[OpenTRV-dev] beta build

[Bo Herrmannsen]

thought i would add teh dev list and david and tell what folder is for what

as for sheets:

https://github.com/boelle/TVRRUG_Round4_SD_Card/tree/master/Sheets/Common
                    for common sheets
https://github.com/boelle/TVRRUG_Round4_SD_Card/tree/master/Sheets/New%20builds
             is sheets on new builds, it has hole pattern for ramps
electronics and our 12V 30A PSU
https://github.com/boelle/TVRRUG_Round4_SD_Card/tree/master/Sheets/Upgraders
                   are sheets for upgraders, it has holes for round3
electronics and 12V30A PSU

gantry, y carriage, and left plus heatshield are common

the base differs due to lenght of rods, but its only the longer y rod that
make the base differ. on upgraders the longer one has to be max 404mm but
on new builds we stick to what nophead spec's in his scripts

 the right "stay" also differs, but only due to electronics. new builds
will have hole pattern for ramps, upgraders can fit round3 electronics.

https://github.com/boelle/TVRRUG_Round4_SD_Card/tree/master/Printed%20Parts

is folder with printed parts... inside it is a printed folder and i belive
that one is to make life for printers easy as the parts are grouped up, but
in the end you should end up with the same parts

https://github.com/boelle/TVRRUG_Round4_SD_Card/blob/master/Printed%20Parts/1.%20Infill%20settings.txt

has infill settings for the parts



does it make sense?

/bo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20150107/84d49b3a/attachment.html>