 00:10, Bo Herrmannsen <
>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> imported the opentrv.json
>>>>>>>>>
>>>>>>>>> http://imgur.com/uFypiO3
>>>>>>>>>
>>>>>>>>> it says that emoncms is not recognized/known... but i guess there
>>>>>>>>> is a fix for that
>>>>>>>>>
>>>>>>>>> should the TCP server also be imported... and if so how?
>>>>>>>>>
>>>>>>>>> 2015-12-17 0:31 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>
>>>>>>>>>> All of it should basically be reusable, should just be the serial
>>>>>>>>>> port and emoncms server setup that needs changing (and I hope those are not
>>>>>>>>>> in the code I shared ;-)
>>>>>>>>>>
>>>>>>>>>> Feel free to IM me via Hangouts or I can jump or the IRC tomorrow
>>>>>>>>>> and we can go through the process together, that should help with my
>>>>>>>>>> documentation.
>>>>>>>>>>
>>>>>>>>>> Jeremy
>>>>>>>>>>
>>>>>>>>>> On 16 December 2015 at 23:05, Bo Herrmannsen <
>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> yep there was a | spinning...
>>>>>>>>>>>
>>>>>>>>>>> but installed now... setting it up to start at boot
>>>>>>>>>>>
>>>>>>>>>>> tomorrow the fun begins with setting up the flow.... how much of
>>>>>>>>>>> your flow can i reuse?
>>>>>>>>>>>
>>>>>>>>>>> 2015-12-17 0:03 GMT+01:00 Jeremy Poulter <jeremy at bigjungle.net>:
>>>>>>>>>>>
>>>>>>>>>>>> Node-RED? I think it was a while but IIRC there was at least a
>>>>>>>>>>>> sign of it doing something.
>>>>>>>>>>>>
>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On 16 December 2015 at 20:39, Bo Herrmannsen <
>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> hehe.... a over night install....
>>>>>>>>>>>>>
>>>>>>>>>>>>> or how long should the install take?
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2015-12-16 20:35 GMT+01:00 Bo Herrmannsen <
>>>>>>>>>>>>> bo.herrmannsen at gmail.com>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> oki doke...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> on it.... i'm just eager to get room temps looged so i can
>>>>>>>>>>>>>> compare outside to inside temp and how much heat i suck from the district
>>>>>>>>>>>>>> heating
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> on top the building *society
>>>>>>>>>>>>>> <https://www.google.dk/search?q=society&spell=1&sa=X&ved=0ahUKEwiv7YLnj-HJAhVk8HIKHc1aAOgQvwUIGCgA> i
>>>>>>>>>>>>>> rent my flat from replaces all windows and external doors with better
>>>>>>>>>>>>>> onces... the current ones are as good as the fly net in a tent*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2015-12-16 20:13 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Correct, that is the instructions I used on a RPi B.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>> On 16 Dec 2015 18:55, "Bo Herrmannsen" <
>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> would this page make do for installing node red?
>>>>>>>>>>>>>>>> http://nodered.org/docs/hardware/raspberrypi.html
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> in my case a ras pi 1... so about half way down.... not on
>>>>>>>>>>>>>>>> the jessie image
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 2015-12-16 19:45 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> One is the input and the other is the output, both go to
>>>>>>>>>>>>>>>>> the same physical serial port.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>> On 16 Dec 2015 18:42, "Bo Herrmannsen" <
>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> looking at the flow picture....
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> i see 2 opentrv serials.... why is that?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> 2015-12-16 18:32 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I certainly have the data going from OpenTRV to EmonCMS
>>>>>>>>>>>>>>>>>>> (see the post OpenTRV, EmonCMS and Node-RED
>>>>>>>>>>>>>>>>>>> <http://lists.opentrv.org.uk/pipermail/opentrv-dev/2015-November/001812.html>)
>>>>>>>>>>>>>>>>>>> and I am working on some more detailed instructions on the setup.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> With regard to the back channel I do not believe that
>>>>>>>>>>>>>>>>>>> the EmonCMS architecture has been built to accommodate this. It is only
>>>>>>>>>>>>>>>>>>> really for data storage/analyses. So I think you need something else for
>>>>>>>>>>>>>>>>>>> the control side of things.  Have a look at;
>>>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/11/remote-control-of-lightwave-rf-plugs.html
>>>>>>>>>>>>>>>>>>>  -
>>>>>>>>>>>>>>>>>>> http://openenergymonitor.blogspot.co.uk/2015/12/openenergymonitor-emonpi-and-openhab.html
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 16 December 2015 at 16:22, Bo Herrmannsen <
>>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> i think he wants 2 way control so to speak
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> and so would i... but i could live with just getting
>>>>>>>>>>>>>>>>>>>> the data in to emoncms... for which i have all the hardware but lacking the
>>>>>>>>>>>>>>>>>>>> software
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 2015-12-16 17:16 GMT+01:00 Jeremy Poulter <
>>>>>>>>>>>>>>>>>>>> jeremy at bigjungle.net>:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I guess the biggest question is what do you want from
>>>>>>>>>>>>>>>>>>>>> an integration with OEM? Are we talking about just getting data in to
>>>>>>>>>>>>>>>>>>>>> EmonCMS? Do you want the OpenTRV radio link to directly talk with an
>>>>>>>>>>>>>>>>>>>>> EmonBase? Something in between?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Jeremy
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On 16 December 2015 at 11:09, Bo Herrmannsen <
>>>>>>>>>>>>>>>>>>>>> bo.herrmannsen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> This is also why i argue that we should take the cost
>>>>>>>>>>>>>>>>>>>>>> of 2 so he can get going
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> OEM is always busy and i doubt that the hackahon
>>>>>>>>>>>>>>>>>>>>>> bring us what we want...
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> 2015-12-16 12:06 GMT+01:00 Damon Hart-Davis <
>>>>>>>>>>>>>>>>>>>>>> dhd at exnet.com>:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> > What I'm particulary interested in is integration
>>>>>>>>>>>>>>>>>>>>>>> with open energy monitor. That's why I would like to ask if there's a
>>>>>>>>>>>>>>>>>>>>>>> possibility to get a hold of a couple of boards to do some testing /
>>>>>>>>>>>>>>>>>>>>>>> development on. Also any links to ongoing discussion on these integration
>>>>>>>>>>>>>>>>>>>>>>> might be useful.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On this part, there is discussion in here, and there
>>>>>>>>>>>>>>>>>>>>>>> is an OEM/OpenTRV hackathon scheduled for 18th February at the BCS HQ in
>>>>>>>>>>>>>>>>>>>>>>> London.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> This is clearly not the only integration that
>>>>>>>>>>>>>>>>>>>>>>> OpenTRV should be doing, but it is an important one and it’s frustrating to
>>>>>>>>>>>>>>>>>>>>>>> me that we have not already gotten further!
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Rgds
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Damon
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OpenTRV-dev mailing list
>>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> OpenTRV-dev mailing list
>>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenTRV-dev mailing list
>>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> OpenTRV-dev mailing list
>>>>>> OpenTRV-dev at lists.opentrv.org.uk
>>>>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> OpenTRV-dev mailing list
>>> OpenTRV-dev at lists.opentrv.org.uk
>>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>>
>>>
>>
>> _______________________________________________
>> OpenTRV-dev mailing list
>> OpenTRV-dev at lists.opentrv.org.uk
>> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>>
>>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/516b286d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 23723 bytes
Desc: not available
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20151217/516b286d/attachment-0001.png>


More information about the OpenTRV-dev mailing list