[OpenTRV-dev] Radiator debugging and re-calibration

[Bo Herrmannsen]

i would also now strongly look at the valve itself in the pipe works

i guess its stuck or some dirt is in there

2016-10-22 18:38 GMT+02:00 Bruno Girin <brunogirin at gmail.com>:

>
>
> On 22 October 2016 at 11:49, Damon Hart-Davis <dhd at exnet.com> wrote:
>
>>
>> > On 22 Oct 2016, at 10:27, Bruno Girin <brunogirin at gmail.com> wrote:
>> >
>> > So the question is: how do you identify the root cause and fix for such
>> a problem? Could it be due to the valve having somehow been de-calibrated
>> during the summer while it wasn't in use?
>>
>> In this case I’d make sure that the valve pin is not stuck (take the
>> Conrad head off and manually operate the pin a couple of cycles) and then
>> resync everything.
>>
>
> I'll do that thanks and see if it fixes it.
>
> Bruno
>
>
> _______________________________________________
> OpenTRV-dev mailing list
> OpenTRV-dev at lists.opentrv.org.uk
> http://lists.opentrv.org.uk/listinfo/opentrv-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opentrv.org.uk/pipermail/opentrv-dev/attachments/20161022/ba927b9d/attachment.html>