[OpenTRV-dev] REV7 board working and talking!

[Bo Herrmannsen]

i have my units set for 14 degrees frost and 20 degree in warm mode

given an avg. RH of 65 i will just stay clear of mold...

but if RH goes to 69 it says i will get mold within 236 days...

now that does not take in to account that i have vent slots on top of all
my windows except the door to the balcony and the small window in bath...
bath have a hole connected to the building vent that runs 24/7 same does
the exhaust over the stove...

so i will not have an issue, but i can only imagine how fast things would
happen in an unventilated house with low heat

2015-01-05 19:56 GMT+01:00 Bo Herrmannsen <EMAIL ADDRESS HIDDEN>:

> http://www.dpcalc.org/
>
> that one is fun to play with.... now if i could only figure my RH....
>
> but if you go extreme on that page it can say how many days will pass
> before mold starts to grow...
>
> 2015-01-05 19:52 GMT+01:00 Damon Hart-Davis <EMAIL ADDRESS HIDDEN>:
>
>> Hi,
>>
>> The bigger issue is to work out what we *want* to do.
>>
>> For example, I don’t want to waste energy turning *up* the target
>> temperature unnecessarily.
>>
>> What it might be good to know is a set of danger temperatures and RH% for
>> (say) mould growth, plus mite growth, and have a way of deflecting the
>> target temperatures around those values.  But it will be subtle and
>> generally we want to manage things by reducing temperature.
>>
>> A ‘bathroom’ mode might be different, maybe doing a BAKE if humidity goes
>> too high.  (Though a recent trialist feedback would suggest that might not
>> be universally popular.)
>>
>> Rgds
>>
>> Damon
>>
>> > On 5 Jan 2015, at 18:45, Bo Herrmannsen <EMAIL ADDRESS HIDDEN>
>> wrote:
>> >
>> > i know there are some fancy formulas to figure the condensations
>> point... if you dont have them i could dig out a few... i had them up while
>> thinking of watercool my pc and i dont want to get the water so cold that i
>> get dew inside the pc
>> >
>> > 2015-01-05 19:42 GMT+01:00 Damon Hart-Davis <EMAIL ADDRESS HIDDEN>:
>> > Hi,
>> >
>> > All I do with humidity at the moment is raise the frost temperature if
>> humidity is high (to try to reduce/avoid condensation).
>> >
>> > I haven’t had time to do more with it than that (and report it, which
>> is useful for one trial we will be in).
>> >
>> > Rgds
>> >
>> > Damon
>> >
>> >
>> > > On 5 Jan 2015, at 18:37, Bo Herrmannsen <EMAIL ADDRESS HIDDEN>
>> wrote:
>> > >
>> > > one of them are humidity.... i long time ago said that it should be
>> implemented at some point so temp will be raised if humidity goes up.... as
>> to avoid damp cellars, baths etc etc... in the end preventing fungus etc
>> > >
>> > > 2015-01-05 19:19 GMT+01:00 Bruno Girin <EMAIL ADDRESS HIDDEN>:
>> > > Right, so let me try to decode this:
>> > > T|C16 is (measured) temperature in Celsius with hexadecimal fraction.
>> > > vC|% and v|% are probably the valve opening percentage but what are
>> the 2 values?
>> > > tT|C is the target temperature in Celsius.
>> > > No idea what O and vac|h are.
>> > >
>> > > Also, if % indicates a percentage, why do we have a value of 196 for
>> vC|% in the last record?
>> > >
>> > > Bruno
>> > >
>> > >
>> > > Bruno Girin, CTO, EnergyDeck Ltd
>> > > Email: EMAIL ADDRESS HIDDEN, Mobile: +44 7990 545 927, Tel: +44 20
>> 3108 9365
>> > > Web: www.energydeck.com, Twitter: @EnergyDeck
>> > > Address: IDEALondon, 69 Wilson Street, Shoreditch, London EC2A 2BB, UK
>> > >
>> > >
>> > > On 5 January 2015 at 18:05, Damon Hart-Davis <EMAIL ADDRESS HIDDEN> wrote:
>> > > After a small hardware mod (around the 32768Hz crystal) the REV7
>> production board is working!
>> > >
>> > > (I haven’t tried the motor stuff yet, note.)
>> > >
>> > > First (logged, JSON stats) radio comms for the record (I rebooted it
>> after the first one, and turned off privacy after the second one)!
>> > >
>> > > [ "2015-01-05T17:15:53Z", "", {"@":"dd82","+":0} ]
>> > > [ "2015-01-05T17:16:23Z", "", {"@":"dd82","+":0} ]
>> > > [ "2015-01-05T17:33:27Z", "",
>> {"@":"dd82","+":1,"T|C16":285,"O":3,"vac|h":0} ]
>> > > [ "2015-01-05T17:39:29Z", "",
>> {"@":"dd82","+":2,"vC|%":100,"v|%":100,"tT|C":27} ]
>> > > [ "2015-01-05T17:42:27Z", "",
>> {"@":"dd82","+":3,"T|C16":286,"O":3,"vac|h":0} ]
>> > > [ "2015-01-05T17:45:27Z", "",
>> {"@":"dd82","+":4,"v|%":4,"vC|%":196,"tT|C":7} ]
>> > >
>> > > Note that this means that most subsystems are working including the
>> PCB antenna, which is a huge relief!
>> > >
>> > > Rgds
>> > >
>> > > Damon
>> > >
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > OpenTRV-dev mailing list
>> > > EMAIL ADDRESS HIDDEN
>> > > http://lists.opentrv.org.uk/listinfo/opentrv-dev
>> > >
>> > >
>> >
>> >
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20150105/4847f3de/attachment-0001.html>